Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The historical rank and industry rank for Uni Abex Alloy Products's PB Ratio or its related term are showing as below:
BOM:504605'
s PB Ratio Range Over the Past 10 Years
Min: 1.37 Med: 2.19 Max: 6.55
Current: 2.3
During the past 13 years, Uni Abex Alloy Products's highest PB Ratio was 6.55. The lowest was 1.37. And the median was 2.19.
BOM:504605's PB Ratio is ranked worse than 81.18% of 611
companies
in the Steel industry
Industry Median: 0.96
vs BOM:504605: 2.30
During the past 12 months, Uni Abex Alloy Products's average Book Value Per Share Growth Rate was 192.80% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 71.90% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 43.60% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 23.20% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Uni Abex Alloy Products was 71.90% per year. The lowest was -16.50% per year. And the median was 17.45% per year.
Back to Basics: PB Ratio
Uni Abex Alloy Products (BOM:504605) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Uni Abex Alloy Products's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uni Abex Alloy Products PB Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Uni Abex Alloy Products's PB Ratio distribution charts can be found below:
* The bar in red indicates where Uni Abex Alloy Products's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Uni Abex Alloy Products (BOM:504605) has a PB Ratio of 2.30 as of Jul. 29, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Uni Abex Alloy Products and its competitors. This is near median its historical median of 2.19. Over the past decade, Uni Abex Alloy Products' PB Ratio has ranged from 1.37 to 6.55. According to the industry distribution chart, Uni Abex Alloy Products ranks #496 out of 611 companies in the Steel industry, placing it in the top 81.2%.
Is Uni Abex Alloy Products' PB Ratio too high?
Uni Abex Alloy Products' current PB Ratio of 2.30 is near median its 10-year median of 2.19. Over the past 10 years, this metric has ranged from a low of 1.37 to a high of 6.55. The Steel industry median PB Ratio is 0.96. Uni Abex Alloy Products' value of 2.30 is 139.6% above this industry median. Based on the distribution chart, Uni Abex Alloy Products ranks #496 out of 611 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Uni Abex Alloy Products has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uni Abex Alloy Products' PB Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Uni Abex Alloy Products ranks #496 out of 611 companies for PB Ratio. This places Uni Abex Alloy Products in the lower half of its industry. The industry median PB Ratio is 0.96. Uni Abex Alloy Products' value of 2.30 is 139.6% above this benchmark. Historically, Uni Abex Alloy Products' own PB Ratio has ranged from 1.37 to 6.55 over the past decade. While the company's 10-year median is 2.19 vs. the industry median of 0.96, Uni Abex Alloy Products has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Steel company?
The median PB Ratio among Steel companies is 0.96, based on 611 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Uni Abex Alloy Products's current PB Ratio of 2.30 is 139.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Uni Abex Alloy Products and its competitors. For the Steel industry, the median PB Ratio is 0.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uni Abex Alloy Products's current PB Ratio is 2.30, which is near median its own 10-year median of 2.19. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uni Abex Alloy Products stock overvalued right now?
Based on GuruFocus' analysis, Uni Abex Alloy Products (BOM:504605) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹3,587.58, compared to a current price of ₹4,825.00 — trading 34.5% above its estimated fair value. The current PB Ratio is 2.30, which is near median its 10-year median of 2.19 and 139.6% above the Steel industry median of 0.96. Uni Abex Alloy Products' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Uni Abex Alloy Products (BOM:504605), the current PB Ratio is 2.30 as of Jul. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uni Abex Alloy Products (BOM:504605) Overvalued in 2026?
Based on GuruFocus' analysis, Uni Abex Alloy Products stock appears to be overvalued.
The current stock price of ₹4,825.00 is trading 34.5% above its estimated GF Value™ of ₹3,587.58.
GuruFocus considers Uni Abex Alloy Products to be Significantly Overvalued.
Key valuation signals for BOM:504605:
PB Ratio: 2.30 (near median its 10-year median of 2.19)
GF Value™: ₹3,587.58 vs. price of ₹4,825.00 (34.5% above fair value)
Industry Position: 139.6% above the Steel median (#496 of 611)
No single metric tells the full story. See the BOM:504605 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uni Abex Alloy Products Ltd produces static, centrifugal castings and assemblies in heat and corrosion-resistant alloys and specializes in alloy steel castings for decanters and reformer tubes. It offers products such as reformer tubes, harp assemblies, air injection tubes, feed tubes, bowl cylinders, glendon coils, sink rolls, ring segments, radiant tubes, and cages, among others. The company's product is used by various industries such as refinery, petrochemical and fertilizer, sponge iron, iron and steel, galvanizing plants, metal gasket, furnace, decanter, and valve manufacturers. Geographically, the firm derives maximum revenue from its business within India, and also has exposure to other markets such as Sweden, Poland, Bangladesh, China, France, Germany, the USA, and others.
82GF Score
Get the complete analysis for BOM:504605
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504605 has been successfully added to your 
