Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Macpower CNC MachinesNSE:MACPOWER -0.64%97 PB Ratio is 7.68 as of Jul. 25, 2026, which is 182% above its 10-year median of 2.72. GuruFocus rates NSE:MACPOWER with a GF Score™ of 97/100 and a GF Value™ of ₹1,204.66 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 2,982 Industrial Products companies, Macpower CNC Machines ranks worse than 90.24% on this metric.
Macpower CNC Machines Ltd stock PB Ratio (=7.58) is close to 1-year high of 8.12.
The historical rank and industry rank for Macpower CNC Machines's PB Ratio or its related term are showing as below:
NSE:MACPOWER'
s PB Ratio Range Over the Past 10 Years
Min: 0.49 Med: 2.72 Max: 12.22
Current: 7.68
During the past 13 years, Macpower CNC Machines's highest PB Ratio was 12.22. The lowest was 0.49. And the median was 2.72.
NSE:MACPOWER's PB Ratio is ranked worse than 90.24% of 2982
companies
in the Industrial Products industry
Industry Median: 2.12
vs NSE:MACPOWER: 7.68
During the past 12 months, Macpower CNC Machines's average Book Value Per Share Growth Rate was 22.70% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 22.00% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 19.40% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 42.20% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Macpower CNC Machines was 205.20% per year. The lowest was 9.70% per year. And the median was 19.00% per year.
Back to Basics: PB Ratio
Macpower CNC Machines (NSE:MACPOWER) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Macpower CNC Machines's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Macpower CNC Machines PB Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Macpower CNC Machines's PB Ratio distribution charts can be found below:
* The bar in red indicates where Macpower CNC Machines's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Macpower CNC Machines (NSE:MACPOWER) has a PB Ratio of 7.68 as of Jul. 25, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Macpower CNC Machines and its competitors. This is 182% above median its historical median of 2.72. Over the past decade, Macpower CNC Machines' PB Ratio has ranged from 0.49 to 12.22. According to the industry distribution chart, Macpower CNC Machines ranks #2691 out of 2982 companies in the Industrial Products industry, placing it in the top 90.2%.
Is Macpower CNC Machines' PB Ratio too high?
Macpower CNC Machines' current PB Ratio of 7.68 is 182% above median its 10-year median of 2.72. Over the past 10 years, this metric has ranged from a low of 0.49 to a high of 12.22. The Industrial Products industry median PB Ratio is 2.12. Macpower CNC Machines' value of 7.68 is 262.3% above this industry median. Based on the distribution chart, Macpower CNC Machines ranks #2691 out of 2982 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Macpower CNC Machines has a GF Score™ of 97/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Macpower CNC Machines' PB Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Macpower CNC Machines ranks #2691 out of 2982 companies for PB Ratio. This places Macpower CNC Machines in the lower half of its industry. The industry median PB Ratio is 2.12. Macpower CNC Machines' value of 7.68 is 262.3% above this benchmark. Historically, Macpower CNC Machines' own PB Ratio has ranged from 0.49 to 12.22 over the past decade. While the company's 10-year median is 2.72 vs. the industry median of 2.12, Macpower CNC Machines has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for an Industrial Products company?
The median PB Ratio among Industrial Products companies is 2.12, based on 2,982 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Macpower CNC Machines's current PB Ratio of 7.68 is 262.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Macpower CNC Machines and its competitors. For the Industrial Products industry, the median PB Ratio is 2.12 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Macpower CNC Machines's current PB Ratio is 7.68, which is 182% above median its own 10-year median of 2.72. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Macpower CNC Machines stock overvalued right now?
Based on GuruFocus' analysis, Macpower CNC Machines (NSE:MACPOWER) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹1,204.66, compared to a current price of ₹1,344.50 — trading 11.6% above its estimated fair value. The current PB Ratio is 7.68, which is 182% above median its 10-year median of 2.72 and 262.3% above the Industrial Products industry median of 2.12. Macpower CNC Machines' overall GF Score™ is 97/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Macpower CNC Machines (NSE:MACPOWER), the current PB Ratio is 7.68 as of Jul. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Macpower CNC Machines (NSE:MACPOWER) Overvalued in 2026?
Based on GuruFocus' analysis, Macpower CNC Machines stock appears to be overvalued.
The current stock price of ₹1,344.50 is trading 11.6% above its estimated GF Value™ of ₹1,204.66.
GuruFocus considers Macpower CNC Machines to be Modestly Overvalued.
Key valuation signals for NSE:MACPOWER:
PB Ratio: 7.68 (182% above median its 10-year median of 2.72)
GF Value™: ₹1,204.66 vs. price of ₹1,344.50 (11.6% above fair value)
Industry Position: 262.3% above the Industrial Products median (#2691 of 2982)
No single metric tells the full story. See the NSE:MACPOWER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Macpower CNC Machines Ltd is engaged in the manufacture of Computer numerical control (CNC) Turning Centers; Vertical Machining Centers, Horizontal Machining Centers, Cylindrical Grinder, Vertical Turret Lathe, Turn Mill Centers, Drill Tap Center, Twin Spindle VMC, and Multi-Tasking 5-axis along with sub-spindle. It also offers Robotic Automation integrated with CNC machines to cope with the demand for technology-driven machining excellence.
97GF Score
Get the complete analysis for NSE:MACPOWER
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MACPOWER has been successfully added to your 
