ERELY'
s Pretax Margin % Range Over the Past 10 Years
Min: 1.76 Med: 18.05 Max: 35.05
Current: 1.93
ERELY's Pretax Margin % is ranked worse than 55.61% of 615
companies
in the Steel industry
Industry Median: 2.56
vs ERELY: 1.93
Eregli Demir Ve Celik Fabrikalari TAS (OTCPK:ERELY) Pretax Margin % Explanation
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Eregli Demir Ve Celik Fabrikalari TAS Pretax Margin % Related Terms
Eregli Demir Ve Celik Fabrikalari TAS Pretax Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS Pretax Margin % Chart
ERELY vs NUE, STLD, RS: Pretax Margin % Comparison
For the Steel subindustry, Eregli Demir Ve Celik Fabrikalari TAS's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eregli Demir Ve Celik Fabrikalari TAS Pretax Margin % vs Steel Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS (ERELY) has a Pretax Margin % of 1.50% as of Mar. 2026. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. This is 92% below median its historical median of 18.05. Over the past decade, Eregli Demir Ve Celik Fabrikalari TAS's Pretax Margin % has ranged from 1.76 to 35.05. According to the industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #342 out of 615 companies in the Steel industry, placing it in the top 55.6%.
Is Eregli Demir Ve Celik Fabrikalari TAS's Pretax Margin % too high?
Eregli Demir Ve Celik Fabrikalari TAS's current Pretax Margin % of 1.50% is 92% below median its 10-year median of 18.05. Over the past 10 years, this metric has ranged from a low of 1.76 to a high of 35.05. The Steel industry median Pretax Margin % is 2.56. Eregli Demir Ve Celik Fabrikalari TAS's value of 1.50% is 41.4% below this industry median. Based on the distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #342 out of 615 companies in the Steel industry, which is below the industry midpoint. Overall, Eregli Demir Ve Celik Fabrikalari TAS has a GF Score™ of 92/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eregli Demir Ve Celik Fabrikalari TAS's Pretax Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #342 out of 615 companies for Pretax Margin %. This places Eregli Demir Ve Celik Fabrikalari TAS in the lower half of its industry. The industry median Pretax Margin % is 2.56. Eregli Demir Ve Celik Fabrikalari TAS's value of 1.50% is 41.4% below this benchmark. Historically, Eregli Demir Ve Celik Fabrikalari TAS's own Pretax Margin % has ranged from 1.76 to 35.05 over the past decade. While the company's 10-year median is 18.05 vs. the industry median of 2.56, Eregli Demir Ve Celik Fabrikalari TAS has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for a Steel company?
The median Pretax Margin % among Steel companies is 2.56, based on 615 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eregli Demir Ve Celik Fabrikalari TAS's current Pretax Margin % of 1.50% is 41.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. For the Steel industry, the median Pretax Margin % is 2.56 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eregli Demir Ve Celik Fabrikalari TAS's current Pretax Margin % is 1.50%, which is 92% below median its own 10-year median of 18.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eregli Demir Ve Celik Fabrikalari TAS stock overvalued right now?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS (ERELY) is currently considered Significantly Overvalued. The stock's GF Value™ is $6.75, compared to a current price of $9.00 — trading 33.3% above its estimated fair value. The current Pretax Margin % is 1.50%, which is 92% below median its 10-year median of 18.05 and 41.4% below the Steel industry median of 2.56. Eregli Demir Ve Celik Fabrikalari TAS's overall GF Score™ is 92/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Eregli Demir Ve Celik Fabrikalari TAS (ERELY), the current Pretax Margin % is 1.50% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eregli Demir Ve Celik Fabrikalari TAS (ERELY) Overvalued in 2026?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS stock appears to be overvalued.
The current stock price of $9.00 is trading 33.3% above its estimated GF Value™ of $6.75.
GuruFocus considers Eregli Demir Ve Celik Fabrikalari TAS to be Significantly Overvalued.
Key valuation signals for ERELY:
Pretax Margin %: 1.50% (92% below median its 10-year median of 18.05)
GF Value™: $6.75 vs. price of $9.00 (33.3% above fair value)
Industry Position: 41.4% below the Steel median (#342 of 615)
No single metric tells the full story. See the ERELY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eregli Demir Ve Celik Fabrikalari TAS Business Description
Eregli Demir Ve Celik Fabrikalari TAS is a Turkey-based company engaged in production of flat steel, long steel and other steel products. The company also provides engineering and project management services, as well as port services. As well, the company owns an iron ore mining arm. The company's steel products include hot-rolled product, cold-rolled product, galvanized products, metal packaging steel, billet, wire-rod, etc. These products are used in the automotive sector, manufacturing industry, projected works, consumer products, packaging industries and others. Most of the company's revenue comes from the Turkish domestic market.
92GF Score
Get the complete analysis for ERELY
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ERELY has been successfully added to your 
