Return-on-Tangible-Asset is calculated as Net Income divided by its average total tangible assets. Total tangible assets equals to Total Assets minus Intangible Assets. Chun Yu Works's annualizedNet Income for the quarter that ended in Dec. 2025 was NT$-58 Mil. Chun Yu Works's average total tangible assets for the quarter that ended in Dec. 2025 was NT$11,412 Mil. Therefore, Chun Yu Works's annualized Return-on-Tangible-Asset for the quarter that ended in Dec. 2025 was -0.51%.
The historical rank and industry rank for Chun Yu Works's Return-on-Tangible-Asset or its related term are showing as below:
TPE:2012'
s Return-on-Tangible-Asset Range Over the Past 10 Years
Min: 0.47 Med: 2.33 Max: 6.36
Current: 0.47
During the past 13 years, Chun Yu Works's highest Return-on-Tangible-Asset was 6.36%. The lowest was 0.47%. And the median was 2.33%.
TPE:2012's Return-on-Tangible-Asset is ranked worse than 62.4% of 633
companies
in the Steel industry
Industry Median: 1.97
vs TPE:2012: 0.47
Chun Yu Works (TPE:2012) Return-on-Tangible-Asset Explanation
Return-on-Tangible-Asset measures the rate of return on the average total tangible assets (total assets minus intangible assets). Tangible means physical in nature. Intangible Assets are assets that are not physical in nature, and typically "derive their value from legal or intellectual rights." Return-on-Tangible-Asset measures a firm's efficiency at generating profits from its tangible assets. It shows how well a company uses what it has to generate earnings. Return-on-Tangible-Assets can vary drastically across industries. Therefore, Return-on-Tangible-Asset should not be used to compare companies in different industries.
Be Aware
Like ROE and ROA, Return-on-Tangible-Asset is calculated with only 12 months data. Fluctuations in the companys earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. Return-on-Tangible-Asset can be affected by events such as stock buyback or issuance, and by a companys tax rate and its interest payment. Return-on-Tangible-Asset may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high Return-on-Tangible-Asset may indicate vulnerability in the durability of the competitive advantage.
Chun Yu Works Return-on-Tangible-Asset Related Terms
Chun Yu Works Return-on-Tangible-Asset Historical Data
* Premium members only.
The historical data trend for Chun Yu Works's Return-on-Tangible-Asset can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2012 vs NUE, STLD, RS: Return-on-Tangible-Asset Comparison
For the Steel subindustry, Chun Yu Works's Return-on-Tangible-Asset, along with its competitors' market caps and Return-on-Tangible-Asset data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chun Yu Works Return-on-Tangible-Asset vs Steel Industry
For the Steel industry and Basic Materials sector, Chun Yu Works's Return-on-Tangible-Asset distribution charts can be found below:
* The bar in red indicates where Chun Yu Works's Return-on-Tangible-Asset falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Return-on-Tangible-Asset, the net income of the last fiscal year and the average total tangible assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Dec. 2025) net income data.
What does a Return-on-Tangible-Asset of -0.51% mean?
Chun Yu Works (TPE:2012) has a Return-on-Tangible-Asset of -0.51% as of Dec. 2025. Return on tangible assets is the ratio of current-period net income to average two-period tangible assets. View historical data on Chun Yu Works and its competitors. Over the past decade, Chun Yu Works' Return-on-Tangible-Asset has ranged from 0.47 to 6.36. According to the industry distribution chart, Chun Yu Works ranks #395 out of 633 companies in the Steel industry, placing it in the top 62.4%.
Is Chun Yu Works' Return-on-Tangible-Asset too high?
Chun Yu Works' current Return-on-Tangible-Asset is -0.51%. Over the past 10 years, this metric has ranged from a low of 0.47 to a high of 6.36. Based on the distribution chart, Chun Yu Works ranks #395 out of 633 companies in the Steel industry, which is below the industry midpoint. Overall, Chun Yu Works has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chun Yu Works' Return-on-Tangible-Asset compare to NUE and STLD?
According to the Steel industry distribution chart, Chun Yu Works ranks #395 out of 633 companies for Return-on-Tangible-Asset. This places Chun Yu Works in the lower half of its industry. The industry median Return-on-Tangible-Asset is 1.97. Historically, Chun Yu Works' own Return-on-Tangible-Asset has ranged from 0.47 to 6.36 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Return-on-Tangible-Asset for a Steel company?
The median Return-on-Tangible-Asset among Steel companies is 1.97, based on 633 companies in the industry. Companies in the top quartile (top 25%) have a Return-on-Tangible-Asset significantly above this median, while those in the bottom quartile fall well below. However, Return-on-Tangible-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Return-on-Tangible-Asset mean?
A high Return-on-Tangible-Asset can signal that a stock is expensive relative to its fundamentals. Return on tangible assets is the ratio of current-period net income to average two-period tangible assets. View historical data on Chun Yu Works and its competitors. For the Steel industry, the median Return-on-Tangible-Asset is 1.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chun Yu Works's current Return-on-Tangible-Asset is -0.51%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chun Yu Works stock overvalued right now?
Based on GuruFocus' analysis, Chun Yu Works (TPE:2012) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$19.16, compared to a current price of NT$15.70 — trading 18.1% below its estimated fair value. The current Return-on-Tangible-Asset is -0.51%. Chun Yu Works' overall GF Score™ is 61/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Return-on-Tangible-Asset calculated?
Return-on-Tangible-Asset is calculated from a company's financial statements. For Chun Yu Works (TPE:2012), the current Return-on-Tangible-Asset is -0.51% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chun Yu Works (TPE:2012) Overvalued in 2026?
Based on GuruFocus' analysis, Chun Yu Works stock appears to be undervalued.
The current stock price of NT$15.70 is trading 18.1% below its estimated GF Value™ of NT$19.16.
GuruFocus considers Chun Yu Works to be Modestly Undervalued.
Key valuation signals for TPE:2012:
Return-on-Tangible-Asset: -0.51%
GF Value™: NT$19.16 vs. price of NT$15.70 (18.1% below fair value)
No single metric tells the full story. See the TPE:2012 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chun Yu Works & Co Ltd manufactures steel products. The Company is engaged in the manufacture and sales of screws, nuts and wire rods, and other related products. The company's product portfolio comprises aerospace fasteners and medical equipment, automotive fasteners, cold drown wire and annealing wire, bolts, nuts, and self-tapping screws, and others. The group's reportable segment consists of the Screw segment; mainly engaged in the manufacture, process, and trade of screws and nuts. This segment generates the majority of the revenue. The machinery segment is engaged in the manufacture, assembly, and trade of machine tools and chemical machinery. The investment segment engages in general investment.
61GF Score
Get the complete analysis for TPE:2012
Return-on-Tangible-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2012 has been successfully added to your 
