Min Aik Precision Industrial Co has a quick ratio of 1.20. It generally indicates good short-term financial strength.
The historical rank and industry rank for Min Aik Precision Industrial Co's Quick Ratio or its related term are showing as below:
TPE:4545'
s Quick Ratio Range Over the Past 10 Years
Min: 1.2 Med: 1.63 Max: 2.32
Current: 1.2
During the past 13 years, Min Aik Precision Industrial Co's highest Quick Ratio was 2.32. The lowest was 1.20. And the median was 1.63.
TPE:4545's Quick Ratio is ranked worse than 59.2% of 3071
companies
in the Industrial Products industry
Industry Median: 1.39
vs TPE:4545: 1.20
Min Aik Precision Industrial Co (TPE:4545) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Min Aik Precision Industrial Co Quick Ratio Related Terms
Min Aik Precision Industrial Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Min Aik Precision Industrial Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Precision Industrial Co Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Min Aik Precision Industrial Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Min Aik Precision Industrial Co's Quick Ratio falls into.
Min Aik Precision Industrial Co Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Min Aik Precision Industrial Co (TPE:4545) has a Quick Ratio of 1.20 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Min Aik Precision Industrial Co and its competitors. This is 26% below median its historical median of 1.63. Over the past decade, Min Aik Precision Industrial Co's Quick Ratio has ranged from 1.20 to 2.32. According to the industry distribution chart, Min Aik Precision Industrial Co ranks #1818 out of 3071 companies in the Industrial Products industry, placing it in the top 59.2%.
Is Min Aik Precision Industrial Co's Quick Ratio too high?
Min Aik Precision Industrial Co's current Quick Ratio of 1.20 is 26% below median its 10-year median of 1.63. Over the past 10 years, this metric has ranged from a low of 1.20 to a high of 2.32. The Industrial Products industry median Quick Ratio is 1.39. Min Aik Precision Industrial Co's value of 1.20 is 13.7% below this industry median. Based on the distribution chart, Min Aik Precision Industrial Co ranks #1818 out of 3071 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Min Aik Precision Industrial Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Precision Industrial Co's Quick Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Min Aik Precision Industrial Co ranks #1818 out of 3071 companies for Quick Ratio. This places Min Aik Precision Industrial Co in the lower half of its industry. The industry median Quick Ratio is 1.39. Min Aik Precision Industrial Co's value of 1.20 is 13.7% below this benchmark. Historically, Min Aik Precision Industrial Co's own Quick Ratio has ranged from 1.20 to 2.32 over the past decade. While the company's 10-year median is 1.63 vs. the industry median of 1.39, Min Aik Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Min Aik Precision Industrial Co's current Quick Ratio of 1.20 is 13.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Min Aik Precision Industrial Co and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Precision Industrial Co's current Quick Ratio is 1.20, which is 26% below median its own 10-year median of 1.63. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co (TPE:4545) is currently considered Fairly Valued. The stock's GF Value™ is NT$34.30, compared to a current price of NT$37.05 — trading 8% above its estimated fair value. The current Quick Ratio is 1.20, which is 26% below median its 10-year median of 1.63 and 13.7% below the Industrial Products industry median of 1.39. Min Aik Precision Industrial Co's overall GF Score™ is 81/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Min Aik Precision Industrial Co (TPE:4545), the current Quick Ratio is 1.20 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Precision Industrial Co (TPE:4545) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co stock appears to be overvalued.
The current stock price of NT$37.05 is trading 8% above its estimated GF Value™ of NT$34.30.
GuruFocus considers Min Aik Precision Industrial Co to be Fairly Valued.
Key valuation signals for TPE:4545:
Quick Ratio: 1.20 (26% below median its 10-year median of 1.63)
GF Value™: NT$34.30 vs. price of NT$37.05 (8% above fair value)
Industry Position: 13.7% below the Industrial Products median (#1818 of 3071)
No single metric tells the full story. See the TPE:4545 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Precision Industrial Co Business Description
Min Aik Precision Industrial Co Ltd is engaged in the processing and manufacturing of electroplating of aluminum and copper products, precision stamping components, and electroless nickel plating. It has three reportable segments: the Company, MAPP, and AMO. The company which generates key revenue, engages mainly in the development, design, and manufacture of precise components. MAPP engages mainly in the development and manufacture of medical plastic injection and molding. AMO engages mainly in the development, manufacture, and selling of automatic machines. Geographically, it derives a majority of its revenue from Singapore and Malaysia and the rest from China, Taiwan, Ireland, Thailand, and other countries.
81GF Score
Get the complete analysis for TPE:4545
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4545 has been successfully added to your 
