Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Gallant Precision Machining Co (ROCO:5443) Gross Margin % Explanation
Warren Buffett believes that firms with excellent long term economics tend to have consistently higher margins.
Durable competitive advantage creates a high Gross Margin % because of the freedom to price in excess of cost. Companies can be categorized by their Gross Margin %
1. Greater than 40% = Durable competitive advantage
2. Less than 40% = Competition eroding margins
3. Less than 20% = no sustainable competitive advantage
Consistency of Gross Margin is key
Gallant Precision Machining Co had a gross margin of 32.99% for the quarter that ended in Dec. 2025 => Competition eroding margins
Be Aware
If a company loses its competitive advantages, usually its gross margin declines well before its sales declines. Watching Gross Margin % and Operating Margin % closely helps avoid value trap situations.
Gallant Precision Machining Co Gross Margin % Related Terms
Gallant Precision Machining Co Gross Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co Gross Margin % Chart
ROCO:5443 vs AMAT, LRCX, KLAC: Gross Margin % Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's Gross Margin %, along with its competitors' market caps and Gross Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co Gross Margin % vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's Gross Margin % distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's Gross Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
A positive Gross Profit is only the first step for a company to make a net profit. The gross profit needs to be big enough to also cover related labor, equipment, rental, marketing/advertising, research and development and a lot of other costs in selling the products.
Gallant Precision Machining Co (ROCO:5443) has a Gross Margin % of 32.99% as of Dec. 2025. Gross margin is the ratio of total gross profit to net sales. View historical data on Gallant Precision Machining Co and its competitors. This is 23% above median its historical median of 26.93. Over the past decade, Gallant Precision Machining Co's Gross Margin % has ranged from 23.71 to 35.09. According to the industry distribution chart, Gallant Precision Machining Co ranks #404 out of 1011 companies in the Semiconductors industry, placing it in the top 40%.
Is Gallant Precision Machining Co's Gross Margin % too high?
Gallant Precision Machining Co's current Gross Margin % of 32.99% is 23% above median its 10-year median of 26.93. Over the past 10 years, this metric has ranged from a low of 23.71 to a high of 35.09. The Semiconductors industry median Gross Margin % is 29.61. Gallant Precision Machining Co's value of 32.99% is 11.4% above this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #404 out of 1011 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's Gross Margin % compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #404 out of 1011 companies for Gross Margin %. This puts Gallant Precision Machining Co in the upper half of its industry. The industry median Gross Margin % is 29.61. Gallant Precision Machining Co's value of 32.99% is 11.4% above this benchmark. Historically, Gallant Precision Machining Co's own Gross Margin % has ranged from 23.71 to 35.09 over the past decade. While the company's 10-year median is 26.93 vs. the industry median of 29.61, Gallant Precision Machining Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Gross Margin % for a Semiconductors company?
The median Gross Margin % among Semiconductors companies is 29.61, based on 1,011 companies in the industry. Companies in the top quartile (top 25%) have a Gross Margin % significantly above this median, while those in the bottom quartile fall well below. However, Gross Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current Gross Margin % of 32.99% is 11.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Gross Margin % mean?
A high Gross Margin % can signal that a stock is expensive relative to its fundamentals. Gross margin is the ratio of total gross profit to net sales. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median Gross Margin % is 29.61 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current Gross Margin % is 32.99%, which is 23% above median its own 10-year median of 26.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.50 — trading 29.9% above its estimated fair value. The current Gross Margin % is 32.99%, which is 23% above median its 10-year median of 26.93 and 11.4% above the Semiconductors industry median of 29.61. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Gross Margin % calculated?
Gross Margin % is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current Gross Margin % is 32.99% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.50 is trading 29.9% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
Gross Margin %: 32.99% (23% above median its 10-year median of 26.93)
GF Value™: NT$83.54 vs. price of NT$108.50 (29.9% above fair value)
Industry Position: 11.4% above the Semiconductors median (#404 of 1011)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
Gross Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
