Macpower CNC Machines (NSE:MACPOWER) Total Current Liabilities: ₹869 Mil (As of Mar. 2026)


NSE:MACPOWER Macpower CNC Machines Ltd NSE:MACPOWER
98 GF Score
Price ₹1,371.70
GF Value ₹1,197.84
Valuation Modestly Overvalued
! 6 Warning Signs
View Full Analysis

What is Macpower CNC Machines Total Current Liabilities?

Macpower CNC Machines NSE:MACPOWER -0.04% 98 Total Current Liabilities is ₹869 Mil as of Mar. 2026. GuruFocus rates NSE:MACPOWER with a GF Score™ of 98/100 and a GF Value™ of ₹1,197.84 (Modestly Overvalued). The stock has 6 warning signs investors should review.

Total current liabilities includes Accounts Payable & Accrued Expense, Short-Term Debt & Capital Lease Obligation, Other Current Liabilities, and Current Deferred Liabilities. Macpower CNC Machines's total current liabilities for the quarter that ended in Mar. 2026 was ₹869

Be Aware

Stay away from companies that roll over the debt e.g. Bear Stearns

When investing in financial institutions, Buffett shies from those who are bigger borrowers of short term than long term debt.

His favorite Wells Fargo has 57 cents short term debt for every dollar of long term.

Aggressive banks (like Bank of America) has $2.09 short term for every dollar long term

Macpower CNC Machines Total Current Liabilities Related Terms

Macpower CNC Machines Total Current Liabilities Historical Data

* Premium members only.

The historical data trend for Macpower CNC Machines's Total Current Liabilities can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Macpower CNC Machines Total Current Liabilities Chart

Macpower CNC Machines Annual Data
Trend Mar17 Mar18 Mar19 Mar20 Mar21 Mar22 Mar23 Mar24 Mar25 Mar26
Total Current Liabilities
Get a 7-Day Free Trial Premium Member Only Premium Member Only 560.90 402.14 578.05 698.87 869.19

Macpower CNC Machines Quarterly Data
Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25 Mar26
Total Current Liabilities Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 698.87 0.00 945.57 0.00 869.19
NSE:MACPOWER
98GF Score
Macpower CNC Machines Ltd NSE:MACPOWER
Total Current Liabilities is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Macpower CNC Machines Total Current Liabilities Calculation

Total Current Liabilities is the total amount of liabilities that the company needs to pay over the next 12 months.

Macpower CNC Machines's Total Current Liabilities for the fiscal year that ended in Mar. 2026 is calculated as

Total Current Liabilities=Accounts Payable & Accrued Expense+Short-Term Debt & Capital Lease Obligation
=717.503+2.788
+Other Current Liabilities+Current Deferred Liabilities
=148.898+0
=869

Macpower CNC Machines's Total Current Liabilities for the quarter that ended in Mar. 2026 is calculated as

Total Current Liabilities=Accounts Payable & Accrued Expense+Short-Term Debt & Capital Lease Obligation
=717.503+2.788
+Other Current Liabilities+Current Deferred Liabilities
=148.898+0
=869

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

The increase of Total Current Liabilities of a company is not necessarily a bad thing. This may conserve the company's cash and contribute positively to cash flow.

Total Current Liabilities is linked to Total Current Assets through the Current Ratio and Working Capital. The Current Ratio is equal to dividing total current assets by total current liabilities. It is frequently used as an indicator of a company's liquidity, its ability to meet short-term obligations. Net working capital is calculated as Total Current Assets minus Total Current Liabilities.

What does a Total Current Liabilities of ₹869 Mil mean?
Macpower CNC Machines (NSE:MACPOWER) has a Total Current Liabilities of ₹869 Mil as of Mar. 2026. The total amount of liabilities with maturity less than one year as recorded on a company's balance sheet. View historical data for Macpower CNC Machines and its competitors.
Is Macpower CNC Machines' Total Current Liabilities too high?
Macpower CNC Machines' current Total Current Liabilities is ₹869 Mil. Overall, Macpower CNC Machines has a GF Score™ of 98/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Macpower CNC Machines' Total Current Liabilities compare to GEV and ETN?
Macpower CNC Machines' Total Current Liabilities of ₹869 Mil can be compared against companies in the Industrial Products industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Total Current Liabilities for an Industrial Products company?
A good Total Current Liabilities depends on the Industrial Products industry context. However, Total Current Liabilities should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Total Current Liabilities mean?
A high Total Current Liabilities can signal that a stock is expensive relative to its fundamentals. The total amount of liabilities with maturity less than one year as recorded on a company's balance sheet. View historical data for Macpower CNC Machines and its competitors. Macpower CNC Machines's current Total Current Liabilities is ₹869 Mil. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Macpower CNC Machines stock overvalued right now?
Based on GuruFocus' analysis, Macpower CNC Machines (NSE:MACPOWER) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹1,197.84, compared to a current price of ₹1,371.70 — trading 14.5% above its estimated fair value. The current Total Current Liabilities is ₹869 Mil. Macpower CNC Machines' overall GF Score™ is 98/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Total Current Liabilities calculated?
Total Current Liabilities is calculated from a company's financial statements. For Macpower CNC Machines (NSE:MACPOWER), the current Total Current Liabilities is ₹869 Mil as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Macpower CNC Machines (NSE:MACPOWER) Overvalued in 2026?

Based on GuruFocus' analysis, Macpower CNC Machines stock appears to be overvalued. The current stock price of ₹1,371.70 is trading 14.5% above its estimated GF Value™ of ₹1,197.84. GuruFocus considers Macpower CNC Machines to be Modestly Overvalued.

Key valuation signals for NSE:MACPOWER:

  • Total Current Liabilities: ₹869 Mil
  • GF Value™: ₹1,197.84 vs. price of ₹1,371.70 (14.5% above fair value)
  • GF Score™: 98/100 with 6 warning signs

No single metric tells the full story. See the NSE:MACPOWER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

Macpower CNC Machines Business Description

Address Near Krnati Gate, Plot No. 2234, GIDC Metoda, Talu-Lodhika District, Rajkot, GJ, IND, 360021
Macpower CNC Machines Ltd is engaged in the manufacture of Computer numerical control (CNC) Turning Centers; Vertical Machining Centers, Horizontal Machining Centers, Cylindrical Grinder, Vertical Turret Lathe, Turn Mill Centers, Drill Tap Center, Twin Spindle VMC, and Multi-Tasking 5-axis along with sub-spindle. It also offers Robotic Automation integrated with CNC machines to cope with the demand for technology-driven machining excellence.
98GF Score

Get the complete analysis for NSE:MACPOWER

Total Current Liabilities is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

₹1,371.70
Price
₹1,197.84
GF Value