Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Graham Number is a figure that measures a stock's fundamental value by taking into account the company's earnings per share and book value per share. The Graham number is the upper bound of the price range that a defensive investor should pay for the stock. According to the theory, any stock price below the Graham number is considered undervalued, and thus worth investing in.
As of today (2026-08-29), the stock price of Macpower CNC Machines is ₹2007.10. Macpower CNC Machines's graham number for the quarter that ended in Mar. 2026 was ₹363.43. Therefore, Macpower CNC Machines's Price to Graham Number ratio for today is 5.52.
The historical rank and industry rank for Macpower CNC Machines's Graham Number or its related term are showing as below:
NSE:MACPOWER'
s Price-to-Graham-Number Range Over the Past 10 Years
Min: 0.54 Med: 1.47 Max: 5.52
Current: 5.52
During the past 13 years, the highest Price to Graham Number ratio of Macpower CNC Machines was 5.52. The lowest was 0.54. And the median was 1.47.
NSE:MACPOWER's Price-to-Graham-Number is ranked worse than 86.13% of 2242
companies
in the Industrial Products industry
Industry Median: 1.755
vs NSE:MACPOWER: 5.52
Graham Number is a combination of asset valuation and earnings power valuation. It is a very conservative way of valuing a stock.
Macpower CNC Machines (NSE:MACPOWER) Graham Number Explanation
Ben Graham actually did not publish a formula like this. But he wrote in The Intelligent Investor (1948 version) regarding to the criteria for purchases:
Current price should not be more than 15 times average earnings of the past three years.
Current price should not be more than 1.5 times the book value last reported. However, a multiplier of earnings below 15 could justify a correspondingly higher multiplier of assets. As a rule of thumb we suggest that the product of the multiplier times the ratio of price to book value should not exceed 22.5. (This figure corresponds to 15 times earnings and 1.5 times book value. It would admit an issue selling at only 9 times earnings and 2.5 times asset value, etc.)
Unlike valuation methods such as DCF or Discounted Earnings, the Graham number does not take growth into the valuation. Unlike the valuation methods based on book value alone, it takes into account the earnings power. Therefore, the Graham Number is a combination of asset valuation and earnings power valuation.
In general, the Graham number is a very conservative way of valuing a stock. It cannot be applied to companies with negative book values.
Macpower CNC Machines's Price to Graham number Ratio for today is calculated as
Price to Graham number
=
Share Price (Today)
/
Graham number (Q: Mar. 2026 )
=
2007.10
/
363.43
=
5.52
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Please keep these in mind:
1. Graham Number does not take growth into account. Therefore it underestimates the values of the companies that have good earnings growth. We feel that if the earnings per share grows more than 10% a year, Graham Number underestimates the value.
2. Graham Number punishes the companies that have temporarily low earnings. Therefore, an average of earnings makes more sense in the calculation of Graham Number.
3. Graham Numbers underestimates companies that are light with book.
Macpower CNC Machines Graham Number Related Terms
Macpower CNC Machines Graham Number Historical Data
* Premium members only.
The historical data trend for Macpower CNC Machines's Graham Number can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MACPOWER vs GEV, ETN, PH: Graham Number Comparison
For the Specialty Industrial Machinery subindustry, Macpower CNC Machines's Price-to-Graham-Number, along with its competitors' market caps and Price-to-Graham-Number data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Macpower CNC Machines Price-to-Graham-Number vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Macpower CNC Machines's Price-to-Graham-Number distribution charts can be found below:
* The bar in red indicates where Macpower CNC Machines's Price-to-Graham-Number falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Macpower CNC Machines (NSE:MACPOWER) has a Graham Number of ₹363.43 as of Mar. 2026. The Graham Number values a company based on its per-share earnings and book value. View historical data on Macpower CNC Machines and its competitors. According to the industry distribution chart, Macpower CNC Machines ranks #1931 out of 2242 companies in the Industrial Products industry, placing it in the top 86.1%.
Is Macpower CNC Machines' Graham Number too high?
Macpower CNC Machines' current Graham Number is ₹363.43. Based on the distribution chart, Macpower CNC Machines ranks #1931 out of 2242 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Macpower CNC Machines has a GF Score™ of 83/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Macpower CNC Machines' Graham Number compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Macpower CNC Machines ranks #1931 out of 2242 companies for Graham Number. This places Macpower CNC Machines in the lower half of its industry. The industry median Graham Number is 1.76. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Graham Number for an Industrial Products company?
The median Graham Number among Industrial Products companies is 1.76, based on 2,242 companies in the industry. Companies in the top quartile (top 25%) have a Graham Number significantly above this median, while those in the bottom quartile fall well below. However, Graham Number should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Graham Number mean?
A high Graham Number can signal that a stock is expensive relative to its fundamentals. The Graham Number values a company based on its per-share earnings and book value. View historical data on Macpower CNC Machines and its competitors. For the Industrial Products industry, the median Graham Number is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Macpower CNC Machines's current Graham Number is ₹363.43. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Macpower CNC Machines stock overvalued right now?
Based on GuruFocus' analysis, Macpower CNC Machines (NSE:MACPOWER) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹1,224.53, compared to a current price of ₹2,007.10 — trading 63.9% above its estimated fair value. The current Graham Number is ₹363.43. Macpower CNC Machines' overall GF Score™ is 83/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Graham Number calculated?
Graham Number is calculated from a company's financial statements. For Macpower CNC Machines (NSE:MACPOWER), the current Graham Number is ₹363.43 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Macpower CNC Machines (NSE:MACPOWER) Overvalued in 2026?
Based on GuruFocus' analysis, Macpower CNC Machines stock appears to be overvalued.
The current stock price of ₹2,007.10 is trading 63.9% above its estimated GF Value™ of ₹1,224.53.
GuruFocus considers Macpower CNC Machines to be Significantly Overvalued.
Key valuation signals for NSE:MACPOWER:
Graham Number: ₹363.43
GF Value™: ₹1,224.53 vs. price of ₹2,007.10 (63.9% above fair value)
No single metric tells the full story. See the NSE:MACPOWER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Macpower CNC Machines Ltd is engaged in the manufacture of Computer numerical control (CNC) Turning Centers; Vertical Machining Centers, Horizontal Machining Centers, Cylindrical Grinder, Vertical Turret Lathe, Turn Mill Centers, Drill Tap Center, Twin Spindle VMC, and Multi-Tasking 5-axis along with sub-spindle. It also offers Robotic Automation integrated with CNC machines to cope with the demand for technology-driven machining excellence.
83GF Score
Get the complete analysis for NSE:MACPOWER
Graham Number is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MACPOWER has been successfully added to your 
