IST:MAKIM's Current Ratio is ranked worse than 61.47% of 3073
companies
in the Industrial Products industry
Industry Median: 1.96
vs IST:MAKIM: 1.67
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Current Ratio Related Terms
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Current Ratio Chart
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Annual Data
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Current Ratio vs Industrial Products Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) has a Current Ratio of 1.67 as of Mar. 2026. This is 41% below median its historical median of 2.85. Over the past decade, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Current Ratio has ranged from 1.67 to 4.71. According to the industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1889 out of 3073 companies in the Industrial Products industry, placing it in the top 61.5%.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Current Ratio too high?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Current Ratio of 1.67 is 41% below median its 10-year median of 2.85. Over the past 10 years, this metric has ranged from a low of 1.67 to a high of 4.71. The Industrial Products industry median Current Ratio is 1.96. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 1.67 is 14.8% below this industry median. Based on the distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1889 out of 3073 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1889 out of 3073 companies for Current Ratio. This places Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi in the lower half of its industry. The industry median Current Ratio is 1.96. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 1.67 is 14.8% below this benchmark. Historically, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's own Current Ratio has ranged from 1.67 to 4.71 over the past decade. While the company's 10-year median is 2.85 vs. the industry median of 1.96, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.96, based on 3,073 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Current Ratio of 1.67 is 14.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Current Ratio is 1.67, which is 41% below median its own 10-year median of 2.85. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock overvalued right now?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) is currently considered Modestly Undervalued. The stock's GF Value™ is ₺26.30, compared to a current price of ₺19.05 — trading 27.6% below its estimated fair value. The current Current Ratio is 1.67, which is 41% below median its 10-year median of 2.85 and 14.8% below the Industrial Products industry median of 1.96. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's overall GF Score™ is 82/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM), the current Current Ratio is 1.67 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Overvalued in 2026?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock appears to be undervalued.
The current stock price of ₺19.05 is trading 27.6% below its estimated GF Value™ of ₺26.30.
GuruFocus considers Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi to be Modestly Undervalued.
Key valuation signals for IST:MAKIM:
Current Ratio: 1.67 (41% below median its 10-year median of 2.85)
GF Value™: ₺26.30 vs. price of ₺19.05 (27.6% below fair value)
Industry Position: 14.8% below the Industrial Products median (#1889 of 3073)
No single metric tells the full story. See the IST:MAKIM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Business Description
Makim Makina Teknolojileri Sanayi Ve Ticaret Anonim Sirketi engages in production of own designed plunge electro erosion machines. It works on the design, development, and production issues of the electromechanical devices. It offers Turnstile Systems, Biometric Systems, Access Control Systems, Cameras and Accessories, and Alarm Systems, among others. It operates in three main sectors namely Access Control, Investment Casting, and Doner Cutting Equipment.
82GF Score
Get the complete analysis for IST:MAKIM
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
IST:MAKIM has been successfully added to your 
