Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
FRA:DAS's Price-to-Net-Cash is not ranked *
in the Industrial Products industry.
Industry Median: 9.8 * Ranked among companies with meaningful Price-to-Net-Cash only.
Danieli & C. Officine Meccaniche SpA (FRA:DAS) Net Cash per Share Explanation
Ben Graham invested in situations where the company's stock price was lower than its net-cash. He assigned some value to the company's other current asset. The value is called Net Current Asset Value (NCAV). One research study, covering the years 1970 through 1983 showed that portfolios picked at the beginning of each year, and held for one year, returned 29.4 percent, on average, over the 13-year period, compared to 11.5 percent for the S&P 500 Index. Other studies of Graham's strategy produced similar results.
You can find companies that are traded below their Net Current Asset Value (NCAV) with our Net-Net screener.
Danieli & C. Officine Meccaniche SpA Net Cash per Share Related Terms
Danieli & C. Officine Meccaniche SpA Net Cash per Share Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Net Cash per Share Chart
FRA:DAS vs GEV, ETN, PH: Net Cash per Share Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Price-to-Net-Cash, along with its competitors' market caps and Price-to-Net-Cash data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Price-to-Net-Cash vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Price-to-Net-Cash distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Price-to-Net-Cash falls into.
Danieli & C. Officine Meccaniche SpA Net Cash per Share Calculation
In the calculation of a company's Net Cash per Share, assets other than cash and short term investments are considered to be worth nothing. But the company has to pay its debt and other liabilities in full. This is an extremely conservative way of valuation. Most companies have negative Net Cash per Share. But sometimes a company's price may be lower than its net-cash.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA (FRA:DAS) has a Net Cash per Share of €-29.11 as of Dec. 2025. Net cash per share equals the per-share value of cash and equivalents less total liabilities and minority interest. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #999999 out of 609 companies in the Industrial Products industry.
Is Danieli & C. Officine Meccaniche SpA's Net Cash per Share too high?
Danieli & C. Officine Meccaniche SpA's current Net Cash per Share is €-29.11. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #999999 out of 609 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Net Cash per Share compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #999999 out of 609 companies for Net Cash per Share. This places Danieli & C. Officine Meccaniche SpA in the lower half of its industry. The industry median Net Cash per Share is 9.80. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net Cash per Share for an Industrial Products company?
The median Net Cash per Share among Industrial Products companies is 9.80, based on 609 companies in the industry. Companies in the top quartile (top 25%) have a Net Cash per Share significantly above this median, while those in the bottom quartile fall well below. However, Net Cash per Share should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net Cash per Share mean?
A high Net Cash per Share can signal that a stock is expensive relative to its fundamentals. Net cash per share equals the per-share value of cash and equivalents less total liabilities and minority interest. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Net Cash per Share is 9.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Net Cash per Share is €-29.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.59, compared to a current price of €63.40 — trading 107.3% above its estimated fair value. The current Net Cash per Share is €-29.11. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 70/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net Cash per Share calculated?
Net Cash per Share is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS), the current Net Cash per Share is €-29.11 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €63.40 is trading 107.3% above its estimated GF Value™ of €30.59.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS:
Net Cash per Share: €-29.11
GF Value™: €30.59 vs. price of €63.40 (107.3% above fair value)
No single metric tells the full story. See the FRA:DAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
70GF Score
Get the complete analysis for FRA:DAS
Net Cash per Share is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS has been successfully added to your 
