* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
ERELY's PEG Ratio is not ranked *
in the Steel industry.
Industry Median: 1.43 * Ranked among companies with meaningful PEG Ratio only.
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Eregli Demir Ve Celik Fabrikalari TAS (OTCPK:ERELY) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Eregli Demir Ve Celik Fabrikalari TAS PEG Ratio Related Terms
Eregli Demir Ve Celik Fabrikalari TAS PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS PEG Ratio Chart
For the Steel subindustry, Eregli Demir Ve Celik Fabrikalari TAS's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eregli Demir Ve Celik Fabrikalari TAS PEG Ratio vs Steel Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Eregli Demir Ve Celik Fabrikalari TAS (ERELY) has a PEG Ratio of 138.25 as of Jun. 28, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. This is 38303% above median its historical median of 0.36. Over the past decade, Eregli Demir Ve Celik Fabrikalari TAS's PEG Ratio has ranged from 0.10 to 59.95. According to the industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #999999 out of 201 companies in the Steel industry.
Is Eregli Demir Ve Celik Fabrikalari TAS's PEG Ratio too high?
Eregli Demir Ve Celik Fabrikalari TAS's current PEG Ratio of 138.25 is 38303% above median its 10-year median of 0.36. Over the past 10 years, this metric has ranged from a low of 0.10 to a high of 59.95. The Steel industry median PEG Ratio is 1.43. Eregli Demir Ve Celik Fabrikalari TAS's value of 138.25 is 9567.8% above this industry median. Based on the distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #999999 out of 201 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Eregli Demir Ve Celik Fabrikalari TAS has a GF Score™ of 92/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eregli Demir Ve Celik Fabrikalari TAS's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #999999 out of 201 companies for PEG Ratio. This places Eregli Demir Ve Celik Fabrikalari TAS in the lower half of its industry. The industry median PEG Ratio is 1.43. Eregli Demir Ve Celik Fabrikalari TAS's value of 138.25 is 9567.8% above this benchmark. Historically, Eregli Demir Ve Celik Fabrikalari TAS's own PEG Ratio has ranged from 0.10 to 59.95 over the past decade. While the company's 10-year median is 0.36 vs. the industry median of 1.43, Eregli Demir Ve Celik Fabrikalari TAS has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.43, based on 201 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eregli Demir Ve Celik Fabrikalari TAS's current PEG Ratio of 138.25 is 9567.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. For the Steel industry, the median PEG Ratio is 1.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eregli Demir Ve Celik Fabrikalari TAS's current PEG Ratio is 138.25, which is 38303% above median its own 10-year median of 0.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eregli Demir Ve Celik Fabrikalari TAS stock overvalued right now?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS (ERELY) is currently considered Modestly Overvalued. The stock's GF Value™ is $6.97, compared to a current price of $9.00 — trading 29.1% above its estimated fair value. The current PEG Ratio is 138.25, which is 38303% above median its 10-year median of 0.36 and 9567.8% above the Steel industry median of 1.43. Eregli Demir Ve Celik Fabrikalari TAS's overall GF Score™ is 92/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Eregli Demir Ve Celik Fabrikalari TAS (ERELY), the current PEG Ratio is 138.25 as of Jun. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eregli Demir Ve Celik Fabrikalari TAS (ERELY) Overvalued in 2026?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS stock appears to be overvalued.
The current stock price of $9.00 is trading 29.1% above its estimated GF Value™ of $6.97.
GuruFocus considers Eregli Demir Ve Celik Fabrikalari TAS to be Modestly Overvalued.
Key valuation signals for ERELY:
PEG Ratio: 138.25 (38303% above median its 10-year median of 0.36)
GF Value™: $6.97 vs. price of $9.00 (29.1% above fair value)
Industry Position: 9567.8% above the Steel median (#999999 of 201)
No single metric tells the full story. See the ERELY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eregli Demir Ve Celik Fabrikalari TAS Business Description
Eregli Demir Ve Celik Fabrikalari TAS is a Turkey-based company engaged in production of flat steel, long steel and other steel products. The company also provides engineering and project management services, as well as port services. As well, the company owns an iron ore mining arm. The company's steel products include hot-rolled product, cold-rolled product, galvanized products, metal packaging steel, billet, wire-rod, etc. These products are used in the automotive sector, manufacturing industry, projected works, consumer products, packaging industries and others. Most of the company's revenue comes from the Turkish domestic market.
92GF Score
Get the complete analysis for ERELY
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ERELY has been successfully added to your 
