Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Macpower CNC MachinesNSE:MACPOWER -1.45%89 EV-to-EBIT is 34.74 as of Sep. 03, 2026, which is 83% above its 10-year median of 19.02. GuruFocus rates NSE:MACPOWER with a GF Score™ of 89/100 and a GF Value™ of ₹1,344.88 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 2,367 Industrial Products companies, Macpower CNC Machines ranks worse than 71.44% on this metric.
The historical rank and industry rank for Macpower CNC Machines's EV-to-EBIT or its related term are showing as below:
NSE:MACPOWER'
s EV-to-EBIT Range Over the Past 10 Years
Min: 2.16 Med: 19.02 Max: 56.54
Current: 34.74
During the past 13 years, the highest EV-to-EBIT of Macpower CNC Machines was 56.54. The lowest was 2.16. And the median was 19.02.
NSE:MACPOWER's EV-to-EBIT is ranked worse than 71.44% of 2367
companies
in the Industrial Products industry
Industry Median: 18.71
vs NSE:MACPOWER: 34.74
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
Macpower CNC Machines's Enterprise Value for the quarter that ended in Jun. 2026 was ₹13,474 Mil.
Macpower CNC Machines's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ₹541 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MACPOWER vs GEV, ETN, PH: EV-to-EBIT Comparison
For the Specialty Industrial Machinery subindustry, Macpower CNC Machines's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Macpower CNC Machines EV-to-EBIT vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Macpower CNC Machines's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where Macpower CNC Machines's EV-to-EBIT falls into.
Macpower CNC Machines's current Enterprise Value is ₹18,784 Mil.
Macpower CNC Machines's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ₹541 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Macpower CNC Machines (NSE:MACPOWER) has a EV-to-EBIT of 34.74 as of Sep. 03, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Macpower CNC Machines and its competitors. This is 83% above median its historical median of 19.02. Over the past decade, Macpower CNC Machines' EV-to-EBIT has ranged from 2.16 to 56.54. According to the industry distribution chart, Macpower CNC Machines ranks #1691 out of 2367 companies in the Industrial Products industry, placing it in the top 71.4%.
Is Macpower CNC Machines' EV-to-EBIT too high?
Macpower CNC Machines' current EV-to-EBIT of 34.74 is 83% above median its 10-year median of 19.02. Over the past 10 years, this metric has ranged from a low of 2.16 to a high of 56.54. The Industrial Products industry median EV-to-EBIT is 18.71. Macpower CNC Machines' value of 34.74 is 85.7% above this industry median. Based on the distribution chart, Macpower CNC Machines ranks #1691 out of 2367 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Macpower CNC Machines has a GF Score™ of 89/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Macpower CNC Machines' EV-to-EBIT compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Macpower CNC Machines ranks #1691 out of 2367 companies for EV-to-EBIT. This places Macpower CNC Machines in the lower half of its industry. The industry median EV-to-EBIT is 18.71. Macpower CNC Machines' value of 34.74 is 85.7% above this benchmark. Historically, Macpower CNC Machines' own EV-to-EBIT has ranged from 2.16 to 56.54 over the past decade. While the company's 10-year median is 19.02 vs. the industry median of 18.71, Macpower CNC Machines has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for an Industrial Products company?
The median EV-to-EBIT among Industrial Products companies is 18.71, based on 2,367 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Macpower CNC Machines's current EV-to-EBIT of 34.74 is 85.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Macpower CNC Machines and its competitors. For the Industrial Products industry, the median EV-to-EBIT is 18.71 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Macpower CNC Machines's current EV-to-EBIT is 34.74, which is 83% above median its own 10-year median of 19.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Macpower CNC Machines stock overvalued right now?
Based on GuruFocus' analysis, Macpower CNC Machines (NSE:MACPOWER) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹1,344.88, compared to a current price of ₹1,883.60 — trading 40.1% above its estimated fair value. The current EV-to-EBIT is 34.74, which is 83% above median its 10-year median of 19.02 and 85.7% above the Industrial Products industry median of 18.71. Macpower CNC Machines' overall GF Score™ is 89/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For Macpower CNC Machines (NSE:MACPOWER), the current EV-to-EBIT is 34.74 as of Sep. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Macpower CNC Machines (NSE:MACPOWER) Overvalued in 2026?
Based on GuruFocus' analysis, Macpower CNC Machines stock appears to be overvalued.
The current stock price of ₹1,883.60 is trading 40.1% above its estimated GF Value™ of ₹1,344.88.
GuruFocus considers Macpower CNC Machines to be Significantly Overvalued.
Key valuation signals for NSE:MACPOWER:
EV-to-EBIT: 34.74 (83% above median its 10-year median of 19.02)
GF Value™: ₹1,344.88 vs. price of ₹1,883.60 (40.1% above fair value)
Industry Position: 85.7% above the Industrial Products median (#1691 of 2367)
No single metric tells the full story. See the NSE:MACPOWER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Macpower CNC Machines Ltd is engaged in the manufacture of Computer numerical control (CNC) Turning Centers; Vertical Machining Centers, Horizontal Machining Centers, Cylindrical Grinder, Vertical Turret Lathe, Turn Mill Centers, Drill Tap Center, Twin Spindle VMC, and Multi-Tasking 5-axis along with sub-spindle. It also offers Robotic Automation integrated with CNC machines to cope with the demand for technology-driven machining excellence.
89GF Score
Get the complete analysis for NSE:MACPOWER
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MACPOWER has been successfully added to your 
