Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Min Aik Precision Industrial Co has a Cash Ratio of 0.50. It indicates that there are more current liabilities than Cash, Cash Equivalents, Marketable Securities, and the company does not have sufficient cash on hand to pay off its short-term debt.
The historical rank and industry rank for Min Aik Precision Industrial Co's Cash Ratio or its related term are showing as below:
TPE:4545'
s Cash Ratio Range Over the Past 10 Years
Min: 0.5 Med: 0.99 Max: 1.65
Current: 0.5
During the past 13 years, Min Aik Precision Industrial Co's highest Cash Ratio was 1.65. The lowest was 0.50. And the median was 0.99.
TPE:4545's Cash Ratio is ranked worse than 50.55% of 2975
companies
in the Industrial Products industry
Industry Median: 0.51
vs TPE:4545: 0.50
Min Aik Precision Industrial Co (TPE:4545) Cash Ratio Explanation
The cash ratio is more conservative than other liquidity ratios, such as Quick Ratio and Current Ratio, because it only considers a company's most liquid resources. The numerator of cash ratio only considers Cash, Cash Equivalents and marketable securities. Other current assets, such as accounts receivable and inventories, are not included. The rationale is that these assets may require time to be transformed into cash, and the amount of money received is also uncertain.
The cash ratio shows a company’s ability to pay all current liabilities immediately without selling or liquidating other assets. Generally speaking, a higher cash ratio suggests the company has a stronger ability to cover its short-term debt. However, a high cash ratio could also indicate inefficient management: the company is inefficient in making full utilization of cash to invest protential profitable project. It may also suggest that the company is not confident about future profitability.
In general, the higher the cash ratio, the better the company's liquidity position.
Min Aik Precision Industrial Co Cash Ratio Related Terms
Min Aik Precision Industrial Co Cash Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Min Aik Precision Industrial Co's Cash Ratio, along with its competitors' market caps and Cash Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Precision Industrial Co Cash Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Min Aik Precision Industrial Co's Cash Ratio distribution charts can be found below:
* The bar in red indicates where Min Aik Precision Industrial Co's Cash Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Min Aik Precision Industrial Co (TPE:4545) has a Cash Ratio of 0.50 as of Jun. 2026. Cashflow ratio is the ratio of Cash, Cash Equivalents, Marketable Securities to current liabilities. View historical data on Min Aik Precision Industrial Co and its competitors. This is 49% below median its historical median of 0.99. Over the past decade, Min Aik Precision Industrial Co's Cash Ratio has ranged from 0.50 to 1.65. According to the industry distribution chart, Min Aik Precision Industrial Co ranks #1504 out of 2975 companies in the Industrial Products industry, placing it in the top 50.6%.
Is Min Aik Precision Industrial Co's Cash Ratio too high?
Min Aik Precision Industrial Co's current Cash Ratio of 0.50 is 49% below median its 10-year median of 0.99. Over the past 10 years, this metric has ranged from a low of 0.50 to a high of 1.65. The Industrial Products industry median Cash Ratio is 0.51. Min Aik Precision Industrial Co's value of 0.50 is 2% below this industry median. Based on the distribution chart, Min Aik Precision Industrial Co ranks #1504 out of 2975 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Min Aik Precision Industrial Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Precision Industrial Co's Cash Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Min Aik Precision Industrial Co ranks #1504 out of 2975 companies for Cash Ratio. This places Min Aik Precision Industrial Co in the lower half of its industry. The industry median Cash Ratio is 0.51. Min Aik Precision Industrial Co's value of 0.50 is 2% below this benchmark. Historically, Min Aik Precision Industrial Co's own Cash Ratio has ranged from 0.50 to 1.65 over the past decade. While the company's 10-year median is 0.99 vs. the industry median of 0.51, Min Aik Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cash Ratio for an Industrial Products company?
The median Cash Ratio among Industrial Products companies is 0.51, based on 2,975 companies in the industry. Companies in the top quartile (top 25%) have a Cash Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cash Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Min Aik Precision Industrial Co's current Cash Ratio of 0.50 is 2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cash Ratio mean?
A high Cash Ratio can signal that a stock is expensive relative to its fundamentals. Cashflow ratio is the ratio of Cash, Cash Equivalents, Marketable Securities to current liabilities. View historical data on Min Aik Precision Industrial Co and its competitors. For the Industrial Products industry, the median Cash Ratio is 0.51 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Precision Industrial Co's current Cash Ratio is 0.50, which is 49% below median its own 10-year median of 0.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co (TPE:4545) is currently considered Fairly Valued. The stock's GF Value™ is NT$34.57, compared to a current price of NT$32.15 — trading 7% below its estimated fair value. The current Cash Ratio is 0.50, which is 49% below median its 10-year median of 0.99 and 2% below the Industrial Products industry median of 0.51. Min Aik Precision Industrial Co's overall GF Score™ is 81/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cash Ratio calculated?
Cash Ratio is calculated from a company's financial statements. For Min Aik Precision Industrial Co (TPE:4545), the current Cash Ratio is 0.50 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Precision Industrial Co (TPE:4545) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co stock appears to be undervalued.
The current stock price of NT$32.15 is trading 7% below its estimated GF Value™ of NT$34.57.
GuruFocus considers Min Aik Precision Industrial Co to be Fairly Valued.
Key valuation signals for TPE:4545:
Cash Ratio: 0.50 (49% below median its 10-year median of 0.99)
GF Value™: NT$34.57 vs. price of NT$32.15 (7% below fair value)
Industry Position: 2% below the Industrial Products median (#1504 of 2975)
No single metric tells the full story. See the TPE:4545 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Precision Industrial Co Ltd is engaged in the processing and manufacturing of electroplating of aluminum and copper products, precision stamping components, and electroless nickel plating. It has three reportable segments: the Company, MAPP, and AMO. The company which generates key revenue, engages mainly in the development, design, and manufacture of precise components. MAPP engages mainly in the development and manufacture of medical plastic injection and molding. AMO engages mainly in the development, manufacture, and selling of automatic machines. Geographically, it derives a majority of its revenue from Singapore and Malaysia and the rest from China, Taiwan, Ireland, Thailand, and other countries.
81GF Score
Get the complete analysis for TPE:4545
Cash Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4545 has been successfully added to your 
