Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Min Aik Precision Industrial Co's Debt-to-EBITDA or its related term are showing as below:
TPE:4545'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.47 Med: 2.68 Max: 8.18
Current: 5.33
During the past 13 years, the highest Debt-to-EBITDA Ratio of Min Aik Precision Industrial Co was 8.18. The lowest was 0.47. And the median was 2.68.
TPE:4545's Debt-to-EBITDA is ranked worse than 80.86% of 2325
companies
in the Industrial Products industry
Industry Median: 1.71
vs TPE:4545: 5.33
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Min Aik Precision Industrial Co Debt-to-EBITDA Related Terms
Min Aik Precision Industrial Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Min Aik Precision Industrial Co Debt-to-EBITDA Chart
TPE:4545 vs CRS, ATI, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, Min Aik Precision Industrial Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Precision Industrial Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Min Aik Precision Industrial Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Min Aik Precision Industrial Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Min Aik Precision Industrial Co (TPE:4545) has a Debt-to-EBITDA of 3.30 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Min Aik Precision Industrial Co. This is 23% above median its historical median of 2.68. Over the past decade, Min Aik Precision Industrial Co's Debt-to-EBITDA has ranged from 0.47 to 8.18. According to the industry distribution chart, Min Aik Precision Industrial Co ranks #1880 out of 2325 companies in the Industrial Products industry, placing it in the top 80.9%.
Is Min Aik Precision Industrial Co's Debt-to-EBITDA too high?
Min Aik Precision Industrial Co's current Debt-to-EBITDA of 3.30 is 23% above median its 10-year median of 2.68. Over the past 10 years, this metric has ranged from a low of 0.47 to a high of 8.18. The Industrial Products industry median Debt-to-EBITDA is 1.71. Min Aik Precision Industrial Co's value of 3.30 is 93% above this industry median. Based on the distribution chart, Min Aik Precision Industrial Co ranks #1880 out of 2325 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Min Aik Precision Industrial Co has a GF Score™ of 78/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Precision Industrial Co's Debt-to-EBITDA compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Min Aik Precision Industrial Co ranks #1880 out of 2325 companies for Debt-to-EBITDA. This places Min Aik Precision Industrial Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.71. Min Aik Precision Industrial Co's value of 3.30 is 93% above this benchmark. Historically, Min Aik Precision Industrial Co's own Debt-to-EBITDA has ranged from 0.47 to 8.18 over the past decade. While the company's 10-year median is 2.68 vs. the industry median of 1.71, Min Aik Precision Industrial Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.71, based on 2,325 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Min Aik Precision Industrial Co's current Debt-to-EBITDA of 3.30 is 93% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Min Aik Precision Industrial Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.71 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Precision Industrial Co's current Debt-to-EBITDA is 3.30, which is 23% above median its own 10-year median of 2.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co (TPE:4545) is currently considered Fairly Valued. The stock's GF Value™ is NT$32.77, compared to a current price of NT$32.75 — trading 0.1% below its estimated fair value. The current Debt-to-EBITDA is 3.30, which is 23% above median its 10-year median of 2.68 and 93% above the Industrial Products industry median of 1.71. Min Aik Precision Industrial Co's overall GF Score™ is 78/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Min Aik Precision Industrial Co (TPE:4545), the current Debt-to-EBITDA is 3.30 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Precision Industrial Co (TPE:4545) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co stock appears to be undervalued.
The current stock price of NT$32.75 is trading 0.1% below its estimated GF Value™ of NT$32.77.
GuruFocus considers Min Aik Precision Industrial Co to be Fairly Valued.
Key valuation signals for TPE:4545:
Debt-to-EBITDA: 3.30 (23% above median its 10-year median of 2.68)
GF Value™: NT$32.77 vs. price of NT$32.75 (0.1% below fair value)
Industry Position: 93% above the Industrial Products median (#1880 of 2325)
No single metric tells the full story. See the TPE:4545 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Precision Industrial Co Ltd is engaged in the processing and manufacturing of electroplating of aluminum and copper products, precision stamping components, and electroless nickel plating. It has three reportable segments: the Company, MAPP, and AMO. The company which generates key revenue, engages mainly in the development, design, and manufacture of precise components. MAPP engages mainly in the development and manufacture of medical plastic injection and molding. AMO engages mainly in the development, manufacture, and selling of automatic machines. Geographically, it derives a majority of its revenue from Singapore and Malaysia and the rest from China, Taiwan, Ireland, Thailand, and other countries.
78GF Score
Get the complete analysis for TPE:4545
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4545 has been successfully added to your 
