Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sixxon Tech CoTPE:4569 -1.27%67 5-Year Yield-on-Cost % is 3.67 as of Jul. 26, 2026, which is 18% above its 10-year median of 3.10. GuruFocus rates TPE:4569 with a GF Score™ of 67/100 and a GF Value™ of NT$168.79 (Fairly Valued). The stock has 5 warning signs investors should review. Among 1,922 Industrial Products companies, Sixxon Tech Co ranks better than 68.78% on this metric.
Sixxon Tech Co's yield on cost for the quarter that ended in Dec. 2025 was 3.67.
The historical rank and industry rank for Sixxon Tech Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:4569'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.65 Med: 3.1 Max: 4.5
Current: 3.67
During the past 6 years, Sixxon Tech Co's highest Yield on Cost was 4.50. The lowest was 1.65. And the median was 3.10.
TPE:4569's 5-Year Yield-on-Cost % is ranked better than 68.78% of 1922
companies
in the Industrial Products industry
Industry Median: 1.94
vs TPE:4569: 3.67
Sixxon Tech Co (TPE:4569) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Sixxon Tech Co 5-Year Yield-on-Cost % Related Terms
TPE:4569 vs CRS, ATI, MLI: 5-Year Yield-on-Cost % Comparison
For the Metal Fabrication subindustry, Sixxon Tech Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sixxon Tech Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Sixxon Tech Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Sixxon Tech Co's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Sixxon Tech Co is calculated as
Sixxon Tech Co (TPE:4569) has a 5-Year Yield-on-Cost % of 3.67 as of Jul. 26, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Sixxon Tech Co and its competitors. This is 18% above median its historical median of 3.10. Over the past decade, Sixxon Tech Co's 5-Year Yield-on-Cost % has ranged from 1.65 to 4.50. According to the industry distribution chart, Sixxon Tech Co ranks #600 out of 1922 companies in the Industrial Products industry, placing it in the top 31.2%.
Is Sixxon Tech Co's 5-Year Yield-on-Cost % too high?
Sixxon Tech Co's current 5-Year Yield-on-Cost % of 3.67 is 18% above median its 10-year median of 3.10. Over the past 10 years, this metric has ranged from a low of 1.65 to a high of 4.50. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.94. Sixxon Tech Co's value of 3.67 is 89.2% above this industry median. Based on the distribution chart, Sixxon Tech Co ranks #600 out of 1922 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Sixxon Tech Co has a GF Score™ of 67/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sixxon Tech Co's 5-Year Yield-on-Cost % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Sixxon Tech Co ranks #600 out of 1922 companies for 5-Year Yield-on-Cost %. This puts Sixxon Tech Co in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 1.94. Sixxon Tech Co's value of 3.67 is 89.2% above this benchmark. Historically, Sixxon Tech Co's own 5-Year Yield-on-Cost % has ranged from 1.65 to 4.50 over the past decade. While the company's 10-year median is 3.10 vs. the industry median of 1.94, Sixxon Tech Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,922 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sixxon Tech Co's current 5-Year Yield-on-Cost % of 3.67 is 89.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Sixxon Tech Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sixxon Tech Co's current 5-Year Yield-on-Cost % is 3.67, which is 18% above median its own 10-year median of 3.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sixxon Tech Co stock overvalued right now?
Based on GuruFocus' analysis, Sixxon Tech Co (TPE:4569) is currently considered Fairly Valued. The stock's GF Value™ is NT$168.79, compared to a current price of NT$155.50 — trading 7.9% below its estimated fair value. The current 5-Year Yield-on-Cost % is 3.67, which is 18% above median its 10-year median of 3.10 and 89.2% above the Industrial Products industry median of 1.94. Sixxon Tech Co's overall GF Score™ is 67/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Sixxon Tech Co (TPE:4569), the current 5-Year Yield-on-Cost % is 3.67 as of Jul. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sixxon Tech Co (TPE:4569) Overvalued in 2026?
Based on GuruFocus' analysis, Sixxon Tech Co stock appears to be undervalued.
The current stock price of NT$155.50 is trading 7.9% below its estimated GF Value™ of NT$168.79.
GuruFocus considers Sixxon Tech Co to be Fairly Valued.
Key valuation signals for TPE:4569:
5-Year Yield-on-Cost %: 3.67 (18% above median its 10-year median of 3.10)
GF Value™: NT$168.79 vs. price of NT$155.50 (7.9% below fair value)
Industry Position: 89.2% above the Industrial Products median (#600 of 1922)
No single metric tells the full story. See the TPE:4569 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sixxon Tech Co Ltd is a product solutions company providing comprehensive design, manufacturing, supply chain, and product management services. Its main business is the design, manufacturing, processing, and sales of precision metal parts and components of automotive, industrial applications, electronics, and medical products. The company uses 3D design software as development aids for metal raw materials such as copper, aluminum, titanium alloys, steel, and stainless steel, and complex multi-axis machines to enable Various metal materials to be processed in a single machine; and through on-site monitoring software. Geographically, it operates in Thailand, China, United States of America, and Others. The company generates maximum revenue from Thailand.
67GF Score
Get the complete analysis for TPE:4569
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4569 has been successfully added to your 
