* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
TPE:1513's PEG Ratio is ranked better than 64.32% of 1278
companies
in the Industrial Products industry
Industry Median: 1.8
vs TPE:1513: 1.22
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Chung-Hsin Electric & Machinery Mfg PEG Ratio Related Terms
Chung-Hsin Electric & Machinery Mfg PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg PEG Ratio Chart
For the Specialty Industrial Machinery subindustry, Chung-Hsin Electric & Machinery Mfg's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chung-Hsin Electric & Machinery Mfg PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chung-Hsin Electric & Machinery Mfg's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Chung-Hsin Electric & Machinery Mfg's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) has a PEG Ratio of 1.22 as of Jul. 11, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Chung-Hsin Electric & Machinery Mfg and its competitors. This is near median its historical median of 1.27. Over the past decade, Chung-Hsin Electric & Machinery Mfg's PEG Ratio has ranged from 0.23 to 37.44. According to the industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #456 out of 1278 companies in the Industrial Products industry, placing it in the top 35.7%.
Is Chung-Hsin Electric & Machinery Mfg's PEG Ratio too high?
Chung-Hsin Electric & Machinery Mfg's current PEG Ratio of 1.22 is near median its 10-year median of 1.27. Over the past 10 years, this metric has ranged from a low of 0.23 to a high of 37.44. The Industrial Products industry median PEG Ratio is 1.80. Chung-Hsin Electric & Machinery Mfg's value of 1.22 is 32.2% below this industry median. Based on the distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #456 out of 1278 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Chung-Hsin Electric & Machinery Mfg has a GF Score™ of 92/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chung-Hsin Electric & Machinery Mfg's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #456 out of 1278 companies for PEG Ratio. This puts Chung-Hsin Electric & Machinery Mfg in the upper half of its industry. The industry median PEG Ratio is 1.80. Chung-Hsin Electric & Machinery Mfg's value of 1.22 is 32.2% below this benchmark. Historically, Chung-Hsin Electric & Machinery Mfg's own PEG Ratio has ranged from 0.23 to 37.44 over the past decade. While the company's 10-year median is 1.27 vs. the industry median of 1.80, Chung-Hsin Electric & Machinery Mfg has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.80, based on 1,278 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chung-Hsin Electric & Machinery Mfg's current PEG Ratio of 1.22 is 32.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Chung-Hsin Electric & Machinery Mfg and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chung-Hsin Electric & Machinery Mfg's current PEG Ratio is 1.22, which is near median its own 10-year median of 1.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chung-Hsin Electric & Machinery Mfg stock overvalued right now?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg (TPE:1513) is currently considered Fairly Valued. The stock's GF Value™ is NT$169.69, compared to a current price of NT$168.50 — trading 0.7% below its estimated fair value. The current PEG Ratio is 1.22, which is near median its 10-year median of 1.27 and 32.2% below the Industrial Products industry median of 1.80. Chung-Hsin Electric & Machinery Mfg's overall GF Score™ is 92/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Chung-Hsin Electric & Machinery Mfg (TPE:1513), the current PEG Ratio is 1.22 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chung-Hsin Electric & Machinery Mfg (TPE:1513) Overvalued in 2026?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg stock appears to be undervalued.
The current stock price of NT$168.50 is trading 0.7% below its estimated GF Value™ of NT$169.69.
GuruFocus considers Chung-Hsin Electric & Machinery Mfg to be Fairly Valued.
Key valuation signals for TPE:1513:
PEG Ratio: 1.22 (near median its 10-year median of 1.27)
GF Value™: NT$169.69 vs. price of NT$168.50 (0.7% below fair value)
Industry Position: 32.2% below the Industrial Products median (#456 of 1278)
No single metric tells the full story. See the TPE:1513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chung-Hsin Electric & Machinery Mfg Business Description
Chung-Hsin Electric & Machinery Mfg Corp is a manufacturer of power generation machinery and equipment and its related parts, air-conditioners, dehumidifiers, and meters. The company's products include chillers, generator sets, high voltage circuit breakers, smart grid electric power automation equipment, customized fuel cell systems, methanol reformers, handheld document terminals, industrial computers, and parking facilities, among others. Its operating segments include Electricity Power; Service and Engineering and others. The company generates maximum revenue from the Electricity Power segment.
92GF Score
Get the complete analysis for TPE:1513
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1513 has been successfully added to your 
