Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Gallant Precision Machining Co (ROCO:5443) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Gallant Precision Machining Co EBITDA Margin % Related Terms
Gallant Precision Machining Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co EBITDA Margin % Chart
ROCO:5443 vs AMAT, LRCX, KLAC: EBITDA Margin % Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co EBITDA Margin % vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co (ROCO:5443) has a EBITDA Margin % of 17.28% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Gallant Precision Machining Co and its competitors. This is 44% above median its historical median of 12.04. Over the past decade, Gallant Precision Machining Co's EBITDA Margin % has ranged from 8.68 to 17.44. According to the industry distribution chart, Gallant Precision Machining Co ranks #370 out of 1023 companies in the Semiconductors industry, placing it in the top 36.2%.
Is Gallant Precision Machining Co's EBITDA Margin % too high?
Gallant Precision Machining Co's current EBITDA Margin % of 17.28% is 44% above median its 10-year median of 12.04. Over the past 10 years, this metric has ranged from a low of 8.68 to a high of 17.44. The Semiconductors industry median EBITDA Margin % is 10.71. Gallant Precision Machining Co's value of 17.28% is 61.3% above this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #370 out of 1023 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's EBITDA Margin % compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #370 out of 1023 companies for EBITDA Margin %. This puts Gallant Precision Machining Co in the upper half of its industry. The industry median EBITDA Margin % is 10.71. Gallant Precision Machining Co's value of 17.28% is 61.3% above this benchmark. Historically, Gallant Precision Machining Co's own EBITDA Margin % has ranged from 8.68 to 17.44 over the past decade. While the company's 10-year median is 12.04 vs. the industry median of 10.71, Gallant Precision Machining Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Semiconductors company?
The median EBITDA Margin % among Semiconductors companies is 10.71, based on 1,023 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current EBITDA Margin % of 17.28% is 61.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median EBITDA Margin % is 10.71 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current EBITDA Margin % is 17.28%, which is 44% above median its own 10-year median of 12.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.00 — trading 29.3% above its estimated fair value. The current EBITDA Margin % is 17.28%, which is 44% above median its 10-year median of 12.04 and 61.3% above the Semiconductors industry median of 10.71. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current EBITDA Margin % is 17.28% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.00 is trading 29.3% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
EBITDA Margin %: 17.28% (44% above median its 10-year median of 12.04)
GF Value™: NT$83.54 vs. price of NT$108.00 (29.3% above fair value)
Industry Position: 61.3% above the Semiconductors median (#370 of 1023)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
