Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
This valuation method assumes that the stock valuation will revert to its historical (10-Year) median in terms of PS Ratio. The reason we use PS Ratio instead of PE Ratio or PB Ratio is because PS Ratio is independent of profit margin, and can be applied to a broader range of situations.
The historical rank and industry rank for Gallant Precision Machining Co's Median PS Value or its related term are showing as below:
ROCO:5443'
s Price-to-Median-PS-Value Range Over the Past 10 Years
Min: 1.1 Med: 2.11 Max: 4.37
Current: 3.77
During the past 13 years, the highest Price to Median PS Value of Gallant Precision Machining Co was 4.37. The lowest was 1.10. And the median was 2.11.
ROCO:5443's Price-to-Median-PS-Value is ranked worse than 86.25% of 538
companies
in the Semiconductors industry
Industry Median: 1.49
vs ROCO:5443: 3.77
Gallant Precision Machining Co (ROCO:5443) Median PS Value Explanation
This valuation method assumes that the stock valuation will revert to its historical (10-Year) mean in terms of PS Ratio. The reason we use PS Ratio instead of PE Ratio or PB Ratio
is because PS Ratio is independent of profit margin, and can be applied to a broader range of situations.
It also assumes that over time the profit margin is constant. If a company increases its profit margin to a sustainable level, this value might under-estimate its value. If it has permanent declined profit margins, this may over-estimate the company's value.
Gallant Precision Machining Co's Price to Median PS Value for today is calculated as
Price to Median PS Value
=
Share Price
/
Median PS Value
=
108.00
/
28.62
=
3.77
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co Median PS Value Related Terms
Gallant Precision Machining Co Median PS Value Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co Median PS Value Chart
ROCO:5443 vs AMAT, LRCX, KLAC: Median PS Value Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's Price-to-Median-PS-Value, along with its competitors' market caps and Price-to-Median-PS-Value data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co Price-to-Median-PS-Value vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's Price-to-Median-PS-Value distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's Price-to-Median-PS-Value falls into.
10-Year Median PS Ratio is 1.0041.
Gallant Precision Machining Co's Revenue per Share for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$28.503.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Precision Machining Co (ROCO:5443) has a Median PS Value of NT$28.62 as of Jul. 16, 2026. Median price-sales value is the stock value based on a company's 10-year median price-sales ratio, View historical data on Gallant Precision Machining Co and its competitors. This is 1256% above median its historical median of 2.11. Over the past decade, Gallant Precision Machining Co's Median PS Value has ranged from 1.10 to 4.37. According to the industry distribution chart, Gallant Precision Machining Co ranks #464 out of 538 companies in the Semiconductors industry, placing it in the top 86.2%.
Is Gallant Precision Machining Co's Median PS Value too high?
Gallant Precision Machining Co's current Median PS Value of NT$28.62 is 1256% above median its 10-year median of 2.11. Over the past 10 years, this metric has ranged from a low of 1.10 to a high of 4.37. Based on the distribution chart, Gallant Precision Machining Co ranks #464 out of 538 companies in the Semiconductors industry, which is in the bottom quartile relative to peers. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's Median PS Value compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #464 out of 538 companies for Median PS Value. This places Gallant Precision Machining Co in the lower half of its industry. The industry median Median PS Value is 1.49. Historically, Gallant Precision Machining Co's own Median PS Value has ranged from 1.10 to 4.37 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Median PS Value for a Semiconductors company?
The median Median PS Value among Semiconductors companies is 1.49, based on 538 companies in the industry. Companies in the top quartile (top 25%) have a Median PS Value significantly above this median, while those in the bottom quartile fall well below. However, Median PS Value should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Median PS Value mean?
A high Median PS Value can signal that a stock is expensive relative to its fundamentals. Median price-sales value is the stock value based on a company's 10-year median price-sales ratio, View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median Median PS Value is 1.49 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current Median PS Value is NT$28.62, which is 1256% above median its own 10-year median of 2.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.00 — trading 29.3% above its estimated fair value. The current Median PS Value is NT$28.62, which is 1256% above median its 10-year median of 2.11. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Median PS Value calculated?
Median PS Value is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current Median PS Value is NT$28.62 as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.00 is trading 29.3% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
Median PS Value: NT$28.62 (1256% above median its 10-year median of 2.11)
GF Value™: NT$83.54 vs. price of NT$108.00 (29.3% above fair value)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
Median PS Value is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
