Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
TPE:1513'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.88 Med: 3.02 Max: 4.52
Current: 0.88
During the past 13 years, the highest Debt-to-EBITDA Ratio of Chung-Hsin Electric & Machinery Mfg was 4.52. The lowest was 0.88. And the median was 3.02.
TPE:1513's Debt-to-EBITDA is ranked better than 66.01% of 2348
companies
in the Industrial Products industry
Industry Median: 1.68
vs TPE:1513: 0.88
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Chung-Hsin Electric & Machinery Mfg Debt-to-EBITDA Related Terms
Chung-Hsin Electric & Machinery Mfg Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg Debt-to-EBITDA Chart
TPE:1513 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Chung-Hsin Electric & Machinery Mfg's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chung-Hsin Electric & Machinery Mfg Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chung-Hsin Electric & Machinery Mfg's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Chung-Hsin Electric & Machinery Mfg's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) has a Debt-to-EBITDA of 0.80 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Chung-Hsin Electric & Machinery Mfg. This is 74% below median its historical median of 3.02. Over the past decade, Chung-Hsin Electric & Machinery Mfg's Debt-to-EBITDA has ranged from 0.88 to 4.52. According to the industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #798 out of 2348 companies in the Industrial Products industry, placing it in the top 34%.
Is Chung-Hsin Electric & Machinery Mfg's Debt-to-EBITDA too high?
Chung-Hsin Electric & Machinery Mfg's current Debt-to-EBITDA of 0.80 is 74% below median its 10-year median of 3.02. Over the past 10 years, this metric has ranged from a low of 0.88 to a high of 4.52. The Industrial Products industry median Debt-to-EBITDA is 1.68. Chung-Hsin Electric & Machinery Mfg's value of 0.80 is 52.4% below this industry median. Based on the distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #798 out of 2348 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Chung-Hsin Electric & Machinery Mfg has a GF Score™ of 94/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chung-Hsin Electric & Machinery Mfg's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #798 out of 2348 companies for Debt-to-EBITDA. This puts Chung-Hsin Electric & Machinery Mfg in the upper half of its industry. The industry median Debt-to-EBITDA is 1.68. Chung-Hsin Electric & Machinery Mfg's value of 0.80 is 52.4% below this benchmark. Historically, Chung-Hsin Electric & Machinery Mfg's own Debt-to-EBITDA has ranged from 0.88 to 4.52 over the past decade. While the company's 10-year median is 3.02 vs. the industry median of 1.68, Chung-Hsin Electric & Machinery Mfg has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,348 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chung-Hsin Electric & Machinery Mfg's current Debt-to-EBITDA of 0.80 is 52.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Chung-Hsin Electric & Machinery Mfg. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chung-Hsin Electric & Machinery Mfg's current Debt-to-EBITDA is 0.80, which is 74% below median its own 10-year median of 3.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chung-Hsin Electric & Machinery Mfg stock overvalued right now?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg (TPE:1513) is currently considered Fairly Valued. The stock's GF Value™ is NT$169.68, compared to a current price of NT$166.00 — trading 2.2% below its estimated fair value. The current Debt-to-EBITDA is 0.80, which is 74% below median its 10-year median of 3.02 and 52.4% below the Industrial Products industry median of 1.68. Chung-Hsin Electric & Machinery Mfg's overall GF Score™ is 94/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Chung-Hsin Electric & Machinery Mfg (TPE:1513), the current Debt-to-EBITDA is 0.80 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chung-Hsin Electric & Machinery Mfg (TPE:1513) Overvalued in 2026?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg stock appears to be undervalued.
The current stock price of NT$166.00 is trading 2.2% below its estimated GF Value™ of NT$169.68.
GuruFocus considers Chung-Hsin Electric & Machinery Mfg to be Fairly Valued.
Key valuation signals for TPE:1513:
Debt-to-EBITDA: 0.80 (74% below median its 10-year median of 3.02)
GF Value™: NT$169.68 vs. price of NT$166.00 (2.2% below fair value)
Industry Position: 52.4% below the Industrial Products median (#798 of 2348)
No single metric tells the full story. See the TPE:1513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chung-Hsin Electric & Machinery Mfg Corp is a manufacturer of power generation machinery and equipment and its related parts, air-conditioners, dehumidifiers, and meters. The company's products include chillers, generator sets, high voltage circuit breakers, smart grid electric power automation equipment, customized fuel cell systems, methanol reformers, handheld document terminals, industrial computers, and parking facilities, among others. Its operating segments include Electricity Power; Service and Engineering and others. The company generates maximum revenue from the Electricity Power segment.
94GF Score
Get the complete analysis for TPE:1513
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1513 has been successfully added to your 
