Titan MachineryFRA:3TY +0.54%61 Altman Z2-Score is 2.36 as of Jun. 27, 2026, which is 24% below its 10-year median of 3.09. GuruFocus rates FRA:3TY with a GF Score™ of 61/100 and a GF Value™ of €14.54 (Modestly Overvalued). The stock has 8 warning signs investors should review. Among 153 Industrial Distribution companies, Titan Machinery ranks worse than 79.08% on this metric.
Altman Z2-Score, also known as Z"-Score, is used to predict the likelihood that a non-manufacturing company (excluding property/financial company) will face bankruptcy within a two-year period.
Titan Machinery has a Altman Z2-Score of 2.36, indicating it is in Grey Zones. This implies that Titan Machinery is in some kind of financial stress. If it is below 1.1, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z2-Score <= 1.1, it is in Distress Zones.
When Altman Z2-Score >= 2.6, it is in Safe Zones.
When Altman Z2-Score is between 1.1 and 2.6, it is in Grey Zones.
The historical rank and industry rank for Titan Machinery's Altman Z2-Score or its related term are showing as below:
FRA:3TY'
s Altman Z2-Score Range Over the Past 10 Years
Min: 2.08 Med: 3.09 Max: 4.51
Current: 2.36
During the past 13 years, Titan Machinery's highest Altman Z2-Score was 4.51. The lowest was 2.08. And the median was 3.09.
The original Z-Score model was based on publicly traded manufacturing companies while the Z2-Score, also known as Z"-score can be used for any type of company excluding property/financial companies. Both Z-Score and Z2-Score describes the financial health of a company, and its likelihood of financial distress.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
Altman Z2-Score does not apply to financial companies.
Titan Machinery Altman Z2-Score Related Terms
Titan Machinery Altman Z2-Score Historical Data
* Premium members only.
The historical data trend for Titan Machinery's Altman Z2-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FRA:3TY vs BXC, EVI, TLIH: Altman Z2-Score Comparison
For the Industrial Distribution subindustry, Titan Machinery's Altman Z2-Score, along with its competitors' market caps and Altman Z2-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Titan Machinery Altman Z2-Score vs Industrial Distribution Industry
For the Industrial Distribution industry and Industrials sector, Titan Machinery's Altman Z2-Score distribution charts can be found below:
* The bar in red indicates where Titan Machinery's Altman Z2-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Z2-Score, also known as Z"-Score is the Z-Score for non-manufacturing companies excluding property/financial companies.
Titan Machinery's Altman Z2-Score for today is calculated with this formula:
Z
=
6.56
*
X1
+
3.26
*
X2
+
6.72
*
X3
+
1.05
*
X4_2
=
6.56
*
0.1834
+
3.26
*
0.1818
+
6.72
*
-0.0002
+
1.05
*
0.5404
=
2.36
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z2-Score when X4_2 value is 0.
Titan Machinery (FRA:3TY) has a Altman Z2-Score of 2.36 as of Jun. 27, 2026. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Titan Machinery and its competitors. This is 24% below median its historical median of 3.09. Over the past decade, Titan Machinery's Altman Z2-Score has ranged from 2.08 to 4.51. According to the industry distribution chart, Titan Machinery ranks #121 out of 153 companies in the Industrial Distribution industry, placing it in the top 79.1%.
Is Titan Machinery's Altman Z2-Score too high?
Titan Machinery's current Altman Z2-Score of 2.36 is 24% below median its 10-year median of 3.09. Over the past 10 years, this metric has ranged from a low of 2.08 to a high of 4.51. The Industrial Distribution industry median Altman Z2-Score is 4.25. Titan Machinery's value of 2.36 is 44.5% below this industry median. Based on the distribution chart, Titan Machinery ranks #121 out of 153 companies in the Industrial Distribution industry, which is in the bottom quartile relative to peers. Overall, Titan Machinery has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Titan Machinery's Altman Z2-Score compare to BXC and EVI?
According to the Industrial Distribution industry distribution chart, Titan Machinery ranks #121 out of 153 companies for Altman Z2-Score. This places Titan Machinery in the lower half of its industry. The industry median Altman Z2-Score is 4.25. Titan Machinery's value of 2.36 is 44.5% below this benchmark. Historically, Titan Machinery's own Altman Z2-Score has ranged from 2.08 to 4.51 over the past decade. While the company's 10-year median is 3.09 vs. the industry median of 4.25, Titan Machinery has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z2-Score for an Industrial Distribution company?
The median Altman Z2-Score among Industrial Distribution companies is 4.25, based on 153 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z2-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z2-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Titan Machinery's current Altman Z2-Score of 2.36 is 44.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z2-Score mean?
A high Altman Z2-Score can signal that a stock is expensive relative to its fundamentals. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Titan Machinery and its competitors. For the Industrial Distribution industry, the median Altman Z2-Score is 4.25 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Titan Machinery's current Altman Z2-Score is 2.36, which is 24% below median its own 10-year median of 3.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Titan Machinery stock overvalued right now?
Based on GuruFocus' analysis, Titan Machinery (FRA:3TY) is currently considered Modestly Overvalued. The stock's GF Value™ is €14.54, compared to a current price of €18.60 — trading 27.9% above its estimated fair value. The current Altman Z2-Score is 2.36, which is 24% below median its 10-year median of 3.09 and 44.5% below the Industrial Distribution industry median of 4.25. Titan Machinery's overall GF Score™ is 61/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z2-Score calculated?
Altman Z2-Score is calculated from a company's financial statements. For Titan Machinery (FRA:3TY), the current Altman Z2-Score is 2.36 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Titan Machinery (FRA:3TY) Overvalued in 2026?
Based on GuruFocus' analysis, Titan Machinery stock appears to be overvalued.
The current stock price of €18.60 is trading 27.9% above its estimated GF Value™ of €14.54.
GuruFocus considers Titan Machinery to be Modestly Overvalued.
Key valuation signals for FRA:3TY:
Altman Z2-Score: 2.36 (24% below median its 10-year median of 3.09)
GF Value™: €14.54 vs. price of €18.60 (27.9% above fair value)
Industry Position: 44.5% below the Industrial Distribution median (#121 of 153)
No single metric tells the full story. See the FRA:3TY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Titan Machinery Inc owns and operates a network of full-service agricultural and construction equipment stores. The company sells and repairs agricultural equipment, including machinery and attachments for large-scale farming and home and gardening purposes, as well as construction equipment. It operates through following segments: The Agriculture segment sells, services, and rents machinery and related parts and attachments, for uses ranging from large-scale farming to home and garden use, The construction segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from heavy construction to light industrial machinery use, and the Europe and Australia segments.
61GF Score
Get the complete analysis for FRA:3TY
Altman Z2-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:3TY has been successfully added to your 
