The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Good Sign:
Altman Z-score of 3.14 is strong.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a Altman Z-Score of 3.12, indicating it is in Safe Zones. This implies the Altman Z-Score is strong.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Altman Z-Score Chart
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Annual Data
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Altman Z-Score vs Industrial Products Industry
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Altman Z-Score Calculation
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) has a Altman Z-Score of 3.12 as of Jun. 30, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. This is 68% below median its historical median of 9.64. Over the past decade, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Altman Z-Score has ranged from 2.84 to 17.65. According to the industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1602 out of 3005 companies in the Industrial Products industry, placing it in the top 53.3%.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Altman Z-Score too high?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Altman Z-Score of 3.12 is 68% below median its 10-year median of 9.64. Over the past 10 years, this metric has ranged from a low of 2.84 to a high of 17.65. The Industrial Products industry median Altman Z-Score is 3.33. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 3.12 is 6.3% below this industry median. Based on the distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1602 out of 3005 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Altman Z-Score compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1602 out of 3005 companies for Altman Z-Score. This places Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi in the lower half of its industry. The industry median Altman Z-Score is 3.33. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 3.12 is 6.3% below this benchmark. Historically, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's own Altman Z-Score has ranged from 2.84 to 17.65 over the past decade. While the company's 10-year median is 9.64 vs. the industry median of 3.33, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Industrial Products company?
The median Altman Z-Score among Industrial Products companies is 3.33, based on 3,005 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Altman Z-Score of 3.12 is 6.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. For the Industrial Products industry, the median Altman Z-Score is 3.33 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Altman Z-Score is 3.12, which is 68% below median its own 10-year median of 9.64. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock overvalued right now?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) is currently considered Modestly Undervalued. The stock's GF Value™ is ₺26.30, compared to a current price of ₺19.05 — trading 27.6% below its estimated fair value. The current Altman Z-Score is 3.12, which is 68% below median its 10-year median of 9.64 and 6.3% below the Industrial Products industry median of 3.33. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's overall GF Score™ is 82/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM), the current Altman Z-Score is 3.12 as of Jun. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Overvalued in 2026?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock appears to be undervalued.
The current stock price of ₺19.05 is trading 27.6% below its estimated GF Value™ of ₺26.30.
GuruFocus considers Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi to be Modestly Undervalued.
Key valuation signals for IST:MAKIM:
Altman Z-Score: 3.12 (68% below median its 10-year median of 9.64)
GF Value™: ₺26.30 vs. price of ₺19.05 (27.6% below fair value)
Industry Position: 6.3% below the Industrial Products median (#1602 of 3005)
No single metric tells the full story. See the IST:MAKIM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Business Description
Makim Makina Teknolojileri Sanayi Ve Ticaret Anonim Sirketi engages in production of own designed plunge electro erosion machines. It works on the design, development, and production issues of the electromechanical devices. It offers Turnstile Systems, Biometric Systems, Access Control Systems, Cameras and Accessories, and Alarm Systems, among others. It operates in three main sectors namely Access Control, Investment Casting, and Doner Cutting Equipment.
82GF Score
Get the complete analysis for IST:MAKIM
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
IST:MAKIM has been successfully added to your 
