Chun Yu WorksTPE:2012 +0.99%65 Altman Z2-Score is 3.11 as of Jun. 26, 2026, which is 1% below its 10-year median of 3.13. GuruFocus rates TPE:2012 with a GF Score™ of 65/100 and a GF Value™ of NT$19.24 (Modestly Undervalued). The stock has 9 warning signs investors should review. Among 632 Steel companies, Chun Yu Works ranks worse than 54.75% on this metric.
Altman Z2-Score, also known as Z"-Score, is used to predict the likelihood that a non-manufacturing company (excluding property/financial company) will face bankruptcy within a two-year period.
Good Sign:
Chun Yu Works has a Altman Z2-Score of 3.11, indicating it is in Safe Zones. This implies the Altman Z2-Score is strong.
The zones of discrimination were as such:
When Altman Z2-Score <= 1.1, it is in Distress Zones.
When Altman Z2-Score >= 2.6, it is in Safe Zones.
When Altman Z2-Score is between 1.1 and 2.6, it is in Grey Zones.
The historical rank and industry rank for Chun Yu Works's Altman Z2-Score or its related term are showing as below:
TPE:2012'
s Altman Z2-Score Range Over the Past 10 Years
Min: 1.7 Med: 3.13 Max: 4.61
Current: 3.1
During the past 13 years, Chun Yu Works's highest Altman Z2-Score was 4.61. The lowest was 1.70. And the median was 3.13.
Chun Yu Works (TPE:2012) Altman Z2-Score Explanation
The original Z-Score model was based on publicly traded manufacturing companies while the Z2-Score, also known as Z"-score can be used for any type of company excluding property/financial companies. Both Z-Score and Z2-Score describes the financial health of a company, and its likelihood of financial distress.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
Altman Z2-Score does not apply to financial companies.
Chun Yu Works Altman Z2-Score Related Terms
Chun Yu Works Altman Z2-Score Historical Data
* Premium members only.
The historical data trend for Chun Yu Works's Altman Z2-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2012 vs NUE, STLD, RS: Altman Z2-Score Comparison
For the Steel subindustry, Chun Yu Works's Altman Z2-Score, along with its competitors' market caps and Altman Z2-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chun Yu Works Altman Z2-Score vs Steel Industry
For the Steel industry and Basic Materials sector, Chun Yu Works's Altman Z2-Score distribution charts can be found below:
* The bar in red indicates where Chun Yu Works's Altman Z2-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Z2-Score, also known as Z"-Score is the Z-Score for non-manufacturing companies excluding property/financial companies.
Chun Yu Works's Altman Z2-Score for today is calculated with this formula:
Z
=
6.56
*
X1
+
3.26
*
X2
+
6.72
*
X3
+
1.05
*
X4_2
=
6.56
*
0.3396
+
3.26
*
0.0289
+
6.72
*
0.0296
+
1.05
*
0.5564
=
3.11
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z2-Score when X4_2 value is 0.
Chun Yu Works (TPE:2012) has a Altman Z2-Score of 3.11 as of Jun. 26, 2026. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Chun Yu Works and its competitors. This is near median its historical median of 3.13. Over the past decade, Chun Yu Works' Altman Z2-Score has ranged from 1.70 to 4.61. According to the industry distribution chart, Chun Yu Works ranks #346 out of 632 companies in the Steel industry, placing it in the top 54.7%.
Is Chun Yu Works' Altman Z2-Score too high?
Chun Yu Works' current Altman Z2-Score of 3.11 is near median its 10-year median of 3.13. Over the past 10 years, this metric has ranged from a low of 1.70 to a high of 4.61. The Steel industry median Altman Z2-Score is 3.46. Chun Yu Works' value of 3.11 is 10.1% below this industry median. Based on the distribution chart, Chun Yu Works ranks #346 out of 632 companies in the Steel industry, which is below the industry midpoint. Overall, Chun Yu Works has a GF Score™ of 65/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chun Yu Works' Altman Z2-Score compare to NUE and STLD?
According to the Steel industry distribution chart, Chun Yu Works ranks #346 out of 632 companies for Altman Z2-Score. This places Chun Yu Works in the lower half of its industry. The industry median Altman Z2-Score is 3.46. Chun Yu Works' value of 3.11 is 10.1% below this benchmark. Historically, Chun Yu Works' own Altman Z2-Score has ranged from 1.70 to 4.61 over the past decade. While the company's 10-year median is 3.13 vs. the industry median of 3.46, Chun Yu Works has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z2-Score for a Steel company?
The median Altman Z2-Score among Steel companies is 3.46, based on 632 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z2-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z2-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chun Yu Works's current Altman Z2-Score of 3.11 is 10.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z2-Score mean?
A high Altman Z2-Score can signal that a stock is expensive relative to its fundamentals. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Chun Yu Works and its competitors. For the Steel industry, the median Altman Z2-Score is 3.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chun Yu Works's current Altman Z2-Score is 3.11, which is near median its own 10-year median of 3.13. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chun Yu Works stock overvalued right now?
Based on GuruFocus' analysis, Chun Yu Works (TPE:2012) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$19.24, compared to a current price of NT$15.30 — trading 20.5% below its estimated fair value. The current Altman Z2-Score is 3.11, which is near median its 10-year median of 3.13 and 10.1% below the Steel industry median of 3.46. Chun Yu Works' overall GF Score™ is 65/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z2-Score calculated?
Altman Z2-Score is calculated from a company's financial statements. For Chun Yu Works (TPE:2012), the current Altman Z2-Score is 3.11 as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chun Yu Works (TPE:2012) Overvalued in 2026?
Based on GuruFocus' analysis, Chun Yu Works stock appears to be undervalued.
The current stock price of NT$15.30 is trading 20.5% below its estimated GF Value™ of NT$19.24.
GuruFocus considers Chun Yu Works to be Modestly Undervalued.
Key valuation signals for TPE:2012:
Altman Z2-Score: 3.11 (near median its 10-year median of 3.13)
GF Value™: NT$19.24 vs. price of NT$15.30 (20.5% below fair value)
Industry Position: 10.1% below the Steel median (#346 of 632)
No single metric tells the full story. See the TPE:2012 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chun Yu Works & Co Ltd manufactures steel products. The Company is engaged in the manufacture and sales of screws, nuts and wire rods, and other related products. The company's product portfolio comprises aerospace fasteners and medical equipment, automotive fasteners, cold drown wire and annealing wire, bolts, nuts, and self-tapping screws, and others. The group's reportable segment consists of the Screw segment; mainly engaged in the manufacture, process, and trade of screws and nuts. This segment generates the majority of the revenue. The machinery segment is engaged in the manufacture, assembly, and trade of machine tools and chemical machinery. The investment segment engages in general investment.
65GF Score
Get the complete analysis for TPE:2012
Altman Z2-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2012 has been successfully added to your 
