Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chun Yu WorksTPE:2012 -3.13%62 EV-to-EBIT is 25.68 as of Jul. 20, 2026, which is 80% above its 10-year median of 14.29. GuruFocus rates TPE:2012 with a GF Score™ of 62/100 and a GF Value™ of NT$19.09 (Modestly Undervalued). The stock has 10 warning signs investors should review. Among 493 Steel companies, Chun Yu Works ranks worse than 75.25% on this metric.
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
Chun Yu Works's Enterprise Value for the quarter that ended in Dec. 2025 was NT$9,183 Mil.
Chun Yu Works's EBIT for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$341 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chun Yu Works EV-to-EBIT Related Terms
Chun Yu Works EV-to-EBIT Historical Data
* Premium members only.
The historical data trend for Chun Yu Works's EV-to-EBIT can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Chun Yu Works's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chun Yu Works EV-to-EBIT vs Steel Industry
For the Steel industry and Basic Materials sector, Chun Yu Works's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where Chun Yu Works's EV-to-EBIT falls into.
Chun Yu Works's current Enterprise Value is NT$8,765 Mil.
Chun Yu Works's EBIT for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$341 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chun Yu Works (TPE:2012) has a EV-to-EBIT of 25.68 as of Jul. 20, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Chun Yu Works and its competitors. This is 80% above median its historical median of 14.29. Over the past decade, Chun Yu Works' EV-to-EBIT has ranged from 8.81 to 29.50. According to the industry distribution chart, Chun Yu Works ranks #371 out of 493 companies in the Steel industry, placing it in the top 75.3%.
Is Chun Yu Works' EV-to-EBIT too high?
Chun Yu Works' current EV-to-EBIT of 25.68 is 80% above median its 10-year median of 14.29. Over the past 10 years, this metric has ranged from a low of 8.81 to a high of 29.50. The Steel industry median EV-to-EBIT is 13.12. Chun Yu Works' value of 25.68 is 95.7% above this industry median. Based on the distribution chart, Chun Yu Works ranks #371 out of 493 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Chun Yu Works has a GF Score™ of 62/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chun Yu Works' EV-to-EBIT compare to NUE and STLD?
According to the Steel industry distribution chart, Chun Yu Works ranks #371 out of 493 companies for EV-to-EBIT. This places Chun Yu Works in the lower half of its industry. The industry median EV-to-EBIT is 13.12. Chun Yu Works' value of 25.68 is 95.7% above this benchmark. Historically, Chun Yu Works' own EV-to-EBIT has ranged from 8.81 to 29.50 over the past decade. While the company's 10-year median is 14.29 vs. the industry median of 13.12, Chun Yu Works has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for a Steel company?
The median EV-to-EBIT among Steel companies is 13.12, based on 493 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chun Yu Works's current EV-to-EBIT of 25.68 is 95.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Chun Yu Works and its competitors. For the Steel industry, the median EV-to-EBIT is 13.12 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chun Yu Works's current EV-to-EBIT is 25.68, which is 80% above median its own 10-year median of 14.29. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chun Yu Works stock overvalued right now?
Based on GuruFocus' analysis, Chun Yu Works (TPE:2012) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$19.09, compared to a current price of NT$15.45 — trading 19.1% below its estimated fair value. The current EV-to-EBIT is 25.68, which is 80% above median its 10-year median of 14.29 and 95.7% above the Steel industry median of 13.12. Chun Yu Works' overall GF Score™ is 62/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For Chun Yu Works (TPE:2012), the current EV-to-EBIT is 25.68 as of Jul. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chun Yu Works (TPE:2012) Overvalued in 2026?
Based on GuruFocus' analysis, Chun Yu Works stock appears to be undervalued.
The current stock price of NT$15.45 is trading 19.1% below its estimated GF Value™ of NT$19.09.
GuruFocus considers Chun Yu Works to be Modestly Undervalued.
Key valuation signals for TPE:2012:
EV-to-EBIT: 25.68 (80% above median its 10-year median of 14.29)
GF Value™: NT$19.09 vs. price of NT$15.45 (19.1% below fair value)
Industry Position: 95.7% above the Steel median (#371 of 493)
No single metric tells the full story. See the TPE:2012 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chun Yu Works & Co Ltd manufactures steel products. The Company is engaged in the manufacture and sales of screws, nuts and wire rods, and other related products. The company's product portfolio comprises aerospace fasteners and medical equipment, automotive fasteners, cold drown wire and annealing wire, bolts, nuts, and self-tapping screws, and others. The group's reportable segment consists of the Screw segment; mainly engaged in the manufacture, process, and trade of screws and nuts. This segment generates the majority of the revenue. The machinery segment is engaged in the manufacture, assembly, and trade of machine tools and chemical machinery. The investment segment engages in general investment.
62GF Score
Get the complete analysis for TPE:2012
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2012 has been successfully added to your 
