Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
EV-to-EBITDA is calculated as enterprise value divided by its EBITDA. As of today, Gallant Precision Machining Co's enterprise value is NT$22,491 Mil.
Gallant Precision Machining Co's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 was NT$844 Mil. Therefore, Gallant Precision Machining Co's EV-to-EBITDA for today is 26.64.
The historical rank and industry rank for Gallant Precision Machining Co's EV-to-EBITDA or its related term are showing as below:
ROCO:5443'
s EV-to-EBITDA Range Over the Past 10 Years
Min: 4.43 Med: 10.96 Max: 44.79
Current: 26.63
During the past 13 years, the highest EV-to-EBITDA of Gallant Precision Machining Co was 44.79. The lowest was 4.43. And the median was 10.96.
ROCO:5443's EV-to-EBITDA is ranked worse than 58.66% of 774
companies
in the Semiconductors industry
Industry Median: 22.34
vs ROCO:5443: 26.63
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio to determine the fair market value of a company.
Gallant Precision Machining Co (ROCO:5443) EV-to-EBITDA Explanation
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Gallant Precision Machining Co's PE Ratio (TTM) for today is calculated as:
Gallant Precision Machining Co's share price for today is NT$105.50.
Gallant Precision Machining Co's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$2.260.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Study has found that the companies with the lowest EV-to-EBITDA outperforms companies measured as cheap by other ratios such as PE Ratio (TTM).
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:5443 vs LRCX, AMAT, KLAC: EV-to-EBITDA Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's EV-to-EBITDA, along with its competitors' market caps and EV-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co EV-to-EBITDA vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's EV-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's EV-to-EBITDA falls into.
Gallant Precision Machining Co's current Enterprise Value is NT$22,491 Mil.
Gallant Precision Machining Co's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$844 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co (ROCO:5443) has a EV-to-EBITDA of 26.64 as of Sep. 12, 2026. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Gallant Precision Machining Co. This is 143% above median its historical median of 10.96. Over the past decade, Gallant Precision Machining Co's EV-to-EBITDA has ranged from 4.43 to 44.79. According to the industry distribution chart, Gallant Precision Machining Co ranks #454 out of 774 companies in the Semiconductors industry, placing it in the top 58.7%.
Is Gallant Precision Machining Co's EV-to-EBITDA too high?
Gallant Precision Machining Co's current EV-to-EBITDA of 26.64 is 143% above median its 10-year median of 10.96. Over the past 10 years, this metric has ranged from a low of 4.43 to a high of 44.79. The Semiconductors industry median EV-to-EBITDA is 22.34. Gallant Precision Machining Co's value of 26.64 is 19.2% above this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #454 out of 774 companies in the Semiconductors industry, which is below the industry midpoint. Overall, Gallant Precision Machining Co has a GF Score™ of 77/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's EV-to-EBITDA compare to LRCX and AMAT?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #454 out of 774 companies for EV-to-EBITDA. This places Gallant Precision Machining Co in the lower half of its industry. The industry median EV-to-EBITDA is 22.34. Gallant Precision Machining Co's value of 26.64 is 19.2% above this benchmark. Historically, Gallant Precision Machining Co's own EV-to-EBITDA has ranged from 4.43 to 44.79 over the past decade. While the company's 10-year median is 10.96 vs. the industry median of 22.34, Gallant Precision Machining Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBITDA for a Semiconductors company?
The median EV-to-EBITDA among Semiconductors companies is 22.34, based on 774 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current EV-to-EBITDA of 26.64 is 19.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBITDA mean?
A high EV-to-EBITDA can signal that a stock is expensive relative to its fundamentals. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Gallant Precision Machining Co. For the Semiconductors industry, the median EV-to-EBITDA is 22.34 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current EV-to-EBITDA is 26.64, which is 143% above median its own 10-year median of 10.96. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$93.54, compared to a current price of NT$105.50 — trading 12.8% above its estimated fair value. The current EV-to-EBITDA is 26.64, which is 143% above median its 10-year median of 10.96 and 19.2% above the Semiconductors industry median of 22.34. Gallant Precision Machining Co's overall GF Score™ is 77/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBITDA calculated?
EV-to-EBITDA is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current EV-to-EBITDA is 26.64 as of Sep. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$105.50 is trading 12.8% above its estimated GF Value™ of NT$93.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
EV-to-EBITDA: 26.64 (143% above median its 10-year median of 10.96)
GF Value™: NT$93.54 vs. price of NT$105.50 (12.8% above fair value)
Industry Position: 19.2% above the Semiconductors median (#454 of 774)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
77GF Score
Get the complete analysis for ROCO:5443
EV-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
