Min Aik Precision Industrial CoTPE:4545 79 Return-on-Tangible-Equity is 2.28% as of Dec. 2025, which is 26% below its 10-year median of 3.09. GuruFocus rates TPE:4545 with a GF Score™ of 79/100 and a GF Value™ of NT$34.32 (Modestly Overvalued). The stock has 8 warning signs investors should review. Among 2,968 Industrial Products companies, Min Aik Precision Industrial Co ranks worse than 74.26% on this metric.
The historical rank and industry rank for Min Aik Precision Industrial Co's Return-on-Tangible-Equity or its related term are showing as below:
TPE:4545'
s Return-on-Tangible-Equity Range Over the Past 10 Years
Min: -3.19 Med: 3.09 Max: 12.84
Current: 0.68
During the past 13 years, Min Aik Precision Industrial Co's highest Return-on-Tangible-Equity was 12.84%. The lowest was -3.19%. And the median was 3.09%.
TPE:4545's Return-on-Tangible-Equity is ranked worse than 74.26% of 2968
companies
in the Industrial Products industry
Industry Median: 6.725
vs TPE:4545: 0.68
Min Aik Precision Industrial Co (TPE:4545) Return-on-Tangible-Equity Explanation
Return-on-Tangible-Equity measures the rate of return on the ownership interest (shareholder's tangible equity) of the common stock owners. It measures a firm's efficiency at generating profits from every unit of shareholders' tangible equity (shareholders equity minus intangibles). Return-on-Tangible-Equity shows how well a company uses investment funds to generate earnings growth. Return-on-Tangible-Equitys between 15% and 20% are considered desirable.
Be Aware
Net Income is used.
Because a company can increase its Return-on-Tangible-Equity by having more financial leverage, it is important to watch the leverage ratio when investing in high Return-on-Tangible-Equity companies. Like Return-on-Tangible-Asset, Return-on-Tangible-Equity is calculated with only 12 months data. Fluctuations in company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective.
Asset light businesses require very few assets to generate very high earnings. Their Return-on-Tangible-Equitys can be extremely high.
Min Aik Precision Industrial Co Return-on-Tangible-Equity Related Terms
Min Aik Precision Industrial Co Return-on-Tangible-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Min Aik Precision Industrial Co Return-on-Tangible-Equity Chart
TPE:4545 vs CRS, ATI, MLI: Return-on-Tangible-Equity Comparison
For the Metal Fabrication subindustry, Min Aik Precision Industrial Co's Return-on-Tangible-Equity, along with its competitors' market caps and Return-on-Tangible-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Precision Industrial Co Return-on-Tangible-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Min Aik Precision Industrial Co's Return-on-Tangible-Equity distribution charts can be found below:
* The bar in red indicates where Min Aik Precision Industrial Co's Return-on-Tangible-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Return-on-Tangible-Equity, the net income of the last fiscal year and the average total shareholder tangible equity over the fiscal year are used. In calculating the quarterly data,
the net income data used here is four times the quarterly (Dec. 2025) net income data.
Return-on-Tangible-Equity is displayed in the 10-year financial page.
What does a Return-on-Tangible-Equity of 2.28% mean?
Min Aik Precision Industrial Co (TPE:4545) has a Return-on-Tangible-Equity of 2.28% as of Dec. 2025. Return on tangible equity is the ratio of current-period net income to average two-period tangible equity. View historical data on Min Aik Precision Industrial Co and its competitors. This is 26% below median its historical median of 3.09. According to the industry distribution chart, Min Aik Precision Industrial Co ranks #2204 out of 2968 companies in the Industrial Products industry, placing it in the top 74.3%.
Is Min Aik Precision Industrial Co's Return-on-Tangible-Equity too high?
Min Aik Precision Industrial Co's current Return-on-Tangible-Equity of 2.28% is 26% below median its 10-year median of 3.09. The Industrial Products industry median Return-on-Tangible-Equity is 6.73. Min Aik Precision Industrial Co's value of 2.28% is 66.1% below this industry median. Based on the distribution chart, Min Aik Precision Industrial Co ranks #2204 out of 2968 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Min Aik Precision Industrial Co has a GF Score™ of 79/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Precision Industrial Co's Return-on-Tangible-Equity compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Min Aik Precision Industrial Co ranks #2204 out of 2968 companies for Return-on-Tangible-Equity. This places Min Aik Precision Industrial Co in the lower half of its industry. The industry median Return-on-Tangible-Equity is 6.73. Min Aik Precision Industrial Co's value of 2.28% is 66.1% below this benchmark. While the company's 10-year median is 3.09 vs. the industry median of 6.73, Min Aik Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Return-on-Tangible-Equity for an Industrial Products company?
The median Return-on-Tangible-Equity among Industrial Products companies is 6.73, based on 2,968 companies in the industry. Companies in the top quartile (top 25%) have a Return-on-Tangible-Equity significantly above this median, while those in the bottom quartile fall well below. However, Return-on-Tangible-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Min Aik Precision Industrial Co's current Return-on-Tangible-Equity of 2.28% is 66.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Return-on-Tangible-Equity mean?
A high Return-on-Tangible-Equity can signal that a stock is expensive relative to its fundamentals. Return on tangible equity is the ratio of current-period net income to average two-period tangible equity. View historical data on Min Aik Precision Industrial Co and its competitors. For the Industrial Products industry, the median Return-on-Tangible-Equity is 6.73 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Precision Industrial Co's current Return-on-Tangible-Equity is 2.28%, which is 26% below median its own 10-year median of 3.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co (TPE:4545) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$34.32, compared to a current price of NT$38.30 — trading 11.6% above its estimated fair value. The current Return-on-Tangible-Equity is 2.28%, which is 26% below median its 10-year median of 3.09 and 66.1% below the Industrial Products industry median of 6.73. Min Aik Precision Industrial Co's overall GF Score™ is 79/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Return-on-Tangible-Equity calculated?
Return-on-Tangible-Equity is calculated from a company's financial statements. For Min Aik Precision Industrial Co (TPE:4545), the current Return-on-Tangible-Equity is 2.28% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Precision Industrial Co (TPE:4545) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co stock appears to be overvalued.
The current stock price of NT$38.30 is trading 11.6% above its estimated GF Value™ of NT$34.32.
GuruFocus considers Min Aik Precision Industrial Co to be Modestly Overvalued.
Key valuation signals for TPE:4545:
Return-on-Tangible-Equity: 2.28% (26% below median its 10-year median of 3.09)
GF Value™: NT$34.32 vs. price of NT$38.30 (11.6% above fair value)
Industry Position: 66.1% below the Industrial Products median (#2204 of 2968)
No single metric tells the full story. See the TPE:4545 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Precision Industrial Co Business Description
Min Aik Precision Industrial Co Ltd is engaged in the processing and manufacturing of electroplating of aluminum and copper products, precision stamping components, and electroless nickel plating. It has three reportable segments: the Company, MAPP, and AMO. The company which generates key revenue, engages mainly in the development, design, and manufacture of precise components. MAPP engages mainly in the development and manufacture of medical plastic injection and molding. AMO engages mainly in the development, manufacture, and selling of automatic machines. Geographically, it derives a majority of its revenue from Singapore and Malaysia and the rest from China, Taiwan, Ireland, Thailand, and other countries.
79GF Score
Get the complete analysis for TPE:4545
Return-on-Tangible-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4545 has been successfully added to your 
