The historical rank and industry rank for I-Chiun Precision Industry Co's EV-to-FCF or its related term are showing as below:
TPE:2486'
s EV-to-FCF Range Over the Past 10 Years
Min: -288.41 Med: -8.84 Max: 118.47
Current: -46.46
During the past 13 years, the highest EV-to-FCF of I-Chiun Precision Industry Co was 118.47. The lowest was -288.41. And the median was -8.84.
TPE:2486's EV-to-FCF is ranked worse than 100% of 1331
companies
in the Hardware industry
Industry Median: 23.55
vs TPE:2486: -46.46
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
I-Chiun Precision Industry Co (TPE:2486) EV-to-FCF Explanation
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
I-Chiun Precision Industry Co's PE Ratio (TTM) for today is calculated as:
I-Chiun Precision Industry Co's share price for today is NT$259.00.
I-Chiun Precision Industry Co's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$0.220.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enterprise Value is used because it is a more complete measure in reflecting how much an investor pays when buying a company. Free Cash Flow is an important financial metric because it represents the actual amount of cash at a company's disposal. Companies with a low EV-to-FCF ratio, combined with a strong balance sheet are generally considered as undervalued.
I-Chiun Precision Industry Co EV-to-FCF Related Terms
I-Chiun Precision Industry Co EV-to-FCF Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, I-Chiun Precision Industry Co's EV-to-FCF, along with its competitors' market caps and EV-to-FCF data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
I-Chiun Precision Industry Co EV-to-FCF vs Hardware Industry
For the Hardware industry and Technology sector, I-Chiun Precision Industry Co's EV-to-FCF distribution charts can be found below:
* The bar in red indicates where I-Chiun Precision Industry Co's EV-to-FCF falls into.
I-Chiun Precision Industry Co's current Enterprise Value is NT$64,476 Mil.
I-Chiun Precision Industry Co's Free Cash Flow for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$-1,338 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
I-Chiun Precision Industry Co (TPE:2486) has a EV-to-FCF of -48.20 as of Jul. 11, 2026. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on I-Chiun Precision Industry Co and its competitors. According to the industry distribution chart, I-Chiun Precision Industry Co ranks #999999 out of 1331 companies in the Hardware industry.
Is I-Chiun Precision Industry Co's EV-to-FCF too high?
I-Chiun Precision Industry Co's current EV-to-FCF is -48.20. Based on the distribution chart, I-Chiun Precision Industry Co ranks #999999 out of 1331 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, I-Chiun Precision Industry Co has a GF Score™ of 51/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does I-Chiun Precision Industry Co's EV-to-FCF compare to APH and GLW?
According to the Hardware industry distribution chart, I-Chiun Precision Industry Co ranks #999999 out of 1331 companies for EV-to-FCF. This places I-Chiun Precision Industry Co in the lower half of its industry. The industry median EV-to-FCF is 23.55. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-FCF for a Hardware company?
The median EV-to-FCF among Hardware companies is 23.55, based on 1,331 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-FCF significantly above this median, while those in the bottom quartile fall well below. However, EV-to-FCF should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-FCF mean?
A high EV-to-FCF can signal that a stock is expensive relative to its fundamentals. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on I-Chiun Precision Industry Co and its competitors. For the Hardware industry, the median EV-to-FCF is 23.55 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. I-Chiun Precision Industry Co's current EV-to-FCF is -48.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is I-Chiun Precision Industry Co stock overvalued right now?
Based on GuruFocus' analysis, I-Chiun Precision Industry Co (TPE:2486) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$82.54, compared to a current price of NT$259.00 — trading 213.8% above its estimated fair value. The current EV-to-FCF is -48.20. I-Chiun Precision Industry Co's overall GF Score™ is 51/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-FCF calculated?
EV-to-FCF is calculated from a company's financial statements. For I-Chiun Precision Industry Co (TPE:2486), the current EV-to-FCF is -48.20 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is I-Chiun Precision Industry Co (TPE:2486) Overvalued in 2026?
Based on GuruFocus' analysis, I-Chiun Precision Industry Co stock appears to be overvalued.
The current stock price of NT$259.00 is trading 213.8% above its estimated GF Value™ of NT$82.54.
GuruFocus considers I-Chiun Precision Industry Co to be Significantly Overvalued.
Key valuation signals for TPE:2486:
EV-to-FCF: -48.20
GF Value™: NT$82.54 vs. price of NT$259.00 (213.8% above fair value)
No single metric tells the full story. See the TPE:2486 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
I-Chiun Precision Industry Co Business Description
I-Chiun Precision Industry Co Ltd is mainly engaged in the manufacturing, processing, and trading of machinery and parts, electronic parts, parts for appliances, semiconductor LED lead frames, precision molds, etc., as well as relevant import and export trade, and real estate leasing business. The Geographical presence of the company in China, Taiwan, and Other countries. The majority of its revenue is generated from China.
51GF Score
Get the complete analysis for TPE:2486
EV-to-FCF is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2486 has been successfully added to your 
