IST:MAKIM's Quick Ratio is ranked worse than 63.17% of 3071
companies
in the Industrial Products industry
Industry Median: 1.39
vs IST:MAKIM: 1.11
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Quick Ratio Related Terms
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Quick Ratio Chart
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Annual Data
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Quick Ratio vs Industrial Products Industry
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) has a Quick Ratio of 1.11 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. This is 48% below median its historical median of 2.12. Over the past decade, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Quick Ratio has ranged from 1.11 to 3.67. According to the industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1940 out of 3071 companies in the Industrial Products industry, placing it in the top 63.2%.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Quick Ratio too high?
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Quick Ratio of 1.11 is 48% below median its 10-year median of 2.12. Over the past 10 years, this metric has ranged from a low of 1.11 to a high of 3.67. The Industrial Products industry median Quick Ratio is 1.39. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 1.11 is 20.1% below this industry median. Based on the distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1940 out of 3071 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi ranks #1940 out of 3071 companies for Quick Ratio. This places Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi in the lower half of its industry. The industry median Quick Ratio is 1.39. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's value of 1.11 is 20.1% below this benchmark. Historically, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's own Quick Ratio has ranged from 1.11 to 3.67 over the past decade. While the company's 10-year median is 2.12 vs. the industry median of 1.39, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Quick Ratio of 1.11 is 20.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's current Quick Ratio is 1.11, which is 48% below median its own 10-year median of 2.12. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock overvalued right now?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) is currently considered Modestly Undervalued. The stock's GF Value™ is ₺26.30, compared to a current price of ₺19.05 — trading 27.6% below its estimated fair value. The current Quick Ratio is 1.11, which is 48% below median its 10-year median of 2.12 and 20.1% below the Industrial Products industry median of 1.39. Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi's overall GF Score™ is 82/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM), the current Quick Ratio is 1.11 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi (IST:MAKIM) Overvalued in 2026?
Based on GuruFocus' analysis, Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi stock appears to be undervalued.
The current stock price of ₺19.05 is trading 27.6% below its estimated GF Value™ of ₺26.30.
GuruFocus considers Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi to be Modestly Undervalued.
Key valuation signals for IST:MAKIM:
Quick Ratio: 1.11 (48% below median its 10-year median of 2.12)
GF Value™: ₺26.30 vs. price of ₺19.05 (27.6% below fair value)
Industry Position: 20.1% below the Industrial Products median (#1940 of 3071)
No single metric tells the full story. See the IST:MAKIM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makim Makina Teknolojilerinayi Ve Ticaret Anonim Sirketi Business Description
Makim Makina Teknolojileri Sanayi Ve Ticaret Anonim Sirketi engages in production of own designed plunge electro erosion machines. It works on the design, development, and production issues of the electromechanical devices. It offers Turnstile Systems, Biometric Systems, Access Control Systems, Cameras and Accessories, and Alarm Systems, among others. It operates in three main sectors namely Access Control, Investment Casting, and Doner Cutting Equipment.
82GF Score
Get the complete analysis for IST:MAKIM
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
IST:MAKIM has been successfully added to your 
