StantecTSX:STN -0.18%86 PEG Ratio is 1.04 as of Jul. 02, 2026, which is 61% below its 10-year median of 2.64. GuruFocus rates TSX:STN with a GF Score™ of 86/100 and a GF Value™ of C$128.10 (Modestly Undervalued). Among 685 Construction companies, Stantec ranks better than 51.97% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Stantec's PE Ratio without NRI is 17.88. Stantec's 5-Year EBITDA growth rate is 17.20%. Therefore, Stantec's PEG Ratio for today is 1.04.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Stantec's PEG Ratio or its related term are showing as below:
TSX:STN'
s PEG Ratio Range Over the Past 10 Years
Min: 0.89 Med: 2.64 Max: 13.13
Current: 1.04
During the past 13 years, Stantec's highest PEG Ratio was 13.13. The lowest was 0.89. And the median was 2.64.
TSX:STN's PEG Ratio is ranked better than 51.97% of 685
companies
in the Construction industry
Industry Median: 1.1
vs TSX:STN: 1.04
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Stantec (TSX:STN) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Stantec PEG Ratio Related Terms
Stantec PEG Ratio Historical Data
* Premium members only.
The historical data trend for Stantec's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Engineering & Construction subindustry, Stantec's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Stantec PEG Ratio vs Construction Industry
For the Construction industry and Industrials sector, Stantec's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Stantec's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Stantec (TSX:STN) has a PEG Ratio of 1.04 as of Jul. 02, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Stantec and its competitors. This is 61% below median its historical median of 2.64. Over the past decade, Stantec's PEG Ratio has ranged from 0.89 to 13.13. According to the industry distribution chart, Stantec ranks #329 out of 685 companies in the Construction industry, placing it in the top 48%.
Is Stantec's PEG Ratio too high?
Stantec's current PEG Ratio of 1.04 is 61% below median its 10-year median of 2.64. Over the past 10 years, this metric has ranged from a low of 0.89 to a high of 13.13. The Construction industry median PEG Ratio is 1.10. Stantec's value of 1.04 is 5.5% below this industry median. Based on the distribution chart, Stantec ranks #329 out of 685 companies in the Construction industry, which is above the industry midpoint. Overall, Stantec has a GF Score™ of 86/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Stantec's PEG Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, Stantec ranks #329 out of 685 companies for PEG Ratio. This puts Stantec in the upper half of its industry. The industry median PEG Ratio is 1.10. Stantec's value of 1.04 is 5.5% below this benchmark. Historically, Stantec's own PEG Ratio has ranged from 0.89 to 13.13 over the past decade. While the company's 10-year median is 2.64 vs. the industry median of 1.10, Stantec has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Construction company?
The median PEG Ratio among Construction companies is 1.10, based on 685 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Stantec's current PEG Ratio of 1.04 is 5.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Stantec and its competitors. For the Construction industry, the median PEG Ratio is 1.10 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Stantec's current PEG Ratio is 1.04, which is 61% below median its own 10-year median of 2.64. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Stantec stock overvalued right now?
Based on GuruFocus' analysis, Stantec (TSX:STN) is currently considered Modestly Undervalued. The stock's GF Value™ is C$128.10, compared to a current price of C$97.82 — trading 23.6% below its estimated fair value. The current PEG Ratio is 1.04, which is 61% below median its 10-year median of 2.64 and 5.5% below the Construction industry median of 1.10. Stantec's overall GF Score™ is 86/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Stantec (TSX:STN), the current PEG Ratio is 1.04 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Stantec (TSX:STN) Overvalued in 2026?
Based on GuruFocus' analysis, Stantec stock appears to be undervalued.
The current stock price of C$97.82 is trading 23.6% below its estimated GF Value™ of C$128.10.
GuruFocus considers Stantec to be Modestly Undervalued.
Key valuation signals for TSX:STN:
PEG Ratio: 1.04 (61% below median its 10-year median of 2.64)
GF Value™: C$128.10 vs. price of C$97.82 (23.6% below fair value)
Industry Position: 5.5% below the Construction median (#329 of 685)
No single metric tells the full story. See the TSX:STN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Stantec Inc is a sustainable engineering, architecture, and environmental consulting company. It offers services through the following business operating units; Environmental Services, Infrastructure, Water, Buildings, and Energy & Resources. Maximum revenue is derived from its Infrastructure business unit, which is engaged in evaluating, planning, and designing infrastructure solutions for transportation, community development, and urban spaces. The company's reportable segments are the United States, which derives maximum revenue, Canada, and Global. These segments provide consulting in engineering, architecture, interior design, landscape architecture, surveying, environmental sciences, project management, and project economics services in the area of infrastructure and facilities.
86GF Score
Get the complete analysis for TSX:STN
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSX:STN has been successfully added to your 
