Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Drilling Tools International's EBITDA per Share for the
three
months ended in Jun. 2026 was $0.18.
Its EBITDA per Share for the trailing twelve months (TTM) ended in Jun. 2026 was $0.81.
During the past 12 months, the average EBITDA per Share Growth Rate of Drilling Tools International was 7.10% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the EBITDA per Share growth rate using EBITDA per Share data.
The historical rank and industry rank for Drilling Tools International's EBITDA per Share or its related term are showing as below:
DTI's 3-Year EBITDA Growth Rate is not ranked *
in the Oil & Gas industry.
Industry Median: 0.7 * Ranked among companies with meaningful 3-Year EBITDA Growth Rate only.
During the past 12 months, the average EBITDA Growth Rate of Drilling Tools International was 8.60% per year.
During the past 3 years, the average EBITDA Growth Rate was -13.10% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the EBITDA Growth Rate using EBITDA data.
During the past 5 years, the highest 3-Year average EBITDA Growth Rate of Drilling Tools International was 6.70% per year. The lowest was -13.10% per year. And the median was -3.20% per year.
Drilling Tools International (NAS:DTI) EBITDA per Share Explanation
EBITDA is a cash flow measure that ignores changes in working capital. EBITDA minus Depreciation, and Amortization (DA) equals EBIT. EBIT is profit before interest and taxes. Of course, Interest and taxes need to be paid.
While depreciation and amortization expenses do not need to be paid in cash, assets - especially tangible assets - do need to be replaced over time. EBITDA is not a measure of profit in any sense. EBITDA is a measure of cash generation by a business where the uses of that cash may be more or less discretionary depending on the nature of the business.
The EBITDA of a TV station is largely discretionary. Owners may use much of the EBITDA generated by a TV station as they see fit. The EBITDA of a railroad is largely non-discretionary. Owners must use much of the EBITDA generated by a railroad to replace the physical assets of the railroad or the business will literally fall apart over time.
EBITDA can be thought of as the cash a business generates that is available to:
Add more inventory
Add more receivables
Replace property, plant, and equipment
Add more property, plant, and equipment
Pay interest
Pay taxes
And finally: pay owners
EBITDA is widely used in financial analysis because Depreciation and Amortization are not present day cash expenses. Depreciation and amortization are the spreading out of the costs of assets over the time in which those assets provide benefits. Today's depreciation and amortization expenses relate to assets bought in the past. The assets being expensed may or may not need to be replaced in the future. And the cost to replace the assets may be more or less than it was in the past. For this reason, the depreciation and amortization expenses a company records in the present year may have no relationship to the actual cash costs needed to maintain its assets in future years.
A company's depreciation expense depends on both its expectations about the assets it owns and its choice of accounting methods. Two companies owning identical assets may have different depreciation expenses because they have different expectations about the useful lives of those assets and because they make different accounting choices.
Analysts use EBITDA to remove this element of personal choice from a company's accounting statements. The use of EBITDA is an attempt to make the results of different companies more comparable and uniform.
Be Aware
Although depreciation is not a cash cost, it is a real business cost because the company has to pay for the fixed assets when they purchase them. Both Warren Buffett and Charlie Munger hate the idea of EBITDA because in this calculation, depreciation is not counted as an expense.
EBITDA over Revenue is a good metric for comparing the operating efficiencies between companies because EBITDA is less vulnerable to companies' accounting choices. For this reason, EBITDA is used in ranking the Predictability of Companies.
Drilling Tools International EBITDA per Share Related Terms
Drilling Tools International EBITDA per Share Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Drilling Tools International EBITDA per Share Chart
Drilling Tools International EBITDA per Share Calculation
EBITDA per Share is the amount of Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) per outstanding share of the company's stock.
Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) is what the company earns before it expenses interest, taxes, depreciation and amortization.
EBITDA per Share for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was $0.81
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Drilling Tools International (DTI) has a EBITDA per Share of $0.81 as of Jun. 2026. EBITDA per share is the per-share amount of earnings before interest, taxes, depreciation and amortization. View historical data on Drilling Tools International and its competitors. According to the industry distribution chart, Drilling Tools International ranks #999999 out of 823 companies in the Oil & Gas industry.
Is Drilling Tools International's EBITDA per Share too high?
Drilling Tools International's current EBITDA per Share is $0.81. The Oil & Gas industry median EBITDA per Share is 0.70. Drilling Tools International's value of $0.81 is 15.7% above this industry median. Based on the distribution chart, Drilling Tools International ranks #999999 out of 823 companies in the Oil & Gas industry, which is in the bottom quartile relative to peers. Overall, Drilling Tools International has a GF Score™ of 63/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Drilling Tools International's EBITDA per Share compare to LSE and DWSN?
According to the Oil & Gas industry distribution chart, Drilling Tools International ranks #999999 out of 823 companies for EBITDA per Share. This places Drilling Tools International in the lower half of its industry. The industry median EBITDA per Share is 0.70. Drilling Tools International's value of $0.81 is 15.7% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA per Share for an Oil & Gas company?
The median EBITDA per Share among Oil & Gas companies is 0.70, based on 823 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA per Share significantly above this median, while those in the bottom quartile fall well below. However, EBITDA per Share should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Drilling Tools International's current EBITDA per Share of $0.81 is 15.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA per Share mean?
A high EBITDA per Share can signal that a stock is expensive relative to its fundamentals. EBITDA per share is the per-share amount of earnings before interest, taxes, depreciation and amortization. View historical data on Drilling Tools International and its competitors. For the Oil & Gas industry, the median EBITDA per Share is 0.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Drilling Tools International's current EBITDA per Share is $0.81. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Drilling Tools International stock overvalued right now?
Based on GuruFocus' analysis, Drilling Tools International (DTI) is currently considered Fairly Valued. The stock's GF Value™ is $2.69, compared to a current price of $2.58 — trading 4.1% below its estimated fair value. The current EBITDA per Share is $0.81 and 15.7% above the Oil & Gas industry median of 0.70. Drilling Tools International's overall GF Score™ is 63/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA per Share calculated?
EBITDA per Share is calculated from a company's financial statements. For Drilling Tools International (DTI), the current EBITDA per Share is $0.81 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Drilling Tools International (DTI) Overvalued in 2026?
Based on GuruFocus' analysis, Drilling Tools International stock appears to be undervalued.
The current stock price of $2.58 is trading 4.1% below its estimated GF Value™ of $2.69.
GuruFocus considers Drilling Tools International to be Fairly Valued.
Key valuation signals for DTI:
EBITDA per Share: $0.81
GF Value™: $2.69 vs. price of $2.58 (4.1% below fair value)
Industry Position: 15.7% above the Oil & Gas median (#999999 of 823)
No single metric tells the full story. See the DTI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Drilling Tools International Corp is an oilfield services company that designs, engineers, and manufactures rental-focused tools used in onshore and offshore horizontal and directional drilling operations, as well as solutions across the well life cycle. It operates through two geographic segments: Western Hemisphere and Eastern Hemisphere. The Western Hemisphere, which generates the majority of revenue, provides downhole drilling tools and rental services for onshore and offshore operations across North America and Latin America, supported by service centers in the U.S. and Canada. The Eastern Hemisphere covers Europe, the Middle East, and Asia-Pacific, where the company offers drilling and well lifecycle solutions through international service centers across the EMEA and APAC regions.
63GF Score
Get the complete analysis for DTI
EBITDA per Share is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DTI has been successfully added to your 
