TPE:1513'
s Current Ratio Range Over the Past 10 Years
Min: 1.1 Med: 1.37 Max: 1.61
Current: 1.1
During the past 13 years, Chung-Hsin Electric & Machinery Mfg's highest Current Ratio was 1.61. The lowest was 1.10. And the median was 1.37.
TPE:1513's Current Ratio is ranked worse than 87.47% of 3073
companies
in the Industrial Products industry
Industry Median: 1.96
vs TPE:1513: 1.10
Chung-Hsin Electric & Machinery Mfg (TPE:1513) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Chung-Hsin Electric & Machinery Mfg Current Ratio Related Terms
Chung-Hsin Electric & Machinery Mfg Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg Current Ratio Chart
TPE:1513 vs GEV, ETN, PH: Current Ratio Comparison
For the Specialty Industrial Machinery subindustry, Chung-Hsin Electric & Machinery Mfg's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chung-Hsin Electric & Machinery Mfg Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chung-Hsin Electric & Machinery Mfg's Current Ratio distribution charts can be found below:
* The bar in red indicates where Chung-Hsin Electric & Machinery Mfg's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) has a Current Ratio of 1.10 as of Dec. 2025. This is 20% below median its historical median of 1.37. Over the past decade, Chung-Hsin Electric & Machinery Mfg's Current Ratio has ranged from 1.10 to 1.61. According to the industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #2688 out of 3073 companies in the Industrial Products industry, placing it in the top 87.5%.
Is Chung-Hsin Electric & Machinery Mfg's Current Ratio too high?
Chung-Hsin Electric & Machinery Mfg's current Current Ratio of 1.10 is 20% below median its 10-year median of 1.37. Over the past 10 years, this metric has ranged from a low of 1.10 to a high of 1.61. The Industrial Products industry median Current Ratio is 1.96. Chung-Hsin Electric & Machinery Mfg's value of 1.10 is 43.9% below this industry median. Based on the distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #2688 out of 3073 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Chung-Hsin Electric & Machinery Mfg has a GF Score™ of 93/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chung-Hsin Electric & Machinery Mfg's Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #2688 out of 3073 companies for Current Ratio. This places Chung-Hsin Electric & Machinery Mfg in the lower half of its industry. The industry median Current Ratio is 1.96. Chung-Hsin Electric & Machinery Mfg's value of 1.10 is 43.9% below this benchmark. Historically, Chung-Hsin Electric & Machinery Mfg's own Current Ratio has ranged from 1.10 to 1.61 over the past decade. While the company's 10-year median is 1.37 vs. the industry median of 1.96, Chung-Hsin Electric & Machinery Mfg has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.96, based on 3,073 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chung-Hsin Electric & Machinery Mfg's current Current Ratio of 1.10 is 43.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chung-Hsin Electric & Machinery Mfg's current Current Ratio is 1.10, which is 20% below median its own 10-year median of 1.37. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chung-Hsin Electric & Machinery Mfg stock overvalued right now?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg (TPE:1513) is currently considered Fairly Valued. The stock's GF Value™ is NT$169.40, compared to a current price of NT$176.50 — trading 4.2% above its estimated fair value. The current Current Ratio is 1.10, which is 20% below median its 10-year median of 1.37 and 43.9% below the Industrial Products industry median of 1.96. Chung-Hsin Electric & Machinery Mfg's overall GF Score™ is 93/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Chung-Hsin Electric & Machinery Mfg (TPE:1513), the current Current Ratio is 1.10 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chung-Hsin Electric & Machinery Mfg (TPE:1513) Overvalued in 2026?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg stock appears to be overvalued.
The current stock price of NT$176.50 is trading 4.2% above its estimated GF Value™ of NT$169.40.
GuruFocus considers Chung-Hsin Electric & Machinery Mfg to be Fairly Valued.
Key valuation signals for TPE:1513:
Current Ratio: 1.10 (20% below median its 10-year median of 1.37)
GF Value™: NT$169.40 vs. price of NT$176.50 (4.2% above fair value)
Industry Position: 43.9% below the Industrial Products median (#2688 of 3073)
No single metric tells the full story. See the TPE:1513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chung-Hsin Electric & Machinery Mfg Business Description
Chung-Hsin Electric & Machinery Mfg Corp is a manufacturer of power generation machinery and equipment and its related parts, air-conditioners, dehumidifiers, and meters. The company's products include chillers, generator sets, high voltage circuit breakers, smart grid electric power automation equipment, customized fuel cell systems, methanol reformers, handheld document terminals, industrial computers, and parking facilities, among others. Its operating segments include Electricity Power; Service and Engineering and others. The company generates maximum revenue from the Electricity Power segment.
93GF Score
Get the complete analysis for TPE:1513
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1513 has been successfully added to your 
