Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Gallant Precision Machining Co (ROCO:5443) Forward PE Ratio Explanation
The Forward PE Ratio of a company is often used to compare current earnings to estimated future earnings, as well as gaining a clearer picture of what earnings will look like without charges and other accounting adjustments. If earnings are expected to grow in the future, the Forward PE Ratio will be lower than the current PE Ratio. This measure is also used to compare one company to another with a forward-looking focus.
Trailing PE Ratio relies on what is already done. It uses the current share price and divides by the total EPS (Basic) over the past 12 months. PE Ratio can be affected by Non Operating Income such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio .
Gallant Precision Machining Co Forward PE Ratio Related Terms
Gallant Precision Machining Co Forward PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co Forward PE Ratio Chart
Gallant Precision Machining Co Annual Data
Trend
2024-12
Forward PE Ratio
327.14
Gallant Precision Machining Co Quarterly Data
2024-12
2025-03
2025-06
2026-06
Forward PE Ratio
327.14
226.29
250.00
283.43
ROCO:5443 vs AMAT, LRCX, KLAC: Forward PE Ratio Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's Forward PE Ratio, along with its competitors' market caps and Forward PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co Forward PE Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's Forward PE Ratio distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's Forward PE Ratio falls into.
Gallant Precision Machining Co Forward PE Ratio Calculation
It's a measure of the price-to-earnings ratio (PE Ratio) using forecasted earnings for the calculation. While the earnings used are just an estimate and are not as reliable as current earnings data, there is still benefit in estimated P/E analysis. The forecasted earnings used in the formula can either be for the next 12 months or for the next full-year fiscal period.
Gallant Precision Machining Co (ROCO:5443) has a Forward PE Ratio of 269.71 as of Aug. 21, 2026. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Gallant Precision Machining Co and its competitors. According to the industry distribution chart, Gallant Precision Machining Co ranks #524 out of 554 companies in the Semiconductors industry, placing it in the top 94.6%.
Is Gallant Precision Machining Co's Forward PE Ratio too high?
Gallant Precision Machining Co's current Forward PE Ratio is 269.71. The Semiconductors industry median Forward PE Ratio is 30.27. Gallant Precision Machining Co's value of 269.71 is 791% above this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #524 out of 554 companies in the Semiconductors industry, which is in the bottom quartile relative to peers. Overall, Gallant Precision Machining Co has a GF Score™ of 76/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's Forward PE Ratio compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #524 out of 554 companies for Forward PE Ratio. This places Gallant Precision Machining Co in the lower half of its industry. The industry median Forward PE Ratio is 30.27. Gallant Precision Machining Co's value of 269.71 is 791% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward PE Ratio for a Semiconductors company?
The median Forward PE Ratio among Semiconductors companies is 30.27, based on 554 companies in the industry. Companies in the top quartile (top 25%) have a Forward PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Forward PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current Forward PE Ratio of 269.71 is 791% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward PE Ratio mean?
A high Forward PE Ratio can signal that a stock is expensive relative to its fundamentals. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median Forward PE Ratio is 30.27 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current Forward PE Ratio is 269.71. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$93.54, compared to a current price of NT$104.00 — trading 11.2% above its estimated fair value. The current Forward PE Ratio is 269.71 and 791% above the Semiconductors industry median of 30.27. Gallant Precision Machining Co's overall GF Score™ is 76/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward PE Ratio calculated?
Forward PE Ratio is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current Forward PE Ratio is 269.71 as of Aug. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$104.00 is trading 11.2% above its estimated GF Value™ of NT$93.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
Forward PE Ratio: 269.71
GF Value™: NT$93.54 vs. price of NT$104.00 (11.2% above fair value)
Industry Position: 791% above the Semiconductors median (#524 of 554)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
76GF Score
Get the complete analysis for ROCO:5443
Forward PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
