Macpower CNC MachinesNSE:MACPOWER -1.28%98 Net Margin % is 10.12% as of Mar. 2026, which is 51% above its 10-year median of 6.68. GuruFocus rates NSE:MACPOWER with a GF Score™ of 98/100 and a GF Value™ of ₹1,188.19 (Fairly Valued). The stock has 4 warning signs investors should review. Among 3,039 Industrial Products companies, Macpower CNC Machines ranks better than 75.68% on this metric.
The historical rank and industry rank for Macpower CNC Machines's Net Margin % or its related term are showing as below:
NSE:MACPOWER'
s Net Margin % Range Over the Past 10 Years
Min: 1.14 Med: 6.68 Max: 10.17
Current: 10.17
NSE:MACPOWER's Net Margin % is ranked better than 75.68% of 3039
companies
in the Industrial Products industry
Industry Median: 4.54
vs NSE:MACPOWER: 10.17
Macpower CNC Machines (NSE:MACPOWER) Net Margin % Explanation
Although Net Income and Earnings-per-Share (EPS) are the most widely used parameter in measuring a company's profitability and valuation, it is the least reliable. The reason is that reported earnings can be manipulated easily by adjusting any numbers such as Depreciation, Depletion and Amotorization and non-recurring items.
But the long term trend of the net margin is a good indicator of the competitiveness and health of the business.
Macpower CNC Machines Net Margin % Related Terms
Macpower CNC Machines Net Margin % Historical Data
* Premium members only.
The historical data trend for Macpower CNC Machines's Net Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MACPOWER vs GEV, ETN, PH: Net Margin % Comparison
For the Specialty Industrial Machinery subindustry, Macpower CNC Machines's Net Margin %, along with its competitors' market caps and Net Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Macpower CNC Machines Net Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Macpower CNC Machines's Net Margin % distribution charts can be found below:
* The bar in red indicates where Macpower CNC Machines's Net Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Macpower CNC Machines (NSE:MACPOWER) has a Net Margin % of 10.12% as of Mar. 2026. Net margin is the ratio of total net income to net sales. View historical data on Macpower CNC Machines and its competitors. This is 51% above median its historical median of 6.68. Over the past decade, Macpower CNC Machines' Net Margin % has ranged from 1.14 to 10.17. According to the industry distribution chart, Macpower CNC Machines ranks #739 out of 3039 companies in the Industrial Products industry, placing it in the top 24.3%.
Is Macpower CNC Machines' Net Margin % too high?
Macpower CNC Machines' current Net Margin % of 10.12% is 51% above median its 10-year median of 6.68. Over the past 10 years, this metric has ranged from a low of 1.14 to a high of 10.17. The Industrial Products industry median Net Margin % is 4.54. Macpower CNC Machines' value of 10.12% is 122.9% above this industry median. Based on the distribution chart, Macpower CNC Machines ranks #739 out of 3039 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Macpower CNC Machines has a GF Score™ of 98/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Macpower CNC Machines' Net Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Macpower CNC Machines ranks #739 out of 3039 companies for Net Margin %. This places Macpower CNC Machines in the top 24% of its industry — outperforming the majority of peers. The industry median Net Margin % is 4.54. Macpower CNC Machines' value of 10.12% is 122.9% above this benchmark. Historically, Macpower CNC Machines' own Net Margin % has ranged from 1.14 to 10.17 over the past decade. While the company's 10-year median is 6.68 vs. the industry median of 4.54, Macpower CNC Machines has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net Margin % for an Industrial Products company?
The median Net Margin % among Industrial Products companies is 4.54, based on 3,039 companies in the industry. Companies in the top quartile (top 25%) have a Net Margin % significantly above this median, while those in the bottom quartile fall well below. However, Net Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Macpower CNC Machines's current Net Margin % of 10.12% is 122.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net Margin % mean?
A high Net Margin % can signal that a stock is expensive relative to its fundamentals. Net margin is the ratio of total net income to net sales. View historical data on Macpower CNC Machines and its competitors. For the Industrial Products industry, the median Net Margin % is 4.54 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Macpower CNC Machines's current Net Margin % is 10.12%, which is 51% above median its own 10-year median of 6.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Macpower CNC Machines stock overvalued right now?
Based on GuruFocus' analysis, Macpower CNC Machines (NSE:MACPOWER) is currently considered Fairly Valued. The stock's GF Value™ is ₹1,188.19, compared to a current price of ₹1,154.30 — trading 2.9% below its estimated fair value. The current Net Margin % is 10.12%, which is 51% above median its 10-year median of 6.68 and 122.9% above the Industrial Products industry median of 4.54. Macpower CNC Machines' overall GF Score™ is 98/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net Margin % calculated?
Net Margin % is calculated from a company's financial statements. For Macpower CNC Machines (NSE:MACPOWER), the current Net Margin % is 10.12% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Macpower CNC Machines (NSE:MACPOWER) Overvalued in 2026?
Based on GuruFocus' analysis, Macpower CNC Machines stock appears to be undervalued.
The current stock price of ₹1,154.30 is trading 2.9% below its estimated GF Value™ of ₹1,188.19.
GuruFocus considers Macpower CNC Machines to be Fairly Valued.
Key valuation signals for NSE:MACPOWER:
Net Margin %: 10.12% (51% above median its 10-year median of 6.68)
GF Value™: ₹1,188.19 vs. price of ₹1,154.30 (2.9% below fair value)
Industry Position: 122.9% above the Industrial Products median (#739 of 3039)
No single metric tells the full story. See the NSE:MACPOWER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Macpower CNC Machines Ltd is engaged in the manufacture of Computer numerical control (CNC) Turning Centers; Vertical Machining Centers, Horizontal Machining Centers, Cylindrical Grinder, Vertical Turret Lathe, Turn Mill Centers, Drill Tap Center, Twin Spindle VMC, and Multi-Tasking 5-axis along with sub-spindle. It also offers Robotic Automation integrated with CNC machines to cope with the demand for technology-driven machining excellence.
98GF Score
Get the complete analysis for NSE:MACPOWER
Net Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MACPOWER has been successfully added to your 
