Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Debt-to-EBITDA Related Terms
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Debt-to-EBITDA Chart
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Annual Data
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Debt-to-EBITDA vs Industrial Products Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) has a Debt-to-EBITDA of 3.15 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi. This is 506% above median its historical median of 0.52. Over the past decade, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Debt-to-EBITDA has ranged from 0.01 to 3.10. According to the industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1563 out of 2332 companies in the Industrial Products industry, placing it in the top 67%.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Debt-to-EBITDA too high?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Debt-to-EBITDA of 3.15 is 506% above median its 10-year median of 0.52. Over the past 10 years, this metric has ranged from a low of 0.01 to a high of 3.10. The Industrial Products industry median Debt-to-EBITDA is 1.70. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 3.15 is 85.3% above this industry median. Based on the distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1563 out of 2332 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a GF Score™ of 82/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1563 out of 2332 companies for Debt-to-EBITDA. This places Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi in the lower half of its industry. The industry median Debt-to-EBITDA is 1.70. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 3.15 is 85.3% above this benchmark. Historically, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's own Debt-to-EBITDA has ranged from 0.01 to 3.10 over the past decade. While the company's 10-year median is 0.52 vs. the industry median of 1.70, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.70, based on 2,332 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Debt-to-EBITDA of 3.15 is 85.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi. For the Industrial Products industry, the median Debt-to-EBITDA is 1.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Debt-to-EBITDA is 3.15, which is 506% above median its own 10-year median of 0.52. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock overvalued right now?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) is currently considered Significantly Undervalued. The stock's GF Value™ is ₺26.72, compared to a current price of ₺17.10 — trading 36% below its estimated fair value. The current Debt-to-EBITDA is 3.15, which is 506% above median its 10-year median of 0.52 and 85.3% above the Industrial Products industry median of 1.70. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's overall GF Score™ is 82/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM), the current Debt-to-EBITDA is 3.15 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Overvalued in 2026?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock appears to be undervalued.
The current stock price of ₺17.10 is trading 36% below its estimated GF Value™ of ₺26.72.
GuruFocus considers Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi to be Significantly Undervalued.
Key valuation signals for IST:MAKIM:
Debt-to-EBITDA: 3.15 (506% above median its 10-year median of 0.52)
GF Value™: ₺26.72 vs. price of ₺17.10 (36% below fair value)
Industry Position: 85.3% above the Industrial Products median (#1563 of 2332)
No single metric tells the full story. See the IST:MAKIM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Business Description
Makim Makina Teknolojileri Sanayi Ve Ticaret Anonim Sirketi engages in production of own designed plunge electro erosion machines. It works on the design, development, and production issues of the electromechanical devices. It offers Turnstile Systems, Biometric Systems, Access Control Systems, Cameras and Accessories, and Alarm Systems, among others. It operates in three main sectors namely Access Control, Investment Casting, and Doner Cutting Equipment.
82GF Score
Get the complete analysis for IST:MAKIM
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
IST:MAKIM has been successfully added to your 
