Chun Yu WorksTPE:2012 +1.68%61 EBITDA Margin % is 7.80% as of Dec. 2025, which is 23% below its 10-year median of 10.09. GuruFocus rates TPE:2012 with a GF Score™ of 61/100 and a GF Value™ of NT$19.24 (Modestly Undervalued). The stock has 9 warning signs investors should review. Among 616 Steel companies, Chun Yu Works ranks better than 60.06% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Chun Yu Works's EBITDA for the
three
months ended in Dec. 2025 was NT$150 Mil. Chun Yu Works's Revenue for the
three
months ended in Dec. 2025 was NT$1,926 Mil. Therefore, Chun Yu Works's EBITDA margin for the quarter that ended in Dec. 2025 was 7.80%.
Chun Yu Works (TPE:2012) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Chun Yu Works EBITDA Margin % Related Terms
Chun Yu Works EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Chun Yu Works's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2012 vs NUE, STLD, RS: EBITDA Margin % Comparison
For the Steel subindustry, Chun Yu Works's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chun Yu Works EBITDA Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Chun Yu Works's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Chun Yu Works's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chun Yu Works (TPE:2012) has a EBITDA Margin % of 7.80% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chun Yu Works and its competitors. This is 23% below median its historical median of 10.09. Over the past decade, Chun Yu Works' EBITDA Margin % has ranged from 7.88 to 12.71. According to the industry distribution chart, Chun Yu Works ranks #246 out of 616 companies in the Steel industry, placing it in the top 39.9%.
Is Chun Yu Works' EBITDA Margin % too high?
Chun Yu Works' current EBITDA Margin % of 7.80% is 23% below median its 10-year median of 10.09. Over the past 10 years, this metric has ranged from a low of 7.88 to a high of 12.71. The Steel industry median EBITDA Margin % is 6.18. Chun Yu Works' value of 7.80% is 26.2% above this industry median. Based on the distribution chart, Chun Yu Works ranks #246 out of 616 companies in the Steel industry, which is above the industry midpoint. Overall, Chun Yu Works has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chun Yu Works' EBITDA Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Chun Yu Works ranks #246 out of 616 companies for EBITDA Margin %. This puts Chun Yu Works in the upper half of its industry. The industry median EBITDA Margin % is 6.18. Chun Yu Works' value of 7.80% is 26.2% above this benchmark. Historically, Chun Yu Works' own EBITDA Margin % has ranged from 7.88 to 12.71 over the past decade. While the company's 10-year median is 10.09 vs. the industry median of 6.18, Chun Yu Works has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Steel company?
The median EBITDA Margin % among Steel companies is 6.18, based on 616 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chun Yu Works's current EBITDA Margin % of 7.80% is 26.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chun Yu Works and its competitors. For the Steel industry, the median EBITDA Margin % is 6.18 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chun Yu Works's current EBITDA Margin % is 7.80%, which is 23% below median its own 10-year median of 10.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chun Yu Works stock overvalued right now?
Based on GuruFocus' analysis, Chun Yu Works (TPE:2012) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$19.24, compared to a current price of NT$15.15 — trading 21.3% below its estimated fair value. The current EBITDA Margin % is 7.80%, which is 23% below median its 10-year median of 10.09 and 26.2% above the Steel industry median of 6.18. Chun Yu Works' overall GF Score™ is 61/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Chun Yu Works (TPE:2012), the current EBITDA Margin % is 7.80% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chun Yu Works (TPE:2012) Overvalued in 2026?
Based on GuruFocus' analysis, Chun Yu Works stock appears to be undervalued.
The current stock price of NT$15.15 is trading 21.3% below its estimated GF Value™ of NT$19.24.
GuruFocus considers Chun Yu Works to be Modestly Undervalued.
Key valuation signals for TPE:2012:
EBITDA Margin %: 7.80% (23% below median its 10-year median of 10.09)
GF Value™: NT$19.24 vs. price of NT$15.15 (21.3% below fair value)
Industry Position: 26.2% above the Steel median (#246 of 616)
No single metric tells the full story. See the TPE:2012 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chun Yu Works & Co Ltd manufactures steel products. The Company is engaged in the manufacture and sales of screws, nuts and wire rods, and other related products. The company's product portfolio comprises aerospace fasteners and medical equipment, automotive fasteners, cold drown wire and annealing wire, bolts, nuts, and self-tapping screws, and others. The group's reportable segment consists of the Screw segment; mainly engaged in the manufacture, process, and trade of screws and nuts. This segment generates the majority of the revenue. The machinery segment is engaged in the manufacture, assembly, and trade of machine tools and chemical machinery. The investment segment engages in general investment.
61GF Score
Get the complete analysis for TPE:2012
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2012 has been successfully added to your 
