Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ROCO:5443's Forward Dividend Yield % is ranked better than 75.95% of 524
companies
in the Semiconductors industry
Industry Median: 0.815
vs ROCO:5443: 2.04
During the past 12 months, Gallant Precision Machining Co's average Dividends Per Share Growth Rate was 66.70% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 10.10% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 5.80% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 5.80% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Gallant Precision Machining Co was 38.70% per year. The lowest was -6.30% per year. And the median was 6.30% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
Gallant Precision Machining Co (ROCO:5443) Forward Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Gallant Precision Machining Co Forward Dividend Yield % Related Terms
ROCO:5443 vs AMAT, LRCX, KLAC: Forward Dividend Yield % Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's Forward Dividend Yield %, along with its competitors' market caps and Forward Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co Forward Dividend Yield % vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's Forward Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's Forward Dividend Yield % falls into.
Gallant Precision Machining Co Forward Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Gallant Precision Machining Co Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
TWD 2.200000
2026-06-17
2026-06-18
2026-07-10
Cash Dividend
annually
TWD:TWD 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
What does a Forward Dividend Yield % of 2.04% mean?
Gallant Precision Machining Co (ROCO:5443) has a Forward Dividend Yield % of 2.04% as of Jul. 16, 2026. Forward dividend yield is the ratio of company's expected dividends to the share price. View historical data on Gallant Precision Machining Co and its competitors. According to the industry distribution chart, Gallant Precision Machining Co ranks #126 out of 524 companies in the Semiconductors industry, placing it in the top 24%.
Is Gallant Precision Machining Co's Forward Dividend Yield % too high?
Gallant Precision Machining Co's current Forward Dividend Yield % is 2.04%. The Semiconductors industry median Forward Dividend Yield % is 0.82. Gallant Precision Machining Co's value of 2.04% is 150.3% above this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #126 out of 524 companies in the Semiconductors industry, which is in the top quartile — a strong position relative to peers. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's Forward Dividend Yield % compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #126 out of 524 companies for Forward Dividend Yield %. This places Gallant Precision Machining Co in the top 24% of its industry — outperforming the majority of peers. The industry median Forward Dividend Yield % is 0.82. Gallant Precision Machining Co's value of 2.04% is 150.3% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward Dividend Yield % for a Semiconductors company?
The median Forward Dividend Yield % among Semiconductors companies is 0.82, based on 524 companies in the industry. Companies in the top quartile (top 25%) have a Forward Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Forward Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current Forward Dividend Yield % of 2.04% is 150.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward Dividend Yield % mean?
A high Forward Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Forward dividend yield is the ratio of company's expected dividends to the share price. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median Forward Dividend Yield % is 0.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current Forward Dividend Yield % is 2.04%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.00 — trading 29.3% above its estimated fair value. The current Forward Dividend Yield % is 2.04% and 150.3% above the Semiconductors industry median of 0.82. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward Dividend Yield % calculated?
Forward Dividend Yield % is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current Forward Dividend Yield % is 2.04% as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.00 is trading 29.3% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
Forward Dividend Yield %: 2.04%
GF Value™: NT$83.54 vs. price of NT$108.00 (29.3% above fair value)
Industry Position: 150.3% above the Semiconductors median (#126 of 524)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
Forward Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
