Macpower CNC MachinesNSE:MACPOWER -2.12%98 Days Payable is 107.00 as of Mar. 2026, which is 9% below its 10-year median of 117.66. GuruFocus rates NSE:MACPOWER with a GF Score™ of 98/100 and a GF Value™ of ₹1,194.43 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 2,986 Industrial Products companies, Macpower CNC Machines ranks better than 68.69% on this metric.
The historical rank and industry rank for Macpower CNC Machines's Days Payable or its related term are showing as below:
NSE:MACPOWER'
s Days Payable Range Over the Past 10 Years
Min: 75.93 Med: 117.66 Max: 173.56
Current: 122.44
During the past 13 years, Macpower CNC Machines's highest Days Payable was 173.56. The lowest was 75.93. And the median was 117.66.
NSE:MACPOWER's Days Payable is ranked better than 68.69% of 2986
companies
in the Industrial Products industry
Industry Median: 78.065
vs NSE:MACPOWER: 122.44
Macpower CNC Machines Days Payable Historical Data
* Premium members only.
The historical data trend for Macpower CNC Machines's Days Payable can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MACPOWER vs GEV, ETN, PH: Days Payable Comparison
For the Specialty Industrial Machinery subindustry, Macpower CNC Machines's Days Payable, along with its competitors' market caps and Days Payable data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Macpower CNC Machines Days Payable vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Macpower CNC Machines's Days Payable distribution charts can be found below:
* The bar in red indicates where Macpower CNC Machines's Days Payable falls into.
Days Payable indicates the number of days that the account payable relative to cost of goods sold the company has. An increase of Days Payable may suggest that the company delays paying its suppliers.
Macpower CNC Machines's Days Payable for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Macpower CNC Machines (NSE:MACPOWER) has a Days Payable of 107.00 as of Mar. 2026. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Macpower CNC Machines and its competitors. This is near median its historical median of 117.66. Over the past decade, Macpower CNC Machines' Days Payable has ranged from 75.93 to 173.56. According to the industry distribution chart, Macpower CNC Machines ranks #935 out of 2986 companies in the Industrial Products industry, placing it in the top 31.3%.
Is Macpower CNC Machines' Days Payable too high?
Macpower CNC Machines' current Days Payable of 107.00 is near median its 10-year median of 117.66. Over the past 10 years, this metric has ranged from a low of 75.93 to a high of 173.56. The Industrial Products industry median Days Payable is 78.07. Macpower CNC Machines' value of 107.00 is 37.1% above this industry median. Based on the distribution chart, Macpower CNC Machines ranks #935 out of 2986 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Macpower CNC Machines has a GF Score™ of 98/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Macpower CNC Machines' Days Payable compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Macpower CNC Machines ranks #935 out of 2986 companies for Days Payable. This puts Macpower CNC Machines in the upper half of its industry. The industry median Days Payable is 78.07. Macpower CNC Machines' value of 107.00 is 37.1% above this benchmark. Historically, Macpower CNC Machines' own Days Payable has ranged from 75.93 to 173.56 over the past decade. While the company's 10-year median is 117.66 vs. the industry median of 78.07, Macpower CNC Machines has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Payable for an Industrial Products company?
The median Days Payable among Industrial Products companies is 78.07, based on 2,986 companies in the industry. Companies in the top quartile (top 25%) have a Days Payable significantly above this median, while those in the bottom quartile fall well below. However, Days Payable should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Macpower CNC Machines's current Days Payable of 107.00 is 37.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Payable mean?
A high Days Payable can signal that a stock is expensive relative to its fundamentals. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Macpower CNC Machines and its competitors. For the Industrial Products industry, the median Days Payable is 78.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Macpower CNC Machines's current Days Payable is 107.00, which is near median its own 10-year median of 117.66. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Macpower CNC Machines stock overvalued right now?
Based on GuruFocus' analysis, Macpower CNC Machines (NSE:MACPOWER) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹1,194.43, compared to a current price of ₹1,401.60 — trading 17.3% above its estimated fair value. The current Days Payable is 107.00, which is near median its 10-year median of 117.66 and 37.1% above the Industrial Products industry median of 78.07. Macpower CNC Machines' overall GF Score™ is 98/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Payable calculated?
Days Payable is calculated from a company's financial statements. For Macpower CNC Machines (NSE:MACPOWER), the current Days Payable is 107.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Macpower CNC Machines (NSE:MACPOWER) Overvalued in 2026?
Based on GuruFocus' analysis, Macpower CNC Machines stock appears to be overvalued.
The current stock price of ₹1,401.60 is trading 17.3% above its estimated GF Value™ of ₹1,194.43.
GuruFocus considers Macpower CNC Machines to be Modestly Overvalued.
Key valuation signals for NSE:MACPOWER:
Days Payable: 107.00 (near median its 10-year median of 117.66)
GF Value™: ₹1,194.43 vs. price of ₹1,401.60 (17.3% above fair value)
Industry Position: 37.1% above the Industrial Products median (#935 of 2986)
No single metric tells the full story. See the NSE:MACPOWER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Macpower CNC Machines Ltd is engaged in the manufacture of Computer numerical control (CNC) Turning Centers; Vertical Machining Centers, Horizontal Machining Centers, Cylindrical Grinder, Vertical Turret Lathe, Turn Mill Centers, Drill Tap Center, Twin Spindle VMC, and Multi-Tasking 5-axis along with sub-spindle. It also offers Robotic Automation integrated with CNC machines to cope with the demand for technology-driven machining excellence.
98GF Score
Get the complete analysis for NSE:MACPOWER
Days Payable is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MACPOWER has been successfully added to your 
