ERELY's 5-Year Yield-on-Cost % is ranked worse than 74.53% of 318
companies
in the Steel industry
Industry Median: 3.36
vs ERELY: 1.32
Eregli Demir Ve Celik Fabrikalari TAS (OTCPK:ERELY) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Eregli Demir Ve Celik Fabrikalari TAS 5-Year Yield-on-Cost % Related Terms
ERELY vs NUE, STLD, RS: 5-Year Yield-on-Cost % Comparison
For the Steel subindustry, Eregli Demir Ve Celik Fabrikalari TAS's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eregli Demir Ve Celik Fabrikalari TAS 5-Year Yield-on-Cost % vs Steel Industry
For the Steel industry and Basic Materials sector, Eregli Demir Ve Celik Fabrikalari TAS's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Eregli Demir Ve Celik Fabrikalari TAS's 5-Year Yield-on-Cost % falls into.
Eregli Demir Ve Celik Fabrikalari TAS 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Eregli Demir Ve Celik Fabrikalari TAS (ERELY) has a 5-Year Yield-on-Cost % of 1.32 as of Jul. 11, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. This is 81% below median its historical median of 6.96. Over the past decade, Eregli Demir Ve Celik Fabrikalari TAS's 5-Year Yield-on-Cost % has ranged from 0.59 to 22.19. According to the industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #237 out of 318 companies in the Steel industry, placing it in the top 74.5%.
Is Eregli Demir Ve Celik Fabrikalari TAS's 5-Year Yield-on-Cost % too high?
Eregli Demir Ve Celik Fabrikalari TAS's current 5-Year Yield-on-Cost % of 1.32 is 81% below median its 10-year median of 6.96. Over the past 10 years, this metric has ranged from a low of 0.59 to a high of 22.19. The Steel industry median 5-Year Yield-on-Cost % is 3.36. Eregli Demir Ve Celik Fabrikalari TAS's value of 1.32 is 60.7% below this industry median. Based on the distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #237 out of 318 companies in the Steel industry, which is below the industry midpoint. Overall, Eregli Demir Ve Celik Fabrikalari TAS has a GF Score™ of 85/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eregli Demir Ve Celik Fabrikalari TAS's 5-Year Yield-on-Cost % compare to NUE and STLD?
According to the Steel industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #237 out of 318 companies for 5-Year Yield-on-Cost %. This places Eregli Demir Ve Celik Fabrikalari TAS in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.36. Eregli Demir Ve Celik Fabrikalari TAS's value of 1.32 is 60.7% below this benchmark. Historically, Eregli Demir Ve Celik Fabrikalari TAS's own 5-Year Yield-on-Cost % has ranged from 0.59 to 22.19 over the past decade. While the company's 10-year median is 6.96 vs. the industry median of 3.36, Eregli Demir Ve Celik Fabrikalari TAS has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Steel company?
The median 5-Year Yield-on-Cost % among Steel companies is 3.36, based on 318 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eregli Demir Ve Celik Fabrikalari TAS's current 5-Year Yield-on-Cost % of 1.32 is 60.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. For the Steel industry, the median 5-Year Yield-on-Cost % is 3.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eregli Demir Ve Celik Fabrikalari TAS's current 5-Year Yield-on-Cost % is 1.32, which is 81% below median its own 10-year median of 6.96. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eregli Demir Ve Celik Fabrikalari TAS stock overvalued right now?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS (ERELY) is currently considered Significantly Overvalued. The stock's GF Value™ is $6.83, compared to a current price of $9.00 — trading 31.8% above its estimated fair value. The current 5-Year Yield-on-Cost % is 1.32, which is 81% below median its 10-year median of 6.96 and 60.7% below the Steel industry median of 3.36. Eregli Demir Ve Celik Fabrikalari TAS's overall GF Score™ is 85/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Eregli Demir Ve Celik Fabrikalari TAS (ERELY), the current 5-Year Yield-on-Cost % is 1.32 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eregli Demir Ve Celik Fabrikalari TAS (ERELY) Overvalued in 2026?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS stock appears to be overvalued.
The current stock price of $9.00 is trading 31.8% above its estimated GF Value™ of $6.83.
GuruFocus considers Eregli Demir Ve Celik Fabrikalari TAS to be Significantly Overvalued.
Key valuation signals for ERELY:
5-Year Yield-on-Cost %: 1.32 (81% below median its 10-year median of 6.96)
GF Value™: $6.83 vs. price of $9.00 (31.8% above fair value)
Industry Position: 60.7% below the Steel median (#237 of 318)
No single metric tells the full story. See the ERELY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eregli Demir Ve Celik Fabrikalari TAS Business Description
Eregli Demir Ve Celik Fabrikalari TAS is a Turkey-based company engaged in production of flat steel, long steel and other steel products. The company also provides engineering and project management services, as well as port services. As well, the company owns an iron ore mining arm. The company's steel products include hot-rolled product, cold-rolled product, galvanized products, metal packaging steel, billet, wire-rod, etc. These products are used in the automotive sector, manufacturing industry, projected works, consumer products, packaging industries and others. Most of the company's revenue comes from the Turkish domestic market.
85GF Score
Get the complete analysis for ERELY
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ERELY has been successfully added to your 