Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Cash Conversion Cycle Explanation
Generally, the lower this number is, the better for the company. Although it should be combined with other metrics (such as ROE % and ROA %), it can be especially useful for comparing close competitors, because the company with the lowest CCC is often the one with better management.
Be Aware
CCC is most effective with retail-type companies, which have inventories that are sold to customers. Consulting businesses, software companies and insurance companies are all examples of companies for whom this metric is meaningless.
The CCC is one of several tools that can help you evaluate management, especially if it is calculated for several consecutive time periods and for several competitors. Decreasing or steady CCCs are good, while rising ones should motivate you to dig a bit deeper.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Cash Conversion Cycle Related Terms
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Cash Conversion Cycle Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Cash Conversion Cycle Chart
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Annual Data
IST:MAKIM vs GEV, ETN, PH: Cash Conversion Cycle Comparison
For the Specialty Industrial Machinery subindustry, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Cash Conversion Cycle, along with its competitors' market caps and Cash Conversion Cycle data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Cash Conversion Cycle vs Industrial Products Industry
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Cash Conversion Cycle Calculation
Cash Conversion Cycle (CCC) measures how fast a company can convert cash on hand into even more cash on hand. This metric looks at the amount of time needed to sell inventory, the amount of time needed to collect receivables and the length of time the company is afforded to pay its bills without incurring penalties.
Cash Conversion Cycle is one of several measures of management effectiveness.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) has a Cash Conversion Cycle of 117.91 as of Mar. 2026. Cash conversion cycle equals sum of days inventory and days sales outstanding less days payable. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Cash Conversion Cycle too high?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Cash Conversion Cycle is 117.91. The Industrial Products industry median Cash Conversion Cycle is 122.29. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 117.91 is 3.6% below this industry median. Overall, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Cash Conversion Cycle compare to GEV and ETN?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Cash Conversion Cycle of 117.91 can be compared against companies in the Industrial Products industry. The industry median Cash Conversion Cycle is 122.29. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 117.91 is 3.6% below this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cash Conversion Cycle for an Industrial Products company?
The median Cash Conversion Cycle among Industrial Products companies is 122.29, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a Cash Conversion Cycle significantly above this median, while those in the bottom quartile fall well below. However, Cash Conversion Cycle should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Cash Conversion Cycle of 117.91 is 3.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cash Conversion Cycle mean?
A high Cash Conversion Cycle can signal that a stock is expensive relative to its fundamentals. Cash conversion cycle equals sum of days inventory and days sales outstanding less days payable. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. For the Industrial Products industry, the median Cash Conversion Cycle is 122.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Cash Conversion Cycle is 117.91. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock overvalued right now?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) is currently considered Modestly Undervalued. The stock's GF Value™ is ₺26.37, compared to a current price of ₺19.05 — trading 27.8% below its estimated fair value. The current Cash Conversion Cycle is 117.91 and 3.6% below the Industrial Products industry median of 122.29. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's overall GF Score™ is 82/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cash Conversion Cycle calculated?
Cash Conversion Cycle is calculated from a company's financial statements. For Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM), the current Cash Conversion Cycle is 117.91 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Overvalued in 2026?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock appears to be undervalued.
The current stock price of ₺19.05 is trading 27.8% below its estimated GF Value™ of ₺26.37.
GuruFocus considers Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi to be Modestly Undervalued.
Key valuation signals for IST:MAKIM:
Cash Conversion Cycle: 117.91
GF Value™: ₺26.37 vs. price of ₺19.05 (27.8% below fair value)
Industry Position: 3.6% below the Industrial Products median
No single metric tells the full story. See the IST:MAKIM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Business Description
Makim Makina Teknolojileri Sanayi Ve Ticaret Anonim Sirketi engages in production of own designed plunge electro erosion machines. It works on the design, development, and production issues of the electromechanical devices. It offers Turnstile Systems, Biometric Systems, Access Control Systems, Cameras and Accessories, and Alarm Systems, among others. It operates in three main sectors namely Access Control, Investment Casting, and Doner Cutting Equipment.
82GF Score
Get the complete analysis for IST:MAKIM
Cash Conversion Cycle is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
IST:MAKIM has been successfully added to your 
