Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
IST:MAKIM's Price-to-Net-Cash is not ranked *
in the Industrial Products industry.
Industry Median: 10.53 * Ranked among companies with meaningful Price-to-Net-Cash only.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Net Cash per Share Explanation
Ben Graham invested in situations where the company's stock price was lower than its net-cash. He assigned some value to the company's other current asset. The value is called Net Current Asset Value (NCAV). One research study, covering the years 1970 through 1983 showed that portfolios picked at the beginning of each year, and held for one year, returned 29.4 percent, on average, over the 13-year period, compared to 11.5 percent for the S&P 500 Index. Other studies of Graham's strategy produced similar results.
You can find companies that are traded below their Net Current Asset Value (NCAV) with our Net-Net screener.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Net Cash per Share Related Terms
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Net Cash per Share Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Net Cash per Share Chart
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Annual Data
Trend
Dec21
Dec22
Dec23
Dec24
Dec25
Net Cash per Share
0.03
-0.24
-1.17
-1.74
-3.27
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Quarterly Data
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Price-to-Net-Cash vs Industrial Products Industry
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Net Cash per Share Calculation
In the calculation of a company's Net Cash per Share, assets other than cash and short term investments are considered to be worth nothing. But the company has to pay its debt and other liabilities in full. This is an extremely conservative way of valuation. Most companies have negative Net Cash per Share. But sometimes a company's price may be lower than its net-cash.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) has a Net Cash per Share of ₺-4.55 as of Jun. 2026. Net cash per share equals the per-share value of cash and equivalents less total liabilities and minority interest. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. According to the industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #999999 out of 603 companies in the Industrial Products industry.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Net Cash per Share too high?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Net Cash per Share is ₺-4.55. Based on the distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #999999 out of 603 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a GF Score™ of 77/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Net Cash per Share compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #999999 out of 603 companies for Net Cash per Share. This places Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi in the lower half of its industry. The industry median Net Cash per Share is 10.53. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net Cash per Share for an Industrial Products company?
The median Net Cash per Share among Industrial Products companies is 10.53, based on 603 companies in the industry. Companies in the top quartile (top 25%) have a Net Cash per Share significantly above this median, while those in the bottom quartile fall well below. However, Net Cash per Share should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net Cash per Share mean?
A high Net Cash per Share can signal that a stock is expensive relative to its fundamentals. Net cash per share equals the per-share value of cash and equivalents less total liabilities and minority interest. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. For the Industrial Products industry, the median Net Cash per Share is 10.53 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Net Cash per Share is ₺-4.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock overvalued right now?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) is currently considered Significantly Undervalued. The stock's GF Value™ is ₺33.50, compared to a current price of ₺12.64 — trading 62.3% below its estimated fair value. The current Net Cash per Share is ₺-4.55. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's overall GF Score™ is 77/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net Cash per Share calculated?
Net Cash per Share is calculated from a company's financial statements. For Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM), the current Net Cash per Share is ₺-4.55 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Overvalued in 2026?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock appears to be undervalued.
The current stock price of ₺12.64 is trading 62.3% below its estimated GF Value™ of ₺33.50.
GuruFocus considers Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi to be Significantly Undervalued.
Key valuation signals for IST:MAKIM:
Net Cash per Share: ₺-4.55
GF Value™: ₺33.50 vs. price of ₺12.64 (62.3% below fair value)
No single metric tells the full story. See the IST:MAKIM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makim Makina Teknolojileri Sanayi Ve Ticaret Anonim Sirketi engages in production of own designed plunge electro erosion machines. It works on the design, development, and production issues of the electromechanical devices. It offers Turnstile Systems, Biometric Systems, Access Control Systems, Cameras and Accessories, and Alarm Systems, among others. It operates in three main sectors namely Access Control, Investment Casting, and Doner Cutting Equipment.
77GF Score
Get the complete analysis for IST:MAKIM
Net Cash per Share is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
IST:MAKIM has been successfully added to your 
