Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Endo Manufacturing CoTSE:7841 +0.72%71 5-Year Yield-on-Cost % is 13.20 as of Aug. 07, 2026, which is 71% above its 10-year median of 7.71. GuruFocus rates TSE:7841 with a GF Score™ of 71/100 and a GF Value™ of 円1,251.50 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 411 Travel & Leisure companies, Endo Manufacturing Co ranks better than 92.21% on this metric.
Endo Manufacturing Co's yield on cost for the quarter that ended in Dec. 2025 was 13.20.
The historical rank and industry rank for Endo Manufacturing Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:7841'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 3.55 Med: 7.71 Max: 17
Current: 13.2
During the past 13 years, Endo Manufacturing Co's highest Yield on Cost was 17.00. The lowest was 3.55. And the median was 7.71.
TSE:7841's 5-Year Yield-on-Cost % is ranked better than 92.21% of 411
companies
in the Travel & Leisure industry
Industry Median: 3.06
vs TSE:7841: 13.20
Endo Manufacturing Co (TSE:7841) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Endo Manufacturing Co 5-Year Yield-on-Cost % Related Terms
TSE:7841 vs AS, HAS, LTH: 5-Year Yield-on-Cost % Comparison
For the Leisure subindustry, Endo Manufacturing Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Endo Manufacturing Co 5-Year Yield-on-Cost % vs Travel & Leisure Industry
For the Travel & Leisure industry and Consumer Cyclical sector, Endo Manufacturing Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Endo Manufacturing Co's 5-Year Yield-on-Cost % falls into.
Endo Manufacturing Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Endo Manufacturing Co (TSE:7841) has a 5-Year Yield-on-Cost % of 13.20 as of Aug. 07, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Endo Manufacturing Co and its competitors. This is 71% above median its historical median of 7.71. Over the past decade, Endo Manufacturing Co's 5-Year Yield-on-Cost % has ranged from 3.55 to 17.00. According to the industry distribution chart, Endo Manufacturing Co ranks #32 out of 411 companies in the Travel & Leisure industry, placing it in the top 7.8%.
Is Endo Manufacturing Co's 5-Year Yield-on-Cost % too high?
Endo Manufacturing Co's current 5-Year Yield-on-Cost % of 13.20 is 71% above median its 10-year median of 7.71. Over the past 10 years, this metric has ranged from a low of 3.55 to a high of 17.00. The Travel & Leisure industry median 5-Year Yield-on-Cost % is 3.06. Endo Manufacturing Co's value of 13.20 is 331.4% above this industry median. Based on the distribution chart, Endo Manufacturing Co ranks #32 out of 411 companies in the Travel & Leisure industry, which is in the top quartile — a strong position relative to peers. Overall, Endo Manufacturing Co has a GF Score™ of 71/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Endo Manufacturing Co's 5-Year Yield-on-Cost % compare to AS and HAS?
According to the Travel & Leisure industry distribution chart, Endo Manufacturing Co ranks #32 out of 411 companies for 5-Year Yield-on-Cost %. This places Endo Manufacturing Co in the top 8% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 3.06. Endo Manufacturing Co's value of 13.20 is 331.4% above this benchmark. Historically, Endo Manufacturing Co's own 5-Year Yield-on-Cost % has ranged from 3.55 to 17.00 over the past decade. While the company's 10-year median is 7.71 vs. the industry median of 3.06, Endo Manufacturing Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Travel & Leisure company?
The median 5-Year Yield-on-Cost % among Travel & Leisure companies is 3.06, based on 411 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Endo Manufacturing Co's current 5-Year Yield-on-Cost % of 13.20 is 331.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Endo Manufacturing Co and its competitors. For the Travel & Leisure industry, the median 5-Year Yield-on-Cost % is 3.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Endo Manufacturing Co's current 5-Year Yield-on-Cost % is 13.20, which is 71% above median its own 10-year median of 7.71. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Endo Manufacturing Co stock overvalued right now?
Based on GuruFocus' analysis, Endo Manufacturing Co (TSE:7841) is currently considered Modestly Undervalued. The stock's GF Value™ is 円1,251.50, compared to a current price of 円1,116.00 — trading 10.8% below its estimated fair value. The current 5-Year Yield-on-Cost % is 13.20, which is 71% above median its 10-year median of 7.71 and 331.4% above the Travel & Leisure industry median of 3.06. Endo Manufacturing Co's overall GF Score™ is 71/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Endo Manufacturing Co (TSE:7841), the current 5-Year Yield-on-Cost % is 13.20 as of Aug. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Endo Manufacturing Co (TSE:7841) Overvalued in 2026?
Based on GuruFocus' analysis, Endo Manufacturing Co stock appears to be undervalued.
The current stock price of 円1,116.00 is trading 10.8% below its estimated GF Value™ of 円1,251.50.
GuruFocus considers Endo Manufacturing Co to be Modestly Undervalued.
Key valuation signals for TSE:7841:
5-Year Yield-on-Cost %: 13.20 (71% above median its 10-year median of 7.71)
GF Value™: 円1,251.50 vs. price of 円1,116.00 (10.8% below fair value)
Industry Position: 331.4% above the Travel & Leisure median (#32 of 411)
No single metric tells the full story. See the TSE:7841 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Endo Manufacturing Co Ltd is engaged in the manufacture and sale of golf club head, metal sleeve products, forged parts, and medical equipment. The business of the company includes product development, mold making, precision forging, welding, polishing, and assembly inspection.
71GF Score
Get the complete analysis for TSE:7841
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:7841 has been successfully added to your 
