Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Min Aik Precision Industrial CoTPE:4545 80 5-Year Yield-on-Cost % is 1.70 as of Jul. 27, 2026, which is 86% below its 10-year median of 12.41. GuruFocus rates TPE:4545 with a GF Score™ of 80/100 and a GF Value™ of NT$34.34 (Fairly Valued). The stock has 8 warning signs investors should review. Among 1,922 Industrial Products companies, Min Aik Precision Industrial Co ranks worse than 53.85% on this metric.
The historical rank and industry rank for Min Aik Precision Industrial Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:4545'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.7 Med: 12.41 Max: 110.58
Current: 1.7
During the past 13 years, Min Aik Precision Industrial Co's highest Yield on Cost was 110.58. The lowest was 1.70. And the median was 12.41.
TPE:4545's 5-Year Yield-on-Cost % is ranked worse than 53.85% of 1922
companies
in the Industrial Products industry
Industry Median: 1.94
vs TPE:4545: 1.70
Min Aik Precision Industrial Co (TPE:4545) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Min Aik Precision Industrial Co 5-Year Yield-on-Cost % Related Terms
TPE:4545 vs CRS, ATI, MLI: 5-Year Yield-on-Cost % Comparison
For the Metal Fabrication subindustry, Min Aik Precision Industrial Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Precision Industrial Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Min Aik Precision Industrial Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Min Aik Precision Industrial Co's 5-Year Yield-on-Cost % falls into.
Min Aik Precision Industrial Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Min Aik Precision Industrial Co (TPE:4545) has a 5-Year Yield-on-Cost % of 1.70 as of Jul. 27, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Min Aik Precision Industrial Co and its competitors. This is 86% below median its historical median of 12.41. Over the past decade, Min Aik Precision Industrial Co's 5-Year Yield-on-Cost % has ranged from 1.70 to 110.58. According to the industry distribution chart, Min Aik Precision Industrial Co ranks #1035 out of 1922 companies in the Industrial Products industry, placing it in the top 53.9%.
Is Min Aik Precision Industrial Co's 5-Year Yield-on-Cost % too high?
Min Aik Precision Industrial Co's current 5-Year Yield-on-Cost % of 1.70 is 86% below median its 10-year median of 12.41. Over the past 10 years, this metric has ranged from a low of 1.70 to a high of 110.58. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.94. Min Aik Precision Industrial Co's value of 1.70 is 12.4% below this industry median. Based on the distribution chart, Min Aik Precision Industrial Co ranks #1035 out of 1922 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Min Aik Precision Industrial Co has a GF Score™ of 80/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Precision Industrial Co's 5-Year Yield-on-Cost % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Min Aik Precision Industrial Co ranks #1035 out of 1922 companies for 5-Year Yield-on-Cost %. This places Min Aik Precision Industrial Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.94. Min Aik Precision Industrial Co's value of 1.70 is 12.4% below this benchmark. Historically, Min Aik Precision Industrial Co's own 5-Year Yield-on-Cost % has ranged from 1.70 to 110.58 over the past decade. While the company's 10-year median is 12.41 vs. the industry median of 1.94, Min Aik Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,922 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Min Aik Precision Industrial Co's current 5-Year Yield-on-Cost % of 1.70 is 12.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Min Aik Precision Industrial Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Precision Industrial Co's current 5-Year Yield-on-Cost % is 1.70, which is 86% below median its own 10-year median of 12.41. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co (TPE:4545) is currently considered Fairly Valued. The stock's GF Value™ is NT$34.34, compared to a current price of NT$33.60 — trading 2.2% below its estimated fair value. The current 5-Year Yield-on-Cost % is 1.70, which is 86% below median its 10-year median of 12.41 and 12.4% below the Industrial Products industry median of 1.94. Min Aik Precision Industrial Co's overall GF Score™ is 80/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Min Aik Precision Industrial Co (TPE:4545), the current 5-Year Yield-on-Cost % is 1.70 as of Jul. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Precision Industrial Co (TPE:4545) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co stock appears to be undervalued.
The current stock price of NT$33.60 is trading 2.2% below its estimated GF Value™ of NT$34.34.
GuruFocus considers Min Aik Precision Industrial Co to be Fairly Valued.
Key valuation signals for TPE:4545:
5-Year Yield-on-Cost %: 1.70 (86% below median its 10-year median of 12.41)
GF Value™: NT$34.34 vs. price of NT$33.60 (2.2% below fair value)
Industry Position: 12.4% below the Industrial Products median (#1035 of 1922)
No single metric tells the full story. See the TPE:4545 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Precision Industrial Co Business Description
Min Aik Precision Industrial Co Ltd is engaged in the processing and manufacturing of electroplating of aluminum and copper products, precision stamping components, and electroless nickel plating. It has three reportable segments: the Company, MAPP, and AMO. The company which generates key revenue, engages mainly in the development, design, and manufacture of precise components. MAPP engages mainly in the development and manufacture of medical plastic injection and molding. AMO engages mainly in the development, manufacture, and selling of automatic machines. Geographically, it derives a majority of its revenue from Singapore and Malaysia and the rest from China, Taiwan, Ireland, Thailand, and other countries.
80GF Score
Get the complete analysis for TPE:4545
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4545 has been successfully added to your 
