Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Drilling Tools InternationalDTI -0.77%63 WACC % is 3.4% as of Sep. 09, 2026, which is 41% below its 10-year median of 5.74. GuruFocus rates DTI with a GF Score™ of 63/100 and a GF Value™ of $2.69 (Fairly Valued). The stock has 7 warning signs investors should review. Among 1,042 Oil & Gas companies, Drilling Tools International ranks better than 83.3% on this metric.
As of today (2026-09-09), Drilling Tools International's weighted average cost of capital is 3.4%%. Drilling Tools International's ROIC % is 1.69% (calculated using TTM income statement data).
Drilling Tools International earns returns that do not match up to its cost of capital. It will destroy value as it grows.
For a comprehensive WACC calculation, please access the WACC Calculator.
Drilling Tools International (NAS:DTI) WACC % Explanation
Because it costs money to raise capital. A firm that generates higher ROIC % than it costs the company to raise the capital needed for that investment is earning excess returns. A firm that expects to continue generating positive excess returns on new investments in the future will see its value increase as growth increases, whereas a firm that earns returns that do not match up to its cost of capital will destroy value as it grows.
As of today, Drilling Tools International's weighted average cost of capital is 3.4%%. Drilling Tools International's ROIC % is 1.69% (calculated using TTM income statement data).
Drilling Tools International earns returns that do not match up to its cost of capital. It will destroy value as it grows.
Be Aware
1. GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding latest one-year quarterly average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together.
For companies that report quarterly, GuruFocus combines all of the most recent year's quarterly debt data from the beginning of the year to the year-end and calculates the average.
For companies that report semi-annually, GuruFocus combines all of the most recent year's semi-annual debt data from the start of the year to the year-end and calculates the average.
For companies that report annually, GuruFocus combines the beginning and ending annual debt data from the most recent year and then calculates the average.
2. The WACC formula discussed above does not include Preferred Stock. Please adjust if preferred stock is considered.
3. (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
4. GuruFocus uses the latest TTM Interest Expense divided by the latest one-year quarterly average debt to get the simplified cost of debt.
Related Terms
Drilling Tools International WACC % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Oil & Gas Equipment & Services subindustry, Drilling Tools International's WACC %, along with its competitors' market caps and WACC % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Drilling Tools International WACC % vs Oil & Gas Industry
For the Oil & Gas industry and Energy sector, Drilling Tools International's WACC % distribution charts can be found below:
* The bar in red indicates where Drilling Tools International's WACC % falls into.
The weighted average cost of capital (WACC) is the rate that a company is expected to pay on average to all its security holders to finance its assets. The WACC is commonly referred to as the firm's cost of capital. Generally speaking, a company's assets are financed by debt and equity. WACC is the average of the costs of these sources of financing, each of which is weighted by its respective use in the given situation. By taking a weighted average, we can see how much interest the company has to pay for every dollar it finances.
WACC
=
E
/
(E + D)
*
Cost of Equity
+
D
/
(E + D)
*
Cost of Debt
*
(1 - Tax Rate)
1. Weights:
Generally speaking, a company's assets are financed by debt and equity. We need to calculate the weight of equity and the weight of debt.
The market value of equity (E) is also called "Market Cap". As of today, Drilling Tools International's market capitalization (E) is $90.852 Mil.
The market value of debt is typically difficult to calculate, therefore, GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding the latest one-year quarterly average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together. As of Jun. 2026, Drilling Tools International's latest one-year quarterly average Book Value of Debt (D) is $77.133 Mil.
a) weight of equity = E / (E + D) = 90.852 / (90.852 + 77.133) = 0.5408
b) weight of debt = D / (E + D) = 77.133 / (90.852 + 77.133) = 0.4592
2. Cost of Equity:
GuruFocus uses Capital Asset Pricing Model (CAPM) to calculate the required rate of return. The formula is:
Cost of Equity = Risk-Free Rate of Return + Beta of Asset * (Expected Return of the Market - Risk-Free Rate of Return)
a) GuruFocus uses 10-Year Treasury Constant Maturity Rate as the risk-free rate. It is updated daily. The current risk-free rate is 4.843%. Please go to Economic Indicators page for more information. Please note that we use the 10-Year Treasury Constant Maturity Rate of the country/region where the company is headquartered. If the data for that country/region is not available, then we will use the 10-Year Treasury Constant Maturity Rate of the United States as default.
b) Beta is the sensitivity of the expected excess asset returns to the expected excess market returns. Drilling Tools International's beta is -0.5110.
c) (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
Cost of Equity = 4.843% + -0.5110 * 6% = 1.777%
3. Cost of Debt:
GuruFocus uses latest TTM Interest Expense divided by the latest one-year quarterly average debt to get the simplified cost of debt.
As of Jun. 2026, Drilling Tools International's interest expense (positive number) was $4.532 Mil. Its total Book Value of Debt (D) is $77.133 Mil.
Cost of Debt = 4.532 / 77.133 = 5.8756%.
4. Multiply by one minus TTM Tax Rate:
GuruFocus uses the most recent TTM Tax Expense divided by the most recent TTM Pre-Tax Income to calculate the tax rate. The calculated TTM tax rate is limited to between 0% and 100%. If the calculated tax rate is higher than 100%, it is set to 100%. If the calculated tax rate is less than 0%, it is set to 0%.
The latest calculated TTM Tax Rate = -0.315 / -3.332 = 9.45%.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Drilling Tools International (DTI) has a WACC % of 3.4% as of Sep. 09, 2026. The weighted average cost of capital (WACC) is the average rate a company pays to finance assets. View historical data on Drilling Tools International and its competitors. This is 41% below median its historical median of 5.74. Over the past decade, Drilling Tools International's WACC % has ranged from 1.64 to 9.15. According to the industry distribution chart, Drilling Tools International ranks #174 out of 1042 companies in the Oil & Gas industry, placing it in the top 16.7%.
Is Drilling Tools International's WACC % too high?
Drilling Tools International's current WACC % of 3.4% is 41% below median its 10-year median of 5.74. Over the past 10 years, this metric has ranged from a low of 1.64 to a high of 9.15. The Oil & Gas industry median WACC % is 7.48. Drilling Tools International's value of 3.4% is 54.5% below this industry median. Based on the distribution chart, Drilling Tools International ranks #174 out of 1042 companies in the Oil & Gas industry, which is in the top quartile — a strong position relative to peers. Overall, Drilling Tools International has a GF Score™ of 63/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Drilling Tools International's WACC % compare to LSE and DWSN?
According to the Oil & Gas industry distribution chart, Drilling Tools International ranks #174 out of 1042 companies for WACC %. This places Drilling Tools International in the top 17% of its industry — outperforming the majority of peers. The industry median WACC % is 7.48. Drilling Tools International's value of 3.4% is 54.5% below this benchmark. Historically, Drilling Tools International's own WACC % has ranged from 1.64 to 9.15 over the past decade. While the company's 10-year median is 5.74 vs. the industry median of 7.48, Drilling Tools International has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good WACC % for an Oil & Gas company?
The median WACC % among Oil & Gas companies is 7.48, based on 1,042 companies in the industry. Companies in the top quartile (top 25%) have a WACC % significantly above this median, while those in the bottom quartile fall well below. However, WACC % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Drilling Tools International's current WACC % of 3.4% is 54.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high WACC % mean?
A high WACC % can signal that a stock is expensive relative to its fundamentals. The weighted average cost of capital (WACC) is the average rate a company pays to finance assets. View historical data on Drilling Tools International and its competitors. For the Oil & Gas industry, the median WACC % is 7.48 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Drilling Tools International's current WACC % is 3.4%, which is 41% below median its own 10-year median of 5.74. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Drilling Tools International stock overvalued right now?
Based on GuruFocus' analysis, Drilling Tools International (DTI) is currently considered Fairly Valued. The stock's GF Value™ is $2.69, compared to a current price of $2.58 — trading 4.3% below its estimated fair value. The current WACC % is 3.4%, which is 41% below median its 10-year median of 5.74 and 54.5% below the Oil & Gas industry median of 7.48. Drilling Tools International's overall GF Score™ is 63/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is WACC % calculated?
WACC % is calculated from a company's financial statements. For Drilling Tools International (DTI), the current WACC % is 3.4% as of Sep. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Drilling Tools International (DTI) Overvalued in 2026?
Based on GuruFocus' analysis, Drilling Tools International stock appears to be undervalued.
The current stock price of $2.58 is trading 4.3% below its estimated GF Value™ of $2.69.
GuruFocus considers Drilling Tools International to be Fairly Valued.
Key valuation signals for DTI:
WACC %: 3.4% (41% below median its 10-year median of 5.74)
GF Value™: $2.69 vs. price of $2.58 (4.3% below fair value)
Industry Position: 54.5% below the Oil & Gas median (#174 of 1042)
No single metric tells the full story. See the DTI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Drilling Tools International Corp is an oilfield services company that designs, engineers, and manufactures rental-focused tools used in onshore and offshore horizontal and directional drilling operations, as well as solutions across the well life cycle. It operates through two geographic segments: Western Hemisphere and Eastern Hemisphere. The Western Hemisphere, which generates the majority of revenue, provides downhole drilling tools and rental services for onshore and offshore operations across North America and Latin America, supported by service centers in the U.S. and Canada. The Eastern Hemisphere covers Europe, the Middle East, and Asia-Pacific, where the company offers drilling and well lifecycle solutions through international service centers across the EMEA and APAC regions.
63GF Score
Get the complete analysis for DTI
WACC % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DTI has been successfully added to your 
