The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio or its related term are showing as below:
TPE:1513'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.35 Med: 0.63 Max: 0.99
Current: 0.57
During the past 13 years, the highest Dividend Payout Ratio of Chung-Hsin Electric & Machinery Mfg was 0.99. The lowest was 0.35. And the median was 0.63.
TPE:1513's Dividend Payout Ratio is ranked worse than 70.22% of 1719
companies
in the Industrial Products industry
Industry Median: 0.37
vs TPE:1513: 0.57
During the past 13 years, the highest Trailing Annual Dividend Yield of Chung-Hsin Electric & Machinery Mfg was 6.92%. The lowest was 1.56%. And the median was 3.92%.
During the past 12 months, Chung-Hsin Electric & Machinery Mfg's average Dividends Per Share Growth Rate was 27.80% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 18.00% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 27.00% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 18.10% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Chung-Hsin Electric & Machinery Mfg was 40.90% per year. The lowest was -17.80% per year. And the median was 4.30% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Chung-Hsin Electric & Machinery Mfg Dividend Payout Ratio Related Terms
Chung-Hsin Electric & Machinery Mfg Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg Dividend Payout Ratio Chart
TPE:1513 vs GEV, ETN, PH: Dividend Payout Ratio Comparison
For the Specialty Industrial Machinery subindustry, Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chung-Hsin Electric & Machinery Mfg Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio falls into.
Chung-Hsin Electric & Machinery Mfg Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Chung-Hsin Electric & Machinery Mfg and its competitors. Over the past decade, Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio has ranged from 0.35 to 0.99. According to the industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #1207 out of 1719 companies in the Industrial Products industry, placing it in the top 70.2%.
Is Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio too high?
Chung-Hsin Electric & Machinery Mfg's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.35 to a high of 0.99. Based on the distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #1207 out of 1719 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Chung-Hsin Electric & Machinery Mfg has a GF Score™ of 91/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chung-Hsin Electric & Machinery Mfg's Dividend Payout Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #1207 out of 1719 companies for Dividend Payout Ratio. This places Chung-Hsin Electric & Machinery Mfg in the lower half of its industry. The industry median Dividend Payout Ratio is 0.37. Historically, Chung-Hsin Electric & Machinery Mfg's own Dividend Payout Ratio has ranged from 0.35 to 0.99 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,719 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Chung-Hsin Electric & Machinery Mfg and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chung-Hsin Electric & Machinery Mfg's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chung-Hsin Electric & Machinery Mfg stock overvalued right now?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg (TPE:1513) is currently considered Fairly Valued. The stock's GF Value™ is NT$169.56, compared to a current price of NT$178.50 — trading 5.3% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Chung-Hsin Electric & Machinery Mfg's overall GF Score™ is 91/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Chung-Hsin Electric & Machinery Mfg (TPE:1513), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chung-Hsin Electric & Machinery Mfg (TPE:1513) Overvalued in 2026?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg stock appears to be overvalued.
The current stock price of NT$178.50 is trading 5.3% above its estimated GF Value™ of NT$169.56.
GuruFocus considers Chung-Hsin Electric & Machinery Mfg to be Fairly Valued.
Key valuation signals for TPE:1513:
Dividend Payout Ratio: 0.00
GF Value™: NT$169.56 vs. price of NT$178.50 (5.3% above fair value)
No single metric tells the full story. See the TPE:1513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chung-Hsin Electric & Machinery Mfg Business Description
Chung-Hsin Electric & Machinery Mfg Corp is a manufacturer of power generation machinery and equipment and its related parts, air-conditioners, dehumidifiers, and meters. The company's products include chillers, generator sets, high voltage circuit breakers, smart grid electric power automation equipment, customized fuel cell systems, methanol reformers, handheld document terminals, industrial computers, and parking facilities, among others. Its operating segments include Electricity Power; Service and Engineering and others. The company generates maximum revenue from the Electricity Power segment.
91GF Score
Get the complete analysis for TPE:1513
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1513 has been successfully added to your 
