OCF Yield % is calculated as Cash Flow from Operations divided by Market Capitalization. It is a financial solvency ratio that compares the operating cash flow a company is expected to earn against its market value.
ERELY'
s OCF Yield % Range Over the Past 10 Years
Min: 0.3 Med: 11.97 Max: 39.96
Current: 17.71
During the past 13 years, the highest OCF Yield % of Eregli Demir Ve Celik Fabrikalari TAS was 39.96%. The lowest was 0.30%. And the median was 11.97%.
ERELY's OCF Yield % is ranked better than 75.47% of 636
companies
in the Steel industry
Industry Median: 6.14
vs ERELY: 17.71
Eregli Demir Ve Celik Fabrikalari TAS OCF Yield % Explanation
Similar to Earnings Yield %, OCF Yield % is financial solvency ratio. A lower ratio suggests a less attractive investment, indicating that investors might not receive substantial returns in proportion to their investment. Conversely, a high operating cash flow yield signals that a company generates sufficient cash to comfortably meet its debts, obligations, and dividend payments, making it a promising investment choice.
Eregli Demir Ve Celik Fabrikalari TAS OCF Yield % Related Terms
Eregli Demir Ve Celik Fabrikalari TAS OCF Yield % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS OCF Yield % Chart
For the Steel subindustry, Eregli Demir Ve Celik Fabrikalari TAS's OCF Yield %, along with its competitors' market caps and OCF Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eregli Demir Ve Celik Fabrikalari TAS OCF Yield % vs Steel Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Eregli Demir Ve Celik Fabrikalari TAS (ERELY) has a OCF Yield % of 17.71 as of Jun. 27, 2026. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. This is 48% above median its historical median of 11.97. Over the past decade, Eregli Demir Ve Celik Fabrikalari TAS's OCF Yield % has ranged from 0.30 to 39.96. According to the industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #156 out of 636 companies in the Steel industry, placing it in the top 24.5%.
Is Eregli Demir Ve Celik Fabrikalari TAS's OCF Yield % too high?
Eregli Demir Ve Celik Fabrikalari TAS's current OCF Yield % of 17.71 is 48% above median its 10-year median of 11.97. Over the past 10 years, this metric has ranged from a low of 0.30 to a high of 39.96. The Steel industry median OCF Yield % is 6.14. Eregli Demir Ve Celik Fabrikalari TAS's value of 17.71 is 188.4% above this industry median. Based on the distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #156 out of 636 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Eregli Demir Ve Celik Fabrikalari TAS has a GF Score™ of 92/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eregli Demir Ve Celik Fabrikalari TAS's OCF Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, Eregli Demir Ve Celik Fabrikalari TAS ranks #156 out of 636 companies for OCF Yield %. This places Eregli Demir Ve Celik Fabrikalari TAS in the top 25% of its industry — outperforming the majority of peers. The industry median OCF Yield % is 6.14. Eregli Demir Ve Celik Fabrikalari TAS's value of 17.71 is 188.4% above this benchmark. Historically, Eregli Demir Ve Celik Fabrikalari TAS's own OCF Yield % has ranged from 0.30 to 39.96 over the past decade. While the company's 10-year median is 11.97 vs. the industry median of 6.14, Eregli Demir Ve Celik Fabrikalari TAS has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good OCF Yield % for a Steel company?
The median OCF Yield % among Steel companies is 6.14, based on 636 companies in the industry. Companies in the top quartile (top 25%) have a OCF Yield % significantly above this median, while those in the bottom quartile fall well below. However, OCF Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eregli Demir Ve Celik Fabrikalari TAS's current OCF Yield % of 17.71 is 188.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high OCF Yield % mean?
A high OCF Yield % can signal that a stock is expensive relative to its fundamentals. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Eregli Demir Ve Celik Fabrikalari TAS and its competitors. For the Steel industry, the median OCF Yield % is 6.14 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eregli Demir Ve Celik Fabrikalari TAS's current OCF Yield % is 17.71, which is 48% above median its own 10-year median of 11.97. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eregli Demir Ve Celik Fabrikalari TAS stock overvalued right now?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS (ERELY) is currently considered Significantly Overvalued. The stock's GF Value™ is $6.75, compared to a current price of $9.00 — trading 33.3% above its estimated fair value. The current OCF Yield % is 17.71, which is 48% above median its 10-year median of 11.97 and 188.4% above the Steel industry median of 6.14. Eregli Demir Ve Celik Fabrikalari TAS's overall GF Score™ is 92/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is OCF Yield % calculated?
OCF Yield % is calculated from a company's financial statements. For Eregli Demir Ve Celik Fabrikalari TAS (ERELY), the current OCF Yield % is 17.71 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eregli Demir Ve Celik Fabrikalari TAS (ERELY) Overvalued in 2026?
Based on GuruFocus' analysis, Eregli Demir Ve Celik Fabrikalari TAS stock appears to be overvalued.
The current stock price of $9.00 is trading 33.3% above its estimated GF Value™ of $6.75.
GuruFocus considers Eregli Demir Ve Celik Fabrikalari TAS to be Significantly Overvalued.
Key valuation signals for ERELY:
OCF Yield %: 17.71 (48% above median its 10-year median of 11.97)
GF Value™: $6.75 vs. price of $9.00 (33.3% above fair value)
Industry Position: 188.4% above the Steel median (#156 of 636)
No single metric tells the full story. See the ERELY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eregli Demir Ve Celik Fabrikalari TAS Business Description
Eregli Demir Ve Celik Fabrikalari TAS is a Turkey-based company engaged in production of flat steel, long steel and other steel products. The company also provides engineering and project management services, as well as port services. As well, the company owns an iron ore mining arm. The company's steel products include hot-rolled product, cold-rolled product, galvanized products, metal packaging steel, billet, wire-rod, etc. These products are used in the automotive sector, manufacturing industry, projected works, consumer products, packaging industries and others. Most of the company's revenue comes from the Turkish domestic market.
92GF Score
Get the complete analysis for ERELY
OCF Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ERELY has been successfully added to your 
