Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
TPE:1513's PB Ratio is ranked worse than 73.76% of 2980
companies
in the Industrial Products industry
Industry Median: 2.1
vs TPE:1513: 3.88
During the past 12 months, Chung-Hsin Electric & Machinery Mfg's average Book Value Per Share Growth Rate was 8.60% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 14.30% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 13.90% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 9.80% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Chung-Hsin Electric & Machinery Mfg was 16.50% per year. The lowest was -2.10% per year. And the median was 1.20% per year.
Back to Basics: PB Ratio
Chung-Hsin Electric & Machinery Mfg (TPE:1513) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
Chung-Hsin Electric & Machinery Mfg PB Ratio Related Terms
Chung-Hsin Electric & Machinery Mfg PB Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung-Hsin Electric & Machinery Mfg PB Ratio Chart
For the Specialty Industrial Machinery subindustry, Chung-Hsin Electric & Machinery Mfg's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chung-Hsin Electric & Machinery Mfg PB Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chung-Hsin Electric & Machinery Mfg's PB Ratio distribution charts can be found below:
* The bar in red indicates where Chung-Hsin Electric & Machinery Mfg's PB Ratio falls into.
Chung-Hsin Electric & Machinery Mfg PB Ratio Calculation
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Chung-Hsin Electric & Machinery Mfg (TPE:1513) has a PB Ratio of 3.73 as of Jul. 22, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Chung-Hsin Electric & Machinery Mfg and its competitors. This is 85% above median its historical median of 2.02. Over the past decade, Chung-Hsin Electric & Machinery Mfg's PB Ratio has ranged from 0.99 to 6.39. According to the industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #2198 out of 2980 companies in the Industrial Products industry, placing it in the top 73.8%.
Is Chung-Hsin Electric & Machinery Mfg's PB Ratio too high?
Chung-Hsin Electric & Machinery Mfg's current PB Ratio of 3.73 is 85% above median its 10-year median of 2.02. Over the past 10 years, this metric has ranged from a low of 0.99 to a high of 6.39. The Industrial Products industry median PB Ratio is 2.10. Chung-Hsin Electric & Machinery Mfg's value of 3.73 is 77.6% above this industry median. Based on the distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #2198 out of 2980 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Chung-Hsin Electric & Machinery Mfg has a GF Score™ of 95/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chung-Hsin Electric & Machinery Mfg's PB Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chung-Hsin Electric & Machinery Mfg ranks #2198 out of 2980 companies for PB Ratio. This places Chung-Hsin Electric & Machinery Mfg in the lower half of its industry. The industry median PB Ratio is 2.10. Chung-Hsin Electric & Machinery Mfg's value of 3.73 is 77.6% above this benchmark. Historically, Chung-Hsin Electric & Machinery Mfg's own PB Ratio has ranged from 0.99 to 6.39 over the past decade. While the company's 10-year median is 2.02 vs. the industry median of 2.10, Chung-Hsin Electric & Machinery Mfg has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for an Industrial Products company?
The median PB Ratio among Industrial Products companies is 2.10, based on 2,980 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chung-Hsin Electric & Machinery Mfg's current PB Ratio of 3.73 is 77.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Chung-Hsin Electric & Machinery Mfg and its competitors. For the Industrial Products industry, the median PB Ratio is 2.10 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chung-Hsin Electric & Machinery Mfg's current PB Ratio is 3.73, which is 85% above median its own 10-year median of 2.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chung-Hsin Electric & Machinery Mfg stock overvalued right now?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg (TPE:1513) is currently considered Fairly Valued. The stock's GF Value™ is NT$170.19, compared to a current price of NT$162.50 — trading 4.5% below its estimated fair value. The current PB Ratio is 3.73, which is 85% above median its 10-year median of 2.02 and 77.6% above the Industrial Products industry median of 2.10. Chung-Hsin Electric & Machinery Mfg's overall GF Score™ is 95/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Chung-Hsin Electric & Machinery Mfg (TPE:1513), the current PB Ratio is 3.73 as of Jul. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chung-Hsin Electric & Machinery Mfg (TPE:1513) Overvalued in 2026?
Based on GuruFocus' analysis, Chung-Hsin Electric & Machinery Mfg stock appears to be undervalued.
The current stock price of NT$162.50 is trading 4.5% below its estimated GF Value™ of NT$170.19.
GuruFocus considers Chung-Hsin Electric & Machinery Mfg to be Fairly Valued.
Key valuation signals for TPE:1513:
PB Ratio: 3.73 (85% above median its 10-year median of 2.02)
GF Value™: NT$170.19 vs. price of NT$162.50 (4.5% below fair value)
Industry Position: 77.6% above the Industrial Products median (#2198 of 2980)
No single metric tells the full story. See the TPE:1513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chung-Hsin Electric & Machinery Mfg Business Description
Chung-Hsin Electric & Machinery Mfg Corp is a manufacturer of power generation machinery and equipment and its related parts, air-conditioners, dehumidifiers, and meters. The company's products include chillers, generator sets, high voltage circuit breakers, smart grid electric power automation equipment, customized fuel cell systems, methanol reformers, handheld document terminals, industrial computers, and parking facilities, among others. Its operating segments include Electricity Power; Service and Engineering and others. The company generates maximum revenue from the Electricity Power segment.
95GF Score
Get the complete analysis for TPE:1513
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1513 has been successfully added to your 
