ERELY'
s EV-to-FCF Range Over the Past 10 Years
Min: -69.38 Med: 7.11 Max: 187
Current: 8.85
During the past 13 years, the highest EV-to-FCF of Eregli Demir Ve Celik Fabrikalari TAS was 187.00. The lowest was -69.38. And the median was 7.11.
ERELY's EV-to-FCF is ranked better than 69.27% of 358
companies
in the Steel industry
Industry Median: 16.7
vs ERELY: 8.85
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Eregli Demir Ve Celik Fabrikalari TAS (OTCPK:ERELY) EV-to-FCF Explanation
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Eregli Demir Ve Celik Fabrikalari TAS's PE Ratio (TTM) for today is calculated as:
Eregli Demir Ve Celik Fabrikalari TAS's share price for today is $9.00.
Eregli Demir Ve Celik Fabrikalari TAS's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Mar. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was $0.018.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enterprise Value is used because it is a more complete measure in reflecting how much an investor pays when buying a company. Free Cash Flow is an important financial metric because it represents the actual amount of cash at a company's disposal. Companies with a low EV-to-FCF ratio, combined with a strong balance sheet are generally considered as undervalued.
Eregli Demir Ve Celik Fabrikalari TAS EV-to-FCF Related Terms
Eregli Demir Ve Celik Fabrikalari TAS EV-to-FCF Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS EV-to-FCF Chart
For the Steel subindustry, Eregli Demir Ve Celik Fabrikalari TAS's EV-to-FCF, along with its competitors' market caps and EV-to-FCF data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eregli Demir Ve Celik Fabrikalari TAS EV-to-FCF vs Steel Industry
Eregli Demir Ve Celik Fabrikalari TAS's current Enterprise Value is $6,934 Mil.
Eregli Demir Ve Celik Fabrikalari TAS's Free Cash Flow for the trailing twelve months (TTM) ended in Mar. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was $815 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS (ERELY) has a EV-to-FCF of 8.51 as of Jun. 27, 2026. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. This is 20% above median its historical median of 7.11. According to the industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #110 out of 358 companies in the Steel industry, placing it in the top 30.7%.
Is Eregli Demir Ve Celik Fabrikalari TAS's EV-to-FCF too high?
Eregli Demir Ve Celik Fabrikalari TAS's current EV-to-FCF of 8.51 is 20% above median its 10-year median of 7.11. The Steel industry median EV-to-FCF is 16.70. Eregli Demir Ve Celik Fabrikalari TAS's value of 8.51 is 49% below this industry median. Based on the distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #110 out of 358 companies in the Steel industry, which is above the industry midpoint. Overall, Eregli Demir Ve Celik Fabrikalari TAS has a GF Score™ of 92/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eregli Demir Ve Celik Fabrikalari TAS's EV-to-FCF compare to NUE and STLD?
According to the Steel industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #110 out of 358 companies for EV-to-FCF. This puts Eregli Demir Ve Celik Fabrikalari TAS in the upper half of its industry. The industry median EV-to-FCF is 16.70. Eregli Demir Ve Celik Fabrikalari TAS's value of 8.51 is 49% below this benchmark. While the company's 10-year median is 7.11 vs. the industry median of 16.70, Eregli Demir Ve Celik Fabrikalari TAS has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-FCF for a Steel company?
The median EV-to-FCF among Steel companies is 16.70, based on 358 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-FCF significantly above this median, while those in the bottom quartile fall well below. However, EV-to-FCF should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eregli Demir Ve Celik Fabrikalari TAS's current EV-to-FCF of 8.51 is 49% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-FCF mean?
A high EV-to-FCF can signal that a stock is expensive relative to its fundamentals. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. For the Steel industry, the median EV-to-FCF is 16.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eregli Demir Ve Celik Fabrikalari TAS's current EV-to-FCF is 8.51, which is 20% above median its own 10-year median of 7.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eregli Demir Ve Celik Fabrikalari TAS stock overvalued right now?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS (ERELY) is currently considered Significantly Overvalued. The stock's GF Value™ is $6.75, compared to a current price of $9.00 — trading 33.3% above its estimated fair value. The current EV-to-FCF is 8.51, which is 20% above median its 10-year median of 7.11 and 49% below the Steel industry median of 16.70. Eregli Demir Ve Celik Fabrikalari TAS's overall GF Score™ is 92/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-FCF calculated?
EV-to-FCF is calculated from a company's financial statements. For Eregli Demir Ve Celik Fabrikalari TAS (ERELY), the current EV-to-FCF is 8.51 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eregli Demir Ve Celik Fabrikalari TAS (ERELY) Overvalued in 2026?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS stock appears to be overvalued.
The current stock price of $9.00 is trading 33.3% above its estimated GF Value™ of $6.75.
GuruFocus considers Eregli Demir Ve Celik Fabrikalari TAS to be Significantly Overvalued.
Key valuation signals for ERELY:
EV-to-FCF: 8.51 (20% above median its 10-year median of 7.11)
GF Value™: $6.75 vs. price of $9.00 (33.3% above fair value)
Industry Position: 49% below the Steel median (#110 of 358)
No single metric tells the full story. See the ERELY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eregli Demir Ve Celik Fabrikalari TAS Business Description
Eregli Demir Ve Celik Fabrikalari TAS is a Turkey-based company engaged in production of flat steel, long steel and other steel products. The company also provides engineering and project management services, as well as port services. As well, the company owns an iron ore mining arm. The company's steel products include hot-rolled product, cold-rolled product, galvanized products, metal packaging steel, billet, wire-rod, etc. These products are used in the automotive sector, manufacturing industry, projected works, consumer products, packaging industries and others. Most of the company's revenue comes from the Turkish domestic market.
92GF Score
Get the complete analysis for ERELY
EV-to-FCF is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ERELY has been successfully added to your 
