The historical rank and industry rank for Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset or its related term are showing as below:
ERELY'
s Return-on-Tangible-Asset Range Over the Past 10 Years
Min: 0.09 Med: 7.4 Max: 17.24
Current: 0.09
During the past 13 years, Eregli Demir Ve Celik Fabrikalari TAS's highest Return-on-Tangible-Asset was 17.24%. The lowest was 0.09%. And the median was 7.40%.
ERELY's Return-on-Tangible-Asset is ranked worse than 66.98% of 633
companies
in the Steel industry
Industry Median: 2
vs ERELY: 0.09
Eregli Demir Ve Celik Fabrikalari TAS (OTCPK:ERELY) Return-on-Tangible-Asset Explanation
Return-on-Tangible-Asset measures the rate of return on the average total tangible assets (total assets minus intangible assets). Tangible means physical in nature. Intangible Assets are assets that are not physical in nature, and typically "derive their value from legal or intellectual rights." Return-on-Tangible-Asset measures a firm's efficiency at generating profits from its tangible assets. It shows how well a company uses what it has to generate earnings. Return-on-Tangible-Assets can vary drastically across industries. Therefore, Return-on-Tangible-Asset should not be used to compare companies in different industries.
Be Aware
Like ROE and ROA, Return-on-Tangible-Asset is calculated with only 12 months data. Fluctuations in the companys earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. Return-on-Tangible-Asset can be affected by events such as stock buyback or issuance, and by a companys tax rate and its interest payment. Return-on-Tangible-Asset may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high Return-on-Tangible-Asset may indicate vulnerability in the durability of the competitive advantage.
Eregli Demir Ve Celik Fabrikalari TAS Return-on-Tangible-Asset Related Terms
Eregli Demir Ve Celik Fabrikalari TAS Return-on-Tangible-Asset Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS Return-on-Tangible-Asset Chart
ERELY vs NUE, STLD, RS: Return-on-Tangible-Asset Comparison
For the Steel subindustry, Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset, along with its competitors' market caps and Return-on-Tangible-Asset data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eregli Demir Ve Celik Fabrikalari TAS Return-on-Tangible-Asset vs Steel Industry
For the Steel industry and Basic Materials sector, Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset distribution charts can be found below:
* The bar in red indicates where Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Return-on-Tangible-Asset, the net income of the last fiscal year and the average total tangible assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Mar. 2026) net income data.
What does a Return-on-Tangible-Asset of 0.27% mean?
Eregli Demir Ve Celik Fabrikalari TAS (ERELY) has a Return-on-Tangible-Asset of 0.27% as of Mar. 2026. Return on tangible assets is the ratio of current-period net income to average two-period tangible assets. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. This is 96% below median its historical median of 7.40. Over the past decade, Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset has ranged from 0.09 to 17.24. According to the industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #424 out of 633 companies in the Steel industry, placing it in the top 67%.
Is Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset too high?
Eregli Demir Ve Celik Fabrikalari TAS's current Return-on-Tangible-Asset of 0.27% is 96% below median its 10-year median of 7.40. Over the past 10 years, this metric has ranged from a low of 0.09 to a high of 17.24. The Steel industry median Return-on-Tangible-Asset is 2.00. Eregli Demir Ve Celik Fabrikalari TAS's value of 0.27% is 86.5% below this industry median. Based on the distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #424 out of 633 companies in the Steel industry, which is below the industry midpoint. Overall, Eregli Demir Ve Celik Fabrikalari TAS has a GF Score™ of 85/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eregli Demir Ve Celik Fabrikalari TAS's Return-on-Tangible-Asset compare to NUE and STLD?
According to the Steel industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #424 out of 633 companies for Return-on-Tangible-Asset. This places Eregli Demir Ve Celik Fabrikalari TAS in the lower half of its industry. The industry median Return-on-Tangible-Asset is 2.00. Eregli Demir Ve Celik Fabrikalari TAS's value of 0.27% is 86.5% below this benchmark. Historically, Eregli Demir Ve Celik Fabrikalari TAS's own Return-on-Tangible-Asset has ranged from 0.09 to 17.24 over the past decade. While the company's 10-year median is 7.40 vs. the industry median of 2.00, Eregli Demir Ve Celik Fabrikalari TAS has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Return-on-Tangible-Asset for a Steel company?
The median Return-on-Tangible-Asset among Steel companies is 2.00, based on 633 companies in the industry. Companies in the top quartile (top 25%) have a Return-on-Tangible-Asset significantly above this median, while those in the bottom quartile fall well below. However, Return-on-Tangible-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eregli Demir Ve Celik Fabrikalari TAS's current Return-on-Tangible-Asset of 0.27% is 86.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Return-on-Tangible-Asset mean?
A high Return-on-Tangible-Asset can signal that a stock is expensive relative to its fundamentals. Return on tangible assets is the ratio of current-period net income to average two-period tangible assets. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. For the Steel industry, the median Return-on-Tangible-Asset is 2.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eregli Demir Ve Celik Fabrikalari TAS's current Return-on-Tangible-Asset is 0.27%, which is 96% below median its own 10-year median of 7.40. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eregli Demir Ve Celik Fabrikalari TAS stock overvalued right now?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS (ERELY) is currently considered Significantly Overvalued. The stock's GF Value™ is $6.84, compared to a current price of $9.00 — trading 31.6% above its estimated fair value. The current Return-on-Tangible-Asset is 0.27%, which is 96% below median its 10-year median of 7.40 and 86.5% below the Steel industry median of 2.00. Eregli Demir Ve Celik Fabrikalari TAS's overall GF Score™ is 85/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Return-on-Tangible-Asset calculated?
Return-on-Tangible-Asset is calculated from a company's financial statements. For Eregli Demir Ve Celik Fabrikalari TAS (ERELY), the current Return-on-Tangible-Asset is 0.27% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eregli Demir Ve Celik Fabrikalari TAS (ERELY) Overvalued in 2026?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS stock appears to be overvalued.
The current stock price of $9.00 is trading 31.6% above its estimated GF Value™ of $6.84.
GuruFocus considers Eregli Demir Ve Celik Fabrikalari TAS to be Significantly Overvalued.
Key valuation signals for ERELY:
Return-on-Tangible-Asset: 0.27% (96% below median its 10-year median of 7.40)
GF Value™: $6.84 vs. price of $9.00 (31.6% above fair value)
Industry Position: 86.5% below the Steel median (#424 of 633)
No single metric tells the full story. See the ERELY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eregli Demir Ve Celik Fabrikalari TAS Business Description
Eregli Demir Ve Celik Fabrikalari TAS is a Turkey-based company engaged in production of flat steel, long steel and other steel products. The company also provides engineering and project management services, as well as port services. As well, the company owns an iron ore mining arm. The company's steel products include hot-rolled product, cold-rolled product, galvanized products, metal packaging steel, billet, wire-rod, etc. These products are used in the automotive sector, manufacturing industry, projected works, consumer products, packaging industries and others. Most of the company's revenue comes from the Turkish domestic market.
85GF Score
Get the complete analysis for ERELY
Return-on-Tangible-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ERELY has been successfully added to your 
