Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Drilling Tools InternationalDTI -0.77%63 Altman Z-Score is 1.33 as of Sep. 09, 2026, which is 23% below its 10-year median of 1.73. GuruFocus rates DTI with a GF Score™ of 63/100 and a GF Value™ of $2.69 (Fairly Valued). The stock has 7 warning signs investors should review. Among 905 Oil & Gas companies, Drilling Tools International ranks worse than 64.97% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 1.34 is in distress zone. This implies bankruptcy possibility in the next two years.
Drilling Tools International has a Altman Z-Score of 1.33, indicating it is in Distress Zones. This implies bankrupcy possibility in the next two years.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Drilling Tools International's Altman Z-Score or its related term are showing as below:
DTI'
s Altman Z-Score Range Over the Past 10 Years
Min: 1.21 Med: 1.73 Max: 5.46
Current: 1.34
During the past 5 years, Drilling Tools International's highest Altman Z-Score was 5.46. The lowest was 1.21. And the median was 1.73.
Drilling Tools International (NAS:DTI) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Oil & Gas Equipment & Services subindustry, Drilling Tools International's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Drilling Tools International Altman Z-Score vs Oil & Gas Industry
For the Oil & Gas industry and Energy sector, Drilling Tools International's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Drilling Tools International's Altman Z-Score falls into.
Drilling Tools International Altman Z-Score Calculation
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Drilling Tools International (DTI) has a Altman Z-Score of 1.33 as of Sep. 09, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Drilling Tools International and its competitors. This is 23% below median its historical median of 1.73. Over the past decade, Drilling Tools International's Altman Z-Score has ranged from 1.21 to 5.46. According to the industry distribution chart, Drilling Tools International ranks #588 out of 905 companies in the Oil & Gas industry, placing it in the top 65%.
Is Drilling Tools International's Altman Z-Score too high?
Drilling Tools International's current Altman Z-Score of 1.33 is 23% below median its 10-year median of 1.73. Over the past 10 years, this metric has ranged from a low of 1.21 to a high of 5.46. The Oil & Gas industry median Altman Z-Score is 2.00. Drilling Tools International's value of 1.33 is 33.5% below this industry median. Based on the distribution chart, Drilling Tools International ranks #588 out of 905 companies in the Oil & Gas industry, which is below the industry midpoint. Overall, Drilling Tools International has a GF Score™ of 63/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Drilling Tools International's Altman Z-Score compare to LSE and DWSN?
According to the Oil & Gas industry distribution chart, Drilling Tools International ranks #588 out of 905 companies for Altman Z-Score. This places Drilling Tools International in the lower half of its industry. The industry median Altman Z-Score is 2.00. Drilling Tools International's value of 1.33 is 33.5% below this benchmark. Historically, Drilling Tools International's own Altman Z-Score has ranged from 1.21 to 5.46 over the past decade. While the company's 10-year median is 1.73 vs. the industry median of 2.00, Drilling Tools International has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Oil & Gas company?
The median Altman Z-Score among Oil & Gas companies is 2.00, based on 905 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Drilling Tools International's current Altman Z-Score of 1.33 is 33.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Drilling Tools International and its competitors. For the Oil & Gas industry, the median Altman Z-Score is 2.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Drilling Tools International's current Altman Z-Score is 1.33, which is 23% below median its own 10-year median of 1.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Drilling Tools International stock overvalued right now?
Based on GuruFocus' analysis, Drilling Tools International (DTI) is currently considered Fairly Valued. The stock's GF Value™ is $2.69, compared to a current price of $2.58 — trading 4.3% below its estimated fair value. The current Altman Z-Score is 1.33, which is 23% below median its 10-year median of 1.73 and 33.5% below the Oil & Gas industry median of 2.00. Drilling Tools International's overall GF Score™ is 63/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Drilling Tools International (DTI), the current Altman Z-Score is 1.33 as of Sep. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Drilling Tools International (DTI) Overvalued in 2026?
Based on GuruFocus' analysis, Drilling Tools International stock appears to be undervalued.
The current stock price of $2.58 is trading 4.3% below its estimated GF Value™ of $2.69.
GuruFocus considers Drilling Tools International to be Fairly Valued.
Key valuation signals for DTI:
Altman Z-Score: 1.33 (23% below median its 10-year median of 1.73)
GF Value™: $2.69 vs. price of $2.58 (4.3% below fair value)
Industry Position: 33.5% below the Oil & Gas median (#588 of 905)
No single metric tells the full story. See the DTI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Drilling Tools International Corp is an oilfield services company that designs, engineers, and manufactures rental-focused tools used in onshore and offshore horizontal and directional drilling operations, as well as solutions across the well life cycle. It operates through two geographic segments: Western Hemisphere and Eastern Hemisphere. The Western Hemisphere, which generates the majority of revenue, provides downhole drilling tools and rental services for onshore and offshore operations across North America and Latin America, supported by service centers in the U.S. and Canada. The Eastern Hemisphere covers Europe, the Middle East, and Asia-Pacific, where the company offers drilling and well lifecycle solutions through international service centers across the EMEA and APAC regions.
63GF Score
Get the complete analysis for DTI
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DTI has been successfully added to your 
