Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Masterplast Nyrt's Debt-to-Equity or its related term are showing as below:
BUD:MASTERPLAST'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.71 Med: 1.08 Max: 1.52
Current: 1.08
During the past 13 years, the highest Debt-to-Equity Ratio of Masterplast Nyrt was 1.52. The lowest was 0.71. And the median was 1.08.
BUD:MASTERPLAST's Debt-to-Equity is ranked worse than 78.34% of 1607
companies
in the Construction industry
Industry Median: 0.41
vs BUD:MASTERPLAST: 1.08
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Masterplast Nyrt Debt-to-Equity Related Terms
Masterplast Nyrt Debt-to-Equity Historical Data
* Premium members only.
The historical data trend for Masterplast Nyrt's Debt-to-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BUD:MASTERPLAST vs TT, JCI, CARR: Debt-to-Equity Comparison
For the Building Products & Equipment subindustry, Masterplast Nyrt's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Masterplast Nyrt Debt-to-Equity vs Construction Industry
For the Construction industry and Industrials sector, Masterplast Nyrt's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Masterplast Nyrt's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Masterplast Nyrt (BUD:MASTERPLAST) has a Debt-to-Equity of 1.08 as of Mar. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Masterplast Nyrt and its competitors. This is near median its historical median of 1.08. Over the past decade, Masterplast Nyrt's Debt-to-Equity has ranged from 0.71 to 1.52. According to the industry distribution chart, Masterplast Nyrt ranks #1259 out of 1607 companies in the Construction industry, placing it in the top 78.3%.
Is Masterplast Nyrt's Debt-to-Equity too high?
Masterplast Nyrt's current Debt-to-Equity of 1.08 is near median its 10-year median of 1.08. Over the past 10 years, this metric has ranged from a low of 0.71 to a high of 1.52. The Construction industry median Debt-to-Equity is 0.41. Masterplast Nyrt's value of 1.08 is 163.4% above this industry median. Based on the distribution chart, Masterplast Nyrt ranks #1259 out of 1607 companies in the Construction industry, which is in the bottom quartile relative to peers. Overall, Masterplast Nyrt has a GF Score™ of 45/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Masterplast Nyrt's Debt-to-Equity compare to TT and JCI?
According to the Construction industry distribution chart, Masterplast Nyrt ranks #1259 out of 1607 companies for Debt-to-Equity. This places Masterplast Nyrt in the lower half of its industry. The industry median Debt-to-Equity is 0.41. Masterplast Nyrt's value of 1.08 is 163.4% above this benchmark. Historically, Masterplast Nyrt's own Debt-to-Equity has ranged from 0.71 to 1.52 over the past decade. While the company's 10-year median is 1.08 vs. the industry median of 0.41, Masterplast Nyrt has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for a Construction company?
The median Debt-to-Equity among Construction companies is 0.41, based on 1,607 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Masterplast Nyrt's current Debt-to-Equity of 1.08 is 163.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Masterplast Nyrt and its competitors. For the Construction industry, the median Debt-to-Equity is 0.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Masterplast Nyrt's current Debt-to-Equity is 1.08, which is near median its own 10-year median of 1.08. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Masterplast Nyrt stock overvalued right now?
Based on GuruFocus' analysis, Masterplast Nyrt (BUD:MASTERPLAST) is currently considered Modestly Undervalued. The stock's GF Value™ is Ft3,524.35, compared to a current price of Ft2,770.00 — trading 21.4% below its estimated fair value. The current Debt-to-Equity is 1.08, which is near median its 10-year median of 1.08 and 163.4% above the Construction industry median of 0.41. Masterplast Nyrt's overall GF Score™ is 45/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Masterplast Nyrt (BUD:MASTERPLAST), the current Debt-to-Equity is 1.08 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Masterplast Nyrt (BUD:MASTERPLAST) Overvalued in 2026?
Based on GuruFocus' analysis, Masterplast Nyrt stock appears to be undervalued.
The current stock price of Ft2,770.00 is trading 21.4% below its estimated GF Value™ of Ft3,524.35.
GuruFocus considers Masterplast Nyrt to be Modestly Undervalued.
Key valuation signals for BUD:MASTERPLAST:
Debt-to-Equity: 1.08 (near median its 10-year median of 1.08)
GF Value™: Ft3,524.35 vs. price of Ft2,770.00 (21.4% below fair value)
Industry Position: 163.4% above the Construction median (#1259 of 1607)
No single metric tells the full story. See the BUD:MASTERPLAST stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Masterplast Nyrt is engaged in the production and distribution of insulation building materials, pitched roof insulation and dry construction system components. The company divides its activities into two segments: Sales and Manufacturing. It generates maximum revenue from the Sales segment. The Manufacturing segment supplies glass fibre, roofing membrane, plasterboard profiles, mesh edge protectors, isofoam, EPS, XPS and healthcare textiles to the Sales segment. Its product categories include Facade thermal insulation system, Roofing membranes and roof components, Dry construction systems, Thermal, acoustic and waterproofing materials, Construction accessories, and industrial applications.
45GF Score
Get the complete analysis for BUD:MASTERPLAST
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BUD:MASTERPLAST has been successfully added to your 
