Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Interest Coverage is a ratio that determines how easily a company can pay interest expenses on outstanding debt. It is calculated by dividing a company's
Operating Income
by its Interest Expense. Gallant Precision Machining Co's
Operating Income
for the
three
months ended in Dec. 2025 was NT$132 Mil. Gallant Precision Machining Co's Interest Expense for the
three
months ended in Dec. 2025 was NT$-23 Mil.
Gallant Precision Machining Co's interest coverage for the quarter that ended in Dec. 2025 was 5.87.
The higher the ratio, the stronger the company's financial strength is.
The historical rank and industry rank for Gallant Precision Machining Co's Interest Coverage or its related term are showing as below:
ROCO:5443'
s Interest Coverage Range Over the Past 10 Years
Min: 1.48 Med: 14.25 Max: 25.66
Current: 5.84
ROCO:5443's Interest Coverage is ranked worse than 75.35% of 637
companies
in the Semiconductors industry
Industry Median: 20.5
vs ROCO:5443: 5.84
Gallant Precision Machining Co (ROCO:5443) Interest Coverage Explanation
Ben Graham requires that a company has a minimum interest coverage of 5 with the companies he invested. If the interest coverage is less than 2, the company is burdened by debt. Any business slow or recession may drag the company into a situation where it cannot pay the interest on its debt.
Interest Coverage is an important factor when GuruFocus ranks a company's overage Financial Strength .
Gallant Precision Machining Co Interest Coverage Related Terms
Gallant Precision Machining Co Interest Coverage Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Note: For Interest Coverage, "No debt" indicates no long-term debt. An indication of "No Debt" does not necessarily mean that the company has no long-term debt obligations; it could be due to missing data in the quarterly or annual report. Use caution when interpreting this information.
Gallant Precision Machining Co Interest Coverage Chart
ROCO:5443 vs AMAT, LRCX, KLAC: Interest Coverage Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's Interest Coverage, along with its competitors' market caps and Interest Coverage data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co Interest Coverage vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's Interest Coverage distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's Interest Coverage falls into.
Gallant Precision Machining Co Interest Coverage Calculation
Interest Coverage is a ratio that determines how easily a company can pay interest expenses on outstanding debt. It is calculated by dividing a company's Operating Income (EBIT) by its Interest Expense:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co (ROCO:5443) has a Interest Coverage of 5.87 as of Dec. 2025. Interest Coverage measures a company's capability to pay interest expenses on its debt. View historical data on Gallant Precision Machining Co and its competitors. This is 59% below median its historical median of 14.25. Over the past decade, Gallant Precision Machining Co's Interest Coverage has ranged from 1.48 to 25.66. According to the industry distribution chart, Gallant Precision Machining Co ranks #480 out of 637 companies in the Semiconductors industry, placing it in the top 75.4%.
Is Gallant Precision Machining Co's Interest Coverage too high?
Gallant Precision Machining Co's current Interest Coverage of 5.87 is 59% below median its 10-year median of 14.25. Over the past 10 years, this metric has ranged from a low of 1.48 to a high of 25.66. The Semiconductors industry median Interest Coverage is 20.50. Gallant Precision Machining Co's value of 5.87 is 71.4% below this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #480 out of 637 companies in the Semiconductors industry, which is in the bottom quartile relative to peers. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's Interest Coverage compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #480 out of 637 companies for Interest Coverage. This places Gallant Precision Machining Co in the lower half of its industry. The industry median Interest Coverage is 20.50. Gallant Precision Machining Co's value of 5.87 is 71.4% below this benchmark. Historically, Gallant Precision Machining Co's own Interest Coverage has ranged from 1.48 to 25.66 over the past decade. While the company's 10-year median is 14.25 vs. the industry median of 20.50, Gallant Precision Machining Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Interest Coverage for a Semiconductors company?
The median Interest Coverage among Semiconductors companies is 20.50, based on 637 companies in the industry. Companies in the top quartile (top 25%) have a Interest Coverage significantly above this median, while those in the bottom quartile fall well below. However, Interest Coverage should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current Interest Coverage of 5.87 is 71.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Interest Coverage mean?
A high Interest Coverage can signal that a stock is expensive relative to its fundamentals. Interest Coverage measures a company's capability to pay interest expenses on its debt. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median Interest Coverage is 20.50 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current Interest Coverage is 5.87, which is 59% below median its own 10-year median of 14.25. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.50 — trading 29.9% above its estimated fair value. The current Interest Coverage is 5.87, which is 59% below median its 10-year median of 14.25 and 71.4% below the Semiconductors industry median of 20.50. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Interest Coverage calculated?
Interest Coverage is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current Interest Coverage is 5.87 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.50 is trading 29.9% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
Interest Coverage: 5.87 (59% below median its 10-year median of 14.25)
GF Value™: NT$83.54 vs. price of NT$108.50 (29.9% above fair value)
Industry Position: 71.4% below the Semiconductors median (#480 of 637)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
Interest Coverage is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
